• Journal of the Optical Society of Korea
• /
• 제15권2호
• /
• pp.161-167
• /
• 2011

In this paper, we propose an in-plane switching (IPS) mode for liquid crystal displays (LCDs) that, in principle, is free of retardation of the LC cell. Basically, the optical configuration of the LC cell consists of an A-plate and an LC layer for switching between the dark and bright states. We could achieve a fast response time compared with the conventional in-plane LC cell because the free retardation condition of the proposed LC cell enables us to reduce the cell gap even by quarter-wave retardation without any change of the optimized LC material in the transmissive mode. Experiments for verification of the proposed in-plane switching LC cells have shown a significant reduction of the rising time and falling time simultaneously due to the small cell gap. Furthermore, we also proposed an optical configuration for wide viewing property of the retardation free IPS LCD by applying the optical films. We proved the wide-view property of the retardation free IPS LCD by comparing its optical luminance with the calculated optical property of the conventional IPS LCD.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.236-238
• /
• 2005

In this paper, we propose a new discrete-time predictive current controller for a PMLSM(permanent magnet linear synchronous motor). The main objectives of the current controllers are that the measured stator current is tracked the command current value accurately and the transient interval is shorten as much as possible, in order to obtain high-performance of ac drive system. The conventional predictive current controller is hard to implement in full digital current controller since a finite calculation time causes a delay between the current sensing time and the time that take to apply the voltage to motor. A new control strategy is the schema that gets the fast adaptation of transient current change, the fast transient response tracking. Moreover, the simulation results will be verified the improvements of Predictive controller and accuracy of the current controller.

• 방송공학회논문지
• /
• 제20권4호
• /
• pp.632-640
• /
• 2015

본 논문에서는 오디오 이퀄라이저의 정확한 주파수 응답을 그래픽으로 빠르게 표현하는 방법을 제안한다. 주파수 축을 로그 스케일로 나타낼 경우 저대역의 정확한 주파수 응답을 표현하기 위하여 높은 해상도로 주파수 응답을 구해야 한다. 그러나 높은 해상도의 주파수 응답을 구하기 위해 많은 계산량이 필요하고, 이에 따라 주파수 응답의 그래픽 표현을 실시간으로 제공하기 어렵다. 이와 같은 계산량 문제를 해결하기 위하여 본 논문에서는 낮은 해상도로 중대역에서 구한 가상 주파수 응답을 이용하는 방법을 제안한다. 이퀄라이저를 구성하는 각 필터에 대하여 중대역에서 가상 주파수 응답을 구한 후 원하는 주파수 위치로 이동하여 해당 필터의 주파수 응답을 구하고, 모든 필터의 주파수 응답을 결합하여 이퀄라이저의 최종 주파수 응답을 구한다. 실험을 통하여 제안한 방법으로 구한 주파수 응답이 많은 계산량을 사용하여 높은 해상도로 구한 주파수 응답과 동등한 모양을 가지는 것을 확인하였다.

• 지능정보연구
• /
• 제16권3호
• /
• pp.163-179
• /
• 2010

최근 패션산업에서는 고객의 니즈가 다양해지고 공급 리드타임이 크게 단축됨에 따라 최신 유행을 즉각 반영한 디자인, 빠른 상품 회전율로 승부하는 패스트 패션이 각광받고 있다. 또한, 기업간 경쟁도 심화되면서 얼마나 신속하게 효율적으로 고객의 니즈를 만족시킬 것인가가 패션산업의 중요한 성공요인으로 강조되고 있다. 따라서, 다품종 소량 신속생산이 강조되는 패스트 패션 산업에서는 트랜드 변화에 신속 대응을 지원하는 지능형 신속대응시스템(Intelligent Quick Response System : IQRS) 구축 및 지원을 절실히 요구하고 있다. 본 논문은 패스트 패션 산업 IQRS 구축에서 요구되는 신속대응 프로세스 수립, 지능적 판단을 지원하는 신속대응 기준 및 실행, 신속대응 물량 산정 및 시기 의사결정 모델을 제시하였다. 또한, 신속대응 의사결정의 합리성을 검증할 수 있는 KPI(Key Performance Indicator)를 설계하여 모델의 신뢰도를 향상시켰다. 제시된 각 모델은 A사의 ERP 구현사례를 통해 실용성을 검증하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권6호
• /
• pp.313-320
• /
• 2002

In this paper, a new current controller with fast transient response is Proposed. The basic concept is to find the optimal control voltage for tracking the reference current with minimum time under the voltage limit constraint. The generalized solution of the minimum time current control in the systems are presented in this paper. With the generalized solution, the minimum time current controller can be easily applied to all the 3-phase balanced system. Through the simulation and the experiment, it is observed that the proposed controller has much less transient time than the conventional synchronous PI regulator.

• Journal of Electrical Engineering and Technology
• /
• 제6권6호
• /
• pp.769-775
• /
• 2011

Custom power devices such as dynamic voltage restorer (DVR) and DSTATCOM are used to improve the power quality in distribution systems. These devices require real power to compensate the deep voltage sag during sufficient time. An interline DVR (IDVR) consists of several DVRs in different feeders. In this paper, a neural network is proposed to control the IDVR performance to achieve optimal mitigation of voltage sags, swell, and unbalance, as well as improvement of dynamic performance. Three multilayer perceptron neural networks are used to identify and regulate the dynamics of the voltage on sensitive load. A backpropagation algorithm trains this type of network. The proposed controller provides optimal mitigation of voltage dynamic. Simulation is carried out by MATLAB/Simulink, demonstrating that the proposed controller has fast response with lower total harmonic distortion.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2002년도 추계학술발표논문집
• /
• pp.246-248
• /
• 2002

This paper presents computer simulations of the stacking and transfer system for the fast freeform fabrication system. The stacking and transfer system is essential for the fast freeform fabrication system and its stable motion is very important fer the consistent stacking of the cut slices. The stacking and transfer system cane be modeled as a pneumatic system. The system consists of air compressor, the control valve, and the cylinder. The governing parameters have been changed and the simulation results are shown to predict the time response of the system. The results shows some parameters should be correctly tuned to obtain stable system response.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1727_1728
• /
• 2009

Nowadays DC-DC converter has been used widely in electronic production. It has a high requirement in wide input voltage, load variations, stability, providing a fast transient response and lower overshoot. However, it is not easy to be controlled because of its nonlinearity. In this paper, the nonlinear model of DC-DC converter is approximatedby four linear models and sub-controllers are designed by using the LMI guaranteeing the stability of the sub-systems at the same time. For the robust of the control system, an integral sliding mode control (ISMC) is applied together with LMI fuzzy controller. The proposed controller supports a fast and almost no overshooting transient response for the DC-DC converter control.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.423-426
• /
• 2002

New driving waveform which can be inferred by analyzing fundamental LC mechanism is suggested. The main idea of the new waveform is the stabilizing LC layer fast in the cell by controlling the middle director of LC layer. Consequently, we can get not only numerical reduction of optical response merely but also the change of dynamic transmittance from applied voltage exactly

• 전기학회논문지
• /
• 제61권12호
• /
• pp.1843-1847
• /
• 2012

Piezo devices have large power density and simple structure. They can generate larger force than the conventional actuators. It has also wide bandwidth with fast response in a compact size. Thus the piezo devices are expected to be used widely in the future for small actuators with fast response time and large actuating force. However, the piezo actuators need high voltage with high driving current due to their large capacitive property. In this paper, we propose a simple method to drive piezo devices using voltage inversion circuit with coil inductance. Experiments with real circuit demonstrates that the proposed scheme can improve the energy efficiency very much.