• Journal of Animal Science and Technology
• /
• v.50 no.5
• /
• pp.581-590
• /
• 2008

Growth curves for ultrasonic carcass traits such as longissimus muscle area, backfat thickness and marbling score as well as chest girth which was simultaneously measured when carcass traits were investigated using ultrasound measuring technique were estimated to identify growth patterns and to adjust maturing effects in order to evaluating genetic merits on cows in farming basis. 27,410 records from 22,451 cows on which of 15~90 month of age were investigated from the national wide of Korea using by ultrasonic scanning techniques by the skilled persons from 2002 to 2007. Van Bertalanffy growth function was applied for estimating growth curves on these traits. Carcass traits and chest girth would be linearly increased by body condition score. It might be used for multiplicative correction factors for pre- adjustment on the body condition scores. Growth pattern on chest girth would be quickly reached to mature size and stable on after reached to asymptotic mature size. Longissimus muscle area would also be reached to mature size but little smoother than chest girth. Otherwise, growth curve on backfat thickness would be steadily increasing up to 7 years of age. It also showed large individual difference by way of mean square error. Marbling score would be steadily increased but sharper than those on backfat thickness. It would be reached to mature size up at 5 years of age. Those growth curves would be used for correcting function on age at investigating on genetic evaluation system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.4
• /
• pp.436-442
• /
• 2011

To obtain the engine output correctly is basically very important factor for estimating a engine performance. But, it has been reported that the IHP measured from electronic indicator such as MIPS(Mean Indication Pressure System) has a deviation compared to mechanical indicator. It was reported by authors that the uncertainty of crank angle for TDC position could be one of the reasons. In this paper, the uncertainty of crank angle for TDC position and its influence to engine output were investigated respectively about M/E and G/E for marine diesel engines. For the purpose, two sampling methods of pressure in cylinder were considered which were 'angle base sampling' and 'time base sampling'. Angle base sampling is real crank angle acquired from angle encoder which is attached to crank shaft and time base sampling is crank angle calculated by detected revolution with Z-pluse of encoder. Time base sampling is same method of MIPS. This paper concluded that time base sampling method is not suitable for obtaining the output of marine diesel engine on board because of instantaneous speed variation and load fluctuation. Also it is verified that the variation of engine speed by load fluctuation should be one of reasons additionally in case of M/E.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.9
• /
• pp.667-674
• /
• 2014

A ship's propulsion shafting system is subjected to varying magnitudes of intermittent loadings that pose great risks such as failure. Consequently, the dynamic characteristic of a propulsion shafting system must be designed to withstand the resonance that occurs during operation. This resonance results from hydrodynamic interaction between the propeller and fluid. For ice-class vessels, this interaction takes place between the propeller and ice. Producing load- and resonance-induced stresses, the propeller-ice interaction is the primary source of excitation, making it a major focus in the design requirements of propulsion shafting systems. This paper examines the transient torsional vibration response of the propulsion shafting system of an ice-class research vessel. The propulsion train is composed of an electric motor, flexible coupling, spherical gears, and a propeller configuration. In this paper, the theoretical analysis of transient torsional vibration and propeller-ice interaction loading is first discussed, followed by an explanation of the actual transient torsional vibration measurements. Measurement data for the analysis were compared with an applied estimation factor for the propulsion shafting design torque limit, and they were evaluated using an existing international standard. Addressing the transient torsional vibration of a propulsion shafting system with an electric motor, this paper also illustrates the influence of flexible coupling stiffness design on resulting resonance. Lastly, the paper concludes with a proposal to further study the existence of negative torque on a gear train and its overall effect on propulsion shafting systems.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.6
• /
• pp.467-477
• /
• 2017

The live load effect of KL-510 of the current Korean bridge design code is examined by comparing with that of the multiple trucks of which the weights are statistically estimated from measured traffic data as well as with those of the related live load models. The truck weight data measured on the expressway before and after overweight enforcement are used to obtain the truck weights following the same procedures in deciding the live load model of the design codes and the results are compared with the load effect of KL-510. KL-510 yields a very uniform loading effect compared with the multiple truck effects when the weights are estimated from the data which contains some of the heavy trucks over the operational weight limit. KL-510 yields consistent results with the live load of AASHTO LRFD and shows less variation than the past load model DB-24 over the span lengths considered in this study. As a result of this research, the actual truck combinations equivalent to the notional KL-510 load model are constructed and it can be applied to the evaluation of the existing bridge and the calibration of the load factor of the permit vehicle.

• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.123-135
• /
• 1999

The rapid increase of Passenger cars which is caused by the discomfort of Public transit and the Preference of automobiles is the major factor of increasing traffic congestions in Seoul With the point that leading the automobilists to the Public transit can be the most important Policy to ease these traffic congestions, this study focuses on the behavioral aspects of company employees and university students and investigates factors influencing bus ridership. To be brief, by estimating bus ridership through count models, this study investigates factors which influence bus ridership and elicits Political suggestions which lead automobilists to Public transit. The Purpose in this study is the application of appropriate count data model. The count data models have been widely applied to the economic area from the middle of the 1980s and to transportation aspect mainly in the foreign countries from the latter half of the 1980s. Even though a few studies in this country employed count data model to count data. all of them were Poisson regression models without suitable tests for the importance of the model specification. In the end, as the result of statistical test, negative binomial regression model which is suitable for overdispersed data was found to be appropriate for the data of weekly bus ridership. To emphasize the importance of model specification, both of poisson regression model and negative binomial regression model were estimated and the results were compared.

• Economic and Environmental Geology
• /
• v.45 no.1
• /
• pp.41-48
• /
• 2012

A theoretical $CO_2$ storage capacity is estimated on the southwestern continental shelf margin of Ulleung Basin, offshore Korea using 2D/3D multi-channel seismic and wellbore data acquired in the area over the two decades since the late 1980s. For the first time in Korea, the present study applies an efficiency factor to the capacity calculation, together with the other required parameters. For possible $CO_2$ storage volume estimation of the study area, we interpreted the seismic data in the Gorae area from 800 m to 3,000 m below the seafloor integrated with the well data, and identified five different seismic units; the limited depth interval is considered because of fluid state of $CO_2$ and tightness of the formation. The total volumes of each seismic unit were converted with a time-depth relation inferred from the checkshot surveys before the other required parameters including porosity and density were applied to compute the potential storage capacity. The accumulated possible storage volume from the five depositional units in the study area is estimated to be approximately 5,100 Mton ($P_{50}$). The approaches made in this study will be applied to the rest area of the basin and other continental shelves (i.e., Yellow Sea and northern part of East China Sea) in the next phase.

• The Journal of the Korea Contents Association
• /
• v.17 no.3
• /
• pp.532-541
• /
• 2017

Design is an extremely critical and important for the prosperity and development of a corporation, and design for children's facilities can be said to be a critical factor not only from a commercial perspective but also one of the critical factors that can be beneficial to the physical, intellectual and emotional growth and development of children. To measure the economic value of publicly designed children's facilities established with the purpose of children's design education, this research study utilized the Contingent Valuation Method. This research study attempts to provide useful information for policy administrators on the usage of both publicly designed children's facilities with high use value and also high non-use value through economic value measurement. To achieve the objectives of this research, the Contingent Valuation Method that utilized both open-ended questions and also double-bounded dichotomous choice methodologies was used. The results of the pre-verification that used the open-ended questions results from 50 test subject participants and the double-bounded dichotomous choice methodology results from 530 test subject participants confirmed that the average annual per person expense was estimated to be KRW 12,463. The gross benefit amount figure estimated for all households in the nation was estimated to be about KRW 219 billion annually.

• Analytical Science and Technology
• /
• v.26 no.2
• /
• pp.125-134
• /
• 2013

This study was demonstrated to estimate the measurement uncertainty of 23 multiple-component amino acids from beef bone extract by high performance liquid chromatography (HPLC). The sources of measurement uncertainty (i.e. sample weight, final volume, standard weight, purity, standard solution, calibration curve, recovery and repeatability) in associated with the analysis of amino acids were evaluated. The estimation of uncertainty obtained on the GUM (Guide to the expression of uncertainty in measurement) and EURACHEM document with mathematical calculation and statistical analysis. The content of total amino acids from beef bone extract was 36.18 g/100 g and the expanded uncertainty by multiplying coverage factor (k, 2.05~2.36) was 3.81 g/100 g at a 95% confidence level. The major contributors to the measurement uncertainty were identified in the order of recovery and repeatability (25.2%), sample pretreatment (24.5%), calibration-curve (24.0%) and weight of the reference material (10.4%). Therefore, more careful experiments are required in these steps to reduce uncertainties of amino acids analysis with a better personal proficiency improvement.

• Steel and Composite Structures
• /
• v.34 no.5
• /
• pp.743-767
• /
• 2020

Due to the impressive flexural performance, enhanced compressive strength and more constrained crack propagation, Fibre-reinforced concrete (FRC) have been widely employed in the construction application. Majority of experimental studies have focused on the seismic behavior of FRC columns. Based on the valid experimental data obtained from the previous studies, the current study has evaluated the seismic response and compressive strength of FRC rectangular columns while following hybrid metaheuristic techniques. Due to the non-linearity of seismic data, Adaptive neuro-fuzzy inference system (ANFIS) has been incorporated with metaheuristic algorithms. 317 different datasets from FRC column tests has been applied as one database in order to determine the most influential factor on the ultimate strengths of FRC rectangular columns subjected to the simulated seismic loading. ANFIS has been used with the incorporation of Particle Swarm Optimization (PSO) and Genetic algorithm (GA). For the analysis of the attained results, Extreme learning machine (ELM) as an authentic prediction method has been concurrently used. The variable selection procedure is to choose the most dominant parameters affecting the ultimate strengths of FRC rectangular columns subjected to simulated seismic loading. Accordingly, the results have shown that ANFIS-PSO has successfully predicted the seismic lateral load with R² = 0.857 and 0.902 for the test and train phase, respectively, nominated as the lateral load prediction estimator. On the other hand, in case of compressive strength prediction, ELM is to predict the compressive strength with R² = 0.657 and 0.862 for test and train phase, respectively. The results have shown that the seismic lateral force trend is more predictable than the compressive strength of FRC rectangular columns, in which the best results belong to the lateral force prediction. Compressive strength prediction has illustrated a significant deviation above 40 Mpa which could be related to the considerable non-linearity and possible empirical shortcomings. Finally, employing ANFIS-GA and ANFIS-PSO techniques to evaluate the seismic response of FRC are a promising reliable approach to be replaced for high cost and time-consuming experimental tests.

• Journal of Distribution Science
• /
• v.13 no.11
• /
• pp.101-109
• /
• 2015

Purpose - A traditional retail market is a place that offers economic opportunity to employees and employers alike it also is a place where the community can meet. The Korean government has invested three trillion won to improve physical and non-physical aspects in traditional retail markets since 2004. However, little research on this has been conducted. We explore this research gap that could lead to theory extension. We analyze consumption behavior with respect to traditional retail markets through an empirical analysis, thus overcoming limits in previous research. We empirically analyze policy effects of traditional retail market projects supported by the Korean government. Research design, data, and methodology - We propose a traditional retail market improvement plan via the relation between cause and effect resulting from the analysis. More specifically, logit analysis was carried out with 1,754 consumers in 16 cities nationwide. In order to analyze consumer consumption behaviors nationwide, the probability was analyzed using a logit model. This research analyzes the link between support and non-support by the Korean government using binary values. The dependent variable is whether Korean government support is implemented; the binomial logistic regression is used as the statistical estimation technique. The object variables are:1 (support) or 0 (nonsupport), and the prediction value is between 1 and 0. As a result of the factor analysis of questions related to attributes of service quality, four factors were extracted: convenience, product, facilities, and service. Results - The results indicate that convenience, product, and facilities have a significant influence on consumer satisfaction in accordance with the government's traditional retail market support. Additionally, the results reveal that convenience, product, facilities, and service all have a significant influence on consumer satisfaction in a traditional retail market's service quality and consumer satisfaction. Finally, the analysis indicates that the highly satisfied traditional retail market customer has a significant influence on revisit intention. Moreover, the results reveal that the highly satisfied traditional retail market customer has a significant influence on recommendation intention. Conclusions - This research focused on consumers nationwide to measure policy effects of traditional retail markets compared to previous research that focused on one traditional retail market or a specific area. We verified the relationship of service quality and customer satisfaction and consumer behavior based on service quality theory. The results indicate that consumer satisfaction of traditional retail markets supported by service quality factors has a significant impact. In a concrete form, the results indicate that these effects are from facility modernization projects and marketing support projects of the Korean government. The results also imply that these facility and management support effects from the Korean government have been consistent. We realize that the Korean government has to selectively support traditional retail markets in major cities and small and medium-sized cities. To that end, the Korean government needs to select a concentration strategy for the revitalization of traditional retail markets.