• Journal of Venture Innovation
• /
• v.5 no.2
• /
• pp.85-99
• /
• 2022

Dryers becoming commercially available for experimental and industrial use are classified to general drying oven, hot-air dryer, vacuum dryer, freezing dryer, etc. and kinds of them are various from the function, size and volume, etc. But the moisture measurement is not applied although it is important factor for the quality control and the performance improvement of products, and then now is very passive because the weight is weighed arbitrarily after dry-end. Generally the method for measuring moisture is divided by a direct measurement method and a indirect measurement method, and the former such as the change of weight or volume on the front and rear of separation of moisture, etc. is mainly used. Relatively a indirect measurement is very limited to apply due to utilize measurement apparatuses using temperature conductivity and micro-wave etc. In this research, we easily designed the moisture measurement system using the open-source based Arduino, and monitored moisture fluctuations and weight profiles in the real-time without the effect of external environment. Concretely the temperature-humidity and load cell sensors were packaged into a drying oven and the various change values were measured, and their sensors capable to operate 60℃ and 80℃ were selected to suitable for the moisture sensitive materials and the food dry. And also the performance safety using the organic samples of banana, pear, sawdust could be secured because the changes of evaporation rate as the dry time and temperature, and the measurement values of load cell appeared stable response characteristics through repeated experiments. Hereafter we judge that the reliability can be improved increasingly through the expansion of temperature-humidity range and the comparative analysis with CFD(Computational Fluid Dynamics) program.

• Steel and Composite Structures
• /
• v.49 no.2
• /
• pp.245-255
• /
• 2023

The present paper summarizes the results of an experimental program on the influence of using waste lathe scraps in the concrete mixture on the shear behavior of RC beams with different amounts of shear reinforcement. Three different volumetric ratios (1, 2 and %3) for the scraps and three different stirrup spacings (160, 200 and 270 mm) were adopted in the tests. The shear span-to-depth ratios of the beams were 2.67 and the stirrup spacing exceeded the maximum spacing limit in the building codes to unfold the contribution of lathe scraps to the shear resistances of shear-deficient beams, subject to shear-dominated failure (shear-tension). The experiments depicted that the lathe scraps have a pronounced contribution to the shear strength and load-deflection behavior of RC beams with widely-spaced stirrups. Namely, with the addition of 1%, 2% and 3% waste lathe scraps, the load-bearing capacity escalated by 9.1%, 21.8% and 32.8%, respectively, compared to the reference beam. On the other hand, the contribution of the lathe scraps to the load capacity decreases with decreasing stirrup spacing, since the closely-spaced stirrups bear the shear stresses and render the contribution of the scraps to shear resistance insignificant. The load capacity, deformation ductility index (DDI) and modulus of toughness (MOT) values of the beams were shown to increase with the volumetric fraction of scraps if the stirrups are spaced at about two times the beam depth. For the specimens with a stirrup spacing of about the beam depth, the scraps were found to have no considerable contribution to the load capacity and the deformation capacity beyond the ultimate load. In other words, for lathe scrap contents of 1-3%, the DDI values increased by 5-23% and the MOT values by 63.5-165% with respect to the reference beam with a stirrup spacing of 270 mm. The influence of the lathe scraps to the DDI and MOT values were rather limited and even sometimes negative for the stirrup spacing values of 160 and 200 mm.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.967-971
• /
• 2023

Recently, a variety of AI-based platform services are available, and one of them is ChatGPT that processes a large quantity of data in the natural language and generates an answer after self-learning. ChatGPT can perform various tasks including software programming in the IT sector. Particularly, it may help generate a simple program and correct errors using C Language, which is a major programming language. Accordingly, it is expected that ChatGPT is capable of effectively using Verilog HDL, which is a hardware language created in C Language. Verilog HDL synthesis, however, is to generate imperative sentences in a logical circuit form and thus it needs to be verified whether the products are executed properly. In this paper, we aim to select small-scale logical circuits for ease of experimentation and to verify the results of circuits generated by ChatGPT and human-designed circuits. As to experimental environments, Xilinx ISE 14.7 was used for module modeling, and the xc3s1000 FPGA chip was used for module embodiment. Comparative analysis was performed on the use area and processing time of FPGA to compare the performance of ChatGPT products and Verilog HDL products.

• Korean Journal of Cognitive Science
• /
• v.34 no.4
• /
• pp.315-347
• /
• 2023

This study aimed to investigate the semantic preview effect in the parafoveal processing of words that are presented in advance in the parafoveal area ahead of the fixation point, benefiting word processing in the fovea. Using the boundary technique in eye-tracking experiments, 25 Chinese-Korean bilinguals, whose native language is Chinese, were presented with 96 sentences that contained a mix of Chinese and Korean, where Korean words were associated with Chinese characters semantically. The study aimed to determine whether a semantic preview effect could be extracted in reading. The experimental sentences were divided into four conditions: the same Korean native word condition (e.g., "나라" meaning "country"), the same Korean word with semantic equivalent in Chinese condition (e.g., "국가" meaning "country"), the same Chinese condition with semantic equivalent in Korean (e.g., "国家" meaning "country"), and the unrelated Chinese condition to the target word (e.g., "围裙" meaning "apron"). The results showed a preview effect in both the Korean word and Chinese word conditions, with a larger preview effect observed in the Chinese word condition compared to the Korean word condition.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.2
• /
• pp.133-139
• /
• 2024

The purpose of this study was to investigate the effects of robot play linked to environmental picture books on the Environmentally Friendly attitudes of 5-year-old children. For this purpose, 24 5-year-old children from Seoul Y Kindergarten and 20 5-year-old children from E Kindergarten were selected as comparison subjects. In order to examine the differences between the groups, the experimental group performed 'Robot Play Linked to Environmental Picture Books' and the comparative group performed 'Free Play After Appreciating Environmental Picture Books'. The collected data were analyzed through independent sample t-test, which compares the average between the two groups using SPSS 29.0 statistical program. As a result of the study, there was a significant difference in all sub-areas of children's environment-friendly attitude(nature-friendly attitude, environmental preservation attitude), and these findings are meaningful as a basis for the direction of new environmental education of play-centered early childhood environmental education based on the value of new play media support called robot.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.2
• /
• pp.201-208
• /
• 2024

In this study, we investigated whether the evacuation time according to the exit installation standards specified in the building code during a food factory fire is compatible with the evacuation time based on the performance-based design specified by the fire department, in order to determine if evacuation safety is ensured. We used the Pathfinder program to confirm the evacuation time, and experimented with three scenarios for exit installation standards towards the outside of the building: 60m, 80m, and 100m. The target building in the experiment corresponded to the building code's exit installation standard of 100m from each dwelling. The experimental results showed tt in the cases of 80m and 100m, ASET exceeded RSET, indicating tt evacuation safety was not ensured, while in the case of 60m, evacuation safety was maintained. Through this study, it was confirmed tt even when the exit installation standards towards the outside of the building are met, evacuation safety may not be guaranteed.

• Journal of The Korean Association For Science Education
• /
• v.44 no.2
• /
• pp.141-153
• /
• 2024

The 2022 revised science curriculum aims to develop the ability to solve scientific problems arising in daily life and society based on convergent thinking stimulated through participation in research activities using artificial intelligence (AI). Therefore, we developed a science-AI convergence education program that combines the science curriculum with artificial intelligence and employed it in convergence classes for high school students. The aim of the science-AI convergence class was for students to qualitatively understand the movement of a damped pendulum and build an AI model to predict the position of the pendulum using the block coding platform KNIME. Individual in-depth interviews were conducted to understand and interpret the learners' experiences. Based on Giorgi's phenomenological research methodology, we described the learners' learning processes and changes, challenges and limitations of the class. The students collected data and built the AI model. They expected to be able to predict the surrounding phenomena based on their experimental results and perceived the convergence class positively. On the other hand, they still perceived an with the unfamiliarity of platform, difficulty in understanding the principle of AI, and limitations of the teaching method that they had to follow, as well as limitations of the course content. Based on this, we discussed the strengths and limitations of the science-AI convergence class and made suggestions for science-AI convergence education. This study is expected to provide implications for developing science-AI convergence curricula and implementing them in the field.

• Journal of Korea Water Resources Association
• /
• v.57 no.8
• /
• pp.493-507
• /
• 2024

RANS-based CFD analysis is widely applied in various engineering fields, including practical hydraulic engineering, due to its high computational efficiency. However, problems of non-physical behavior in the analysis of two phase flow, such as free surfaces, have long been raised. The two-equation turbulence models used in general RANS-based analysis were developed for single phase flow and simulate unrealistically high turbulence energy at the interface where there are abrupt changes in fluid density. To solve this issue, one of the methods recently developed is the buoyancy-modified turbulence model, which has been partially validated in coastal engineering, but has not been applied to open channel flows. In this study, the applicability of the buoyancy-modified turbulence model is evaluated using the VOF method in the open-source program OpenFoam. The results of the uniform flow showed that both the buoyancy-modified k-𝜖 model and the buoyancy-modified k-ω SST model effectively simulated the reduction of turbulence energy near the free surface. Specifically, the buoyancy-modified k-ω SST model accurately simulated the vertical velocity distribution. Additionally, the model is applied to dam-break flows to examine cases with significant surface variation and cavity formation. The simulation results show that the buoyancy-modified turbulence models produce varying results depending on the VOF method and shows non-physical behavior different from experimental results. While the buoyancy-modified turbulence model is applicable in cases with stable surface shapes, it still has limitations in general application when there are rapid changes in the free surface. It is concluded that appropriate adjustments to the turbulence model are necessary for flows with rapid surface changes or cavity formation.

• Journal of Society of Preventive Korean Medicine
• /
• v.28 no.2
• /
• pp.151-164
• /
• 2024

Objectives : Using MMSE and MoCA cognitive tools, this study tried to measure the effect of acupuncture differing by cognitive types. Through the method of PRISMA literature review, this study aimed to understand and improve the acupuncture's effectiveness in its application. Methods : The research method was a literature review and Cochrane meta-analysis of papers on the effectiveness of acupuncture treatments for mild cognitive impairment conducted from 2012 to 2023. The Cochrane risk of bias (RoB) tool was used as a quality analysis tool, and the meta-analysis tool was Cochrane RevMan V5.4.1 software. Results : As a result of the study, a total of 967 subjects were used for analysis, and 16 papers on randomized acupuncture trials were analyzed. The results are as follows: As a result of meta-analysis of acupuncture intervention for mild cognitive impairment, the MMSE score had an average of 1.61 with a 95% confidence interval ranging from 0.14 to 3.07, and a statistically significant result with p<0.001. The Z-score was 2.15, which corresponded to a p-value of 0.03. The MoCA score had an average range between 0.39 and 2.49, also showing statistical significance with p<0.001, and a Z-score of 2.70 (p=0.007). The effect of acupuncture in subjects with mild cognitive impairment was significant. Conclusion : The suggestions and conclusion indicate that acupuncture intervention has a significant effect on mild cognitive impairment. This study propose future experimental research on various types of acupuncture interventions for mild cognitive impairment. The significance of this study is that it presented basic data for the development of a preventive convergence cognitive intervention program for patients with mild cognitive impairment in the community.

• Clinical and Experimental Pediatrics
• /
• v.51 no.2
• /
• pp.134-144
• /
• 2008

Purpose : This study aimed to investigate body shape perception, weight control behaviors and eating habits of adolescent girls in urban, suburban and rural areas of Korea to obtain basis for establishing adequate weight control program for adolescent. Methods : From May 2002 to November 2002, a cross-sectional questionnaire survey and physical examination were conducted to examine body shape perception, weight control behaviors, eating habits and health status of 2,891 adolescent girls and 891 boys in Seoul, Ansan and Paju. Results : The proportion of underweight adolescent girl was decreased in rural area than in urban area. 46.3% of girls considered themselves to be somehow or very obese. Notably 3.2% of underweight girls considered themselves obese. 57.9% were unsatisfied with their own body shape. The proportion of dissatisfaction increased with age and body mass index (BMI), but there were no differences among area. The experiences of weight control increased by age, BMI and dissatisfaction of own body shape. The eating attitudes test-26 (EAT-26) score of girls was significantly higher than that of boys. The girls with high risk of eating disorder were 10.9%. And risk factors of eating disorder were living in urban area, severe stress for weight control excessive expenditure for appearance and think themselves unhealthy. Conclusion : The findings of this study demonstrate that there were serious impairment of body shape perception of adolescent girls and unhealthy, inadequate weight control behaviors were widely done. Therefore adequate weight control program for adolescent girl should be established promptly.