• Journal of the Mineralogical Society of Korea
• /
• v.15 no.3
• /
• pp.205-220
• /
• 2002

The gold-silver deposits in the Casado district were formed in the sheeted and stockwork quartz veins which fill the fault fractures in volcanic rocks. K-Ar dating of alteration sericite (about 70 Ma) indicates a Late Cretaceous age for ore mineralization. These veins are composed of quartz, adularia, carbonate, and minor of pyrite, sphalerite, chalcopyrite, galena, Ag-sulfosalts (argentite, pearceite, Ag-As-Sb-S system), and electrum. These veins are characterized by chalcedonic, comb, crustiform and feathery textures. Based on the hydrothermally altered mineral assemblages, regional alteration zoning associated with mineralization in the Gasado district is defined as four zones; advanced argillic (kaolin mineral-alunite-quartz), argillic (kaolin mineral-quartz), phyllic (quartz-sericite-pyrite) and propylitic (chlorite-carbonate-quartz-feldspar-pyroxene) zone. Phyllic and propylitic zones is distributed over the study area. However, advanced argillic zone is restricted to the shallow surface of the Lighthouse vein. Compositions of electrum ranges from 14.6 to 53.7 atomic % Au, and the depositional condition for mineralization are estimated in terms of both temperature and sulfur fugacity: T=245。$~285^{\circ}C$, logf $s_2$=$10^{-10}$ ~ $10^{-12}$ Fluid inclusion and stable isotope data show that the auriferous fluids were mixed with cool and dilute (158。~253$^{\circ}C$ and 0.9~3.4 equiv. wt. % NaCl) meteoric water ($\delta^{18}$ $O_{water}$=-10.1~8.0$\textperthousand$, $\delta$D=-68~64$\textperthousand$). These results harmonize with the hot-spring type of the low-sulfidation epithermal deposit model, and strongly suggest that Au-Ag mineralization in the Gasado district was formed in low-sulfidation alteration type environment at near paleo-surface.

• Archives of design research
• /
• v.16 no.4
• /
• pp.313-322
• /
• 2003

The residential and welfare facilities for the elderly are continuously increasing due to change of value on family under situation of aging population increase. And it is predicted that accommodation capacity of facilities for the elderly and its rate those facility takes compared to whole social welfare facilities will be accelerated considering past increase speed. On the other hand, about 60％ of elderly people have low physical and mental level almost dose to handicapped people therefore special environmental concerns helping their independent living are necessary. The purpose of this study is to analyze whether facilities for the elderly are adequate to accommodate their request condition by understanding color among environmental factors is one of most important factor for smooth understanding, communication and psychological remedy effect for thou. For this purpose, importance and effect of color and visual characteristic and reaction to color in elderly environment are researched through documents and visited 10 facilities in Seoul and Kyunggi region to research interior color status. And measuring of color on 5 main spaces of the facilities such as lobby/lounge, corridor, dining room, bedroom, stairway/ramp are done under analysis of its functional and aesthetic level based on Moon ＆ Spencer's color theory.

• Women's Health Nursing
• /
• v.2 no.1
• /
• pp.88-105
• /
• 1996

The purpose of this study was to find out physical and emotional status, and nursing needs of the pregnant women who were hospitalized by premature labor. The research respondents were 96 from four university hospitals located in Seoul, from June 30, 1996 to September 15, 1995. The research instrument was consisted of 14 items of physical status(discomforts) (Cronbach's=0.86), 17 items of emotional status (Cronbach's=0.89), 33 items of nursing needs (Cronbach's=0.94), and they were measured by 5 level of Likert Scale. The data were analyzed by frequency, percentage, mean standard deviation, ANOVA, Pearson correlation coefficient as the statistical techniques in the program of SPSS/$PC^+$. The findings were as follows : 1. The perception of physical status was mainly about physicl discomforts during the hospital stay. It included four categories about 'absolute bed rest' 3.48, 'hospital foods' 3.38, 'health care teams' 2.93, 'hospital environment' 2.83 in order of mean of discomforts. The most discomfortable one was "malodor by not doing personal hygiene." The next one was "urination and defecation on the bed using bedpan." 2. The perception of the emotional status was about negative mood related to 'fetus', 'hospitalization' perse, 'personal situation.' The highest score of negative mood was "I am afraid that the baby's condition will be bad if I deliver it before full term." The next one was "I am anxious about whether my baby will be in incubator if I deliver it before full term." 3. The highest mean score among items of nursing needs was "Nurses observe whether the labor come or not with concerns." The next one was "Nurses observe the fetal movement and check up the fetal heart sound." The lowest one was "Nurses help me when I need bedpan." 4. Nursing needs were consisted of four categories : professional, educational, emotional, and physical. The mean score of them was high in professional, educational, emotional, and physical need in order. 5. The physical status was related to "Experience of treatment for maintenance of pregnancy" and "Experience of hospitalization by premature labor". The emotional status was related to "Type of delivery" and "Type of habitation." 6. In the correlation of physical and emotional status, it showed positive correlation between them. The higher score of physical discomfort, the higher score of negative mood(r=0.5113, p=0.0001).

• Membrane Journal
• /
• v.21 no.2
• /
• pp.127-140
• /
• 2011

The effects of $TiO_2$ photocatalyst coating bead concentration, water-back-flushing period (FT), and back-flushing time (BT) were investigated in hybrid process of ceramic ultrafiltration and photocatalyst for advanced drinking water treatment in this study. Photocatalyst coating bead concentration was changed in the range of 10~40 g/L, FT in 2~10 min and BT in 6~30 sec. Then, we observed the effects on resistance of membrane fouling $(R_f)$, permeate flux (J) and total permeate volume $(V_{\Upsilon})$ during total filtration time of 180 min. As decreasing photocatalyst coating bead concentration, $R_f$ increased and J decreased. $V_{\Upsilon}$ was the highest value of 8.85 L at 40 g/L of photocatalyst coating bead concentration. At FT change experiment, $R_f$ decreased and J increased as decreasing FT. Then $R_f$ decreased and J increased according to increasing BT at BT change experiment. Because at NBF (no back-flushing) dramatic membrane fouling reduced membrane pore size, turbid and dissolved organic matters ($UV_{254}$ absorbance) could be removed efficiently. Therefore, treatment efficiencies of turbidity and dissolved organic matters were the highest at NBF. Then by cleaning effect of photocatalyst coating bead, the treatment efficiencies of turbidity and dissolved organic matters increased as decreasing FT and increasing BT.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.355-358
• /
• 2002

Since the 1960s, though there were brisk supply in apartment housing, there were no preparation in standard for to extend the life(durability) of apartment housing by maintaining the $social{\cdot}physical$ aspect of apartment housing, and in standard maintenance system. So problem such as facilities safety and residence environment has occurred. Like the condition written above, efficient usage of housing resource by the maintenance of apartment housings in a state of great urgency. In service aspect of apartment housing, establishment of accurate long term repair plan and estimate of repair appropriation fund can prevent housing's fast-deterioration. But to the performers of the maintenance, like house managers and the tenants at the subject building has little awareness of necessity in establishment of accurate long term repair plan and accumulation of repair appropriation fund. Unestablishment of long term repair plan arises problem such as approval of repair appropriation fund's unreasonable accumulation. Hence, for the utmost performance of apartment housing and to extend the economic life of a building, the method of establishment of long term repair plan and estimate of repair appropriation fund on reliable basis is to be proposed.

• Korean Journal of Poultry Science
• /
• v.16 no.1
• /
• pp.29-52
• /
• 1989

Selection of breeds, adequate environment and sanitary condition must be considered to improve production ability. Minimizing of production cost through reasonable management and farm system can introduce maximizing net income. Followings are the summary of poultry industry in Japan： (1) To decreasing consumers Price and to gurantee the quality of eggs, poultry farms changed their farm system as complex which contain feed factory, GP center and processing factory as well as raising laying hens. (2) Broiler farms moved from suburbs to several remote from cites owing to development of transferation , and rising price of land. (3) The egg Price in Japan was depended on season. From fall to spring, the Price was usually rised due to increased consumption, and from May to August the price always dropped. (4) The average production per one you was around 17kg/hen and average feed consumption was around 2.45. Rearing rate was around 98.5% and motality of hens was around 7%. And one person reared 15,000-20,000 hens in over 100 thousand chicken reared farms even though average ability per person showed 3,266 hens.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.2
• /
• pp.156-160
• /
• 1997

The combination of biological wastewater treatment process and membrane separation has many advantages such as better effluent quality and system stability over the conventional biological wastewater treatment process. In this study, direct membrane separation using nonwoven fabric was applied to biological wastewater treatment. A nonwoven fabric module was submerged in the aerated bioreactor. And accumulated biomass in the bioreactor was separated by suction. The system was operated with various condition to investigate pollutant removal efficiencies and flux. After formation of biomass layer on nonwoven fabric surface, a day, the stable effluent water quality was obtained. The flux decreased at a high suction pressure faster than a low pressure. The stable flux was obtained at the pressure of $21{\sim}25cmHg$. In spite of variation of hydraulic retention time, organic loading rate, the removal efficiencies of BOD, $COD_{Cr}$. $COD_{Mn}$ were very high as follows : $95.2%(0.14{\sim}0.97\;BODKg/m^3/day)$, $86.0%(0.17{\sim}1.39\;COD_{Cr}Kg/m^3/day)$, $90.0%(0.097{\sim}0.61\;COD_{Mn}Kg/m^3/day)$.

• Resources Recycling
• /
• v.19 no.4
• /
• pp.19-28
• /
• 2010

Attempts to increase the utilization of a by-products such as fly ash and blast furnace slag to partially replace the cement in concrete are gathering momentum. But most of by-products is currently dumped in landfills, thus creating a threat to the environment. Many researches on alkali-activated concrete that does not need the presence of cement as a binder have been carried out recently. However, most study deal only with alkali-activated blast furnace slag or fly ash, as for the combined use of the both, little information is reported. In this study, we investigated the influence of mixture ratio of fly ash/slag, type of alkaline activator and curing condition on the workability and compressive strength of mortar in oder to develop cementless alkali-activated concrete. In view of the results, we found out that the mixture ratio of fly ash/slag and the type of alkaline activator always results to be significant factors. But the influence of curing temperature in the strength development of mortar is lower than the contribution due to other factors. At the age of 28days, the mixture 50% fly ash and 50% slag activated with 1:1 the mass ratio of 9M NaOH and sodium silicate, develop compressive strength of about 65 MPa under $20^{\circ}C$ curing.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.6
• /
• pp.28-38
• /
• 2010

Community centers, silver towns and resting places are representative community facilities in rural villages. These community facilities affect villagers directly or indirectly in terms of life quality. Current community facilities of rural village are in poor condition in spite of their importance. In particular, the small size of community facilities and standardized programs are common issues in rural villages. As a result, it is necessary to research and investigate the improvement of community spaces and provide a variety of community activities. The purpose of this research is to provide appropriate area standards for 5 category community facilities(community centers, sliver towns, resting places, community yards, gymnasiums and recreation areas) and also to provide basic information for future village planning. The precedent study of community facilities was investigated. In addition, 25 rural villages in 5 districts were investigated regarding their facility conditions and current community satisfaction. As a result, appropriate rural village area standards are provided. The research results of the community facility standards are almost higher than the current representative community facilities average area. This is expected to improve the community facility environment, people's activities and to increase the growth of awareness in community.

• International Journal of Highway Engineering
• /
• v.5 no.4 s.18
• /
• pp.1-11
• /
• 2003

Recently, the new pavement design method considering Korean environment and the specification for improving performance of pavement are being developed in Korea. The Jointed Concrete Pavement Program Applying Load Discretization Algorithm (called HEART-JCP) is one of the results of Korea Pavement Research Project in Korea. HEART-JCP program is developed to analyze various loading condition using the load discretization algorithm without mesh refinement. In addition, it can be modified easily into multi-purpose concrete pavement nidyses program because of the modularized structure characteristic of HEART-JCP. The program consists of basic program part and load discretization part. In basic program part, the displacement and stress are computed in the concrete slab, sub-layer, and dowel bar, which are modeled with plate/shell element, spring element and beam element. In load discretization program part, load discretization algorithm that was used for the continuum solid element is modified to analyze the model with plate and shell element. The program can analyze the distributed load, concentrated load, thermal load and body load using load discretization algorithm. From the result of verification and sensitivity study, it was known that the loading position, the magnitude of load, and the thickness of slab were the major factors of concrete pavement behavior as expected. Since the result of the model developed is similar to the results of Westergaard solution and ILLISLAB, the program can be used to estimate the behavior of jointed concrete pavement reasonably.