• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.1
• /
• pp.28-35
• /
• 2006

An accurate prediction of budburst in grapevines is indispensable for vineyard frost warning system operations in spring because cold tolerance depends heavily on phonology. However, existing frost warning systems utilize only daily minimum temperature forecasts since there is no way to estimate the site-specific phonology of grapevines. A budburst estimation model based on thermal time was used to project budburst dates of two grapevine cultivars (Kyoho and Campbell Early), and advisories were issued depending on phonology as well as temperature. A 'warning' is issued if two conditions are met: the forecasted daily minimum temperature falls below $-1.5^{\circ}C$ and the estimated phonology is within the budburst period. A 'watch' is issued for a temperature range of -1.5 to $+1.5^{\circ}C$ with the same phonology condition. Validation experiments were done at 8 vineyards in Anseong in spring 2005, and the results showed a good agreement with the observations. This method was applied to the climatological normal year (1971-2000) to determine sites with high frost risk at a 30 m grid cell resolution. Among 608,585 grid cells constituting Anseong, 1,059 cells were identified as high risk for growing Kyoho and 2,788 cells for Campbell Early.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.3
• /
• pp.94-101
• /
• 2008

Warming trends during winter seasons in East Asian regions are expected to accelerate in the future according to the climate projection by the Inter-governmental Panel on Climate Change (IPCC). Warmer winters may affect short-term cold hardiness of deciduous fruit trees, and yet phenological observations are scant compared to long-term climate records in the regions. Dormancy depth, which can be estimated by daily temperature, is expected to serve as a reasonable proxy for physiological tolerance of flowering buds to low temperature in winter. In order to delineate the geographical pattern of short-term cold hardiness in grapevines, a selected dormancy depth model was parameterized for "Campbell Early", the major cultivar in South Korea. Gridded data sets of daily maximum and minimum temperature with a 270m cell spacing ("High Definition Digital Temperature Map", HDDTM) were prepared for the current climatological normal year (1971-2000) based on observations at the 56 Korea Meteorological Administration (KMA) stations and a geospatial interpolation scheme for correcting land surface effects (e.g., land use, topography, and site elevation). To generate relevant datasets for climatological normal years in the future, we combined a 25km-resolution, 2011-2100 temperature projection dataset covering South Korea (under the auspices of the IPCC-SRES A2 scenario) with the 1971-2000 HD-DTM. The dormancy depth model was run with the gridded datasets to estimate geographical pattern of change in the cold-hardiness period (the number of days between endo- and forced dormancy release) across South Korea for the normal years (1971-2000, 2011-2040, 2041-2070, and 2071-2100). Results showed that the cold-hardiness zone with 60 days or longer cold-tolerant period would diminish from 58% of the total land area of South Korea in 1971-2000 to 40% in 2011-2040, 14% in 2041-2070, and less than 3% in 2071-2100. This method can be applied to other deciduous fruit trees for delineating geographical shift of cold-hardiness zone under the projected climate change in the future, thereby providing valuable information for adaptation strategy in fruit industry.

• Resources Recycling
• /
• v.22 no.6
• /
• pp.3-11
• /
• 2013

This study was carried out to estimate greenhouse gas reduction potentials under treatment methods of combustible wastes excavated from closed landfill. The treatment methods of solid wastes were landfilling, incineration, and production of solid recovery fuel. The greenhouse gas reduction potentials were calculated using the default emission factor presented by IPCC G/L method of IPCC (Intergovernmental Panel on Climate Change). The composition of excavated waste represented that screened soil was the highest (65.96%), followed by vinyl/plastic (19.18%). This means its own component is similar to the other excavated waste from unsanitary landfill sites. Additionally, its bulk density was 0.74 $t/m^3$. In case of landfilling of excavated waste, greenhouse gas emission quantity was 60,542 $tCO_2$. In case of incineration of excavated waste, greenhouse gas emission quantity was 9,933 $tCO_2$. However, solid recovery fuel from excavated waste reduced 33,738 $tCO_2$ of the greenhouse gas emission quantity. Therefore, solid recovery fuel production is helpful to reduce of greenhouse gas emission.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.1
• /
• pp.71-81
• /
• 2002

The lack of specialties of the existing commercial web search systems stems from the fact that they have no capabilities to extract and gather the meaningful information from each information domain they cover. We are sure, however, that the necessity for the information integration system, not just search system, will be likely to become larger in the future. In this paper, we propose a design and implementation of an information integration system called TIC(target information collector). TIC is able to extract meaningful information from a specific information area in the internet and integrate them for the commercial service. We also show the evaluation results of our implementation. For the experiments we applied our TIC to the international procurement information area. The international procurement information is publicly and freely announced by each government to the world. To automatically extract common properties from the related source sites, we adopt information pointing technique using inter-HTML tag pattern parsing. And through the information integration framework design, we can easily implement a site-specific information integration engine. By running our TIC for about 8 months, we find out it can remove considerable amount of the duplicated information, and as a result, we can obtain high quality international procurement information. The main contribution of this paper is to present a framework design and it's implementation for extracting the information of a specific area and then integrating them into a meaningful one.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.369-375
• /
• 2011

Purpose: Many hemostatic agents and dressings have been tested with variable degree of success. Chitosan has a positive charge, it attracts red blood cells, which have a negative charge. Our goal is to test the efficacy of new developed chitosan-based hemostatic materials in providing durable hemostasis in a high-flow arterial wound model. Methods: We compared each group with SD rats motality tests and in vitro blood compatibility test by blood clotting index (BCI). We devided the SD rats into 6 groups (N =15) by type of hemostatic agents. A: 100% nonwoven chitosan (degree of the deacetylation: 90%). B: 50% N-acetylation on nonwoven of chitosan gel (degree of the deacetylation: 50%). C: 60% N-acetylation on nonwoven of chitosan ge (degree of the deacetylation: 40%)l. D: Cutanplast$^{(R)}$. E: HemCon$^{(R)}$ F: Gauze. In vivo test, a proximal arterial injury was created in unilateral femoral arteries of 90 anesthetized SD rats. Each materials was made same size and thickness then applied to the injury site for 3 minutes. In vitro test, we compared each group with BCI in human blood. Results: In vivo test, group A showed lower motality rate of 46% than any other groups, Group B and C showed lower motality rate of 60% than group D and E's motality rate of 66%. In vitro test, BCI of group A ($30.6{\pm}1.2$) and B ($29.3{\pm}1.0$) were showed nearly about group D ($29.1{\pm}1.8$) and E ($27.4{\pm}1.6$). Group C ($37.1{\pm}2.0$) showed higher BCI than group A and B, it means group C decreased blood clotting. Conclusion: In conclusion, this study suggests a newly developed chitosan-based hemostatic materials induced durable hemostasis and increased blood clotting, and are considered as effective biologic hemostatic agents.

• Journal of Wetlands Research
• /
• v.15 no.3
• /
• pp.329-337
• /
• 2013

This study was performed to evaluate the temporal and spatial variations of the water quality at stream flowing into the Suncheon bay in Suncheon city from October 2008 to August 2009 and to estimate the pollutant sources from the streams using multivariate analysis. Water qualities from Seo stream, Dong stream, Ok stream were evaluated as I grade(very good) that compared to the Water Quality Standard. But Haeryong stream and inlet site of Suncheon Bay in BOD were evaluated as a little bad and fair. Water quality at the stream flowing into the Suncheon Bay was could be explained up to 92.8% by three factors which were included in loading of nutrients, organic matter and total coliform group by the allochthonous matters(53.7%), Topographic Factors(25.0%), seasonal variation(14.2%). The concentrations of total nitrogen and phosphorus at sewage treatment plant and organic matters at Haeryong stream were higher than that of others, respectively. From principal component analysis and factor analysis, it could be suggested that it is very important to make an effort to reduce the nutrients and organic matters from sewage treatment plant and Haeryong stream to be in good conservation of the Suncheon bay.

• Korean Journal of Microbiology
• /
• v.32 no.2
• /
• pp.102-108
• /
• 1994

Autonomously replicating sequence Binding Factor 1(ABF1) is a DNA-binding protein that specifically recognizes the $RTCRYN_5ACG$ at many sites in the yeast genome including the promoter element, mating-type silencer and ARS. To express the intact full-length ABF1 gene in E. coli, the ABF1 gene has been cloned into pMAL-c2 and His-61, Leu-353 and Leu-360 were substituted with other amino acid. ABF1 fusion proteins of wild type ABF1 and H61A, L353R and L360R nutants were purified by amylose resin affinity chromatography. Fusion protein of MBP and ABF1 was digested by Factor Xa and Characterized by gel retardation assay and complementation test. As aresult, we suggested that other DNA binding motif except atypical inc-finger motif is in the middle region of ABF1.

• Tunnel and Underground Space
• /
• v.23 no.3
• /
• pp.180-191
• /
• 2013

The purpose of this research was to find an optimal quarrying for marble by analyzing the applicability and the work efficiency of a chain saw machine newly introduced in the underground Baekwoon mine. From the test results of the physical properties of Baekwoon marble, which affects the efficiency of rock cutting, it was found to have similar physical characteristics as the ones which are now being produced in the other areas in Korea. And especially it shows isotropic property, which can be thought to be advantageous as a dimensional stone. To check the long-term quality of the marble as a stone material, several tests such as corrosion resistance test and abrasion test were carried out. It was found to be vulnerable to acid rain with decrease of weight and seismic wave velocity after applying artificial rain at pH 5.6 for 50 times. The percentage of wear from abrasion test was 22.67%. The working time and cutting speed of the chain saw machine were recorded and analyzed during the test-run at the quarry. The overall work cycle was assorted into 9 unit operations and the operating time per each unit was drawn. The operating times for the two cutting patterns, which could be possibly applicable to the work site, were compared. The results indicated that the pattern B, that the cutting sequence was set to minimize the movement of the machine, showed 6% less working hours than the pattern A, which first cuts the outer boundary. With cutting pattern analysis, the ore body in the Baekwoon mine was 3 dimensionally modeled and a quarrying plan considering the existing conditions of the marble was suggested.

• Korean Journal of Food Science and Technology
• /
• v.32 no.5
• /
• pp.1158-1167
• /
• 2000

To produce ${\beta}-cyclodextrin({\beta}-CD)$, a cyclodextrin glucanotransferase(CGTase) producing Aspergillus sp. CC-2-1 was isolated from soil. The enzyme was purified and its enzymological characteristics were investigated. It was found that production of CGTase reached to the maximum when the wheat bran medium containing 0.1% albumin, 2% $(NH_4)_2S_2O_8$, 2% soluble starch and 0.2% $KH_2PO_4$ was cultured for 5 days at $37^{\circ}C$. The purity of CGTase was increased by 13.14 folds after DEAE-cellulose ion exchange chromatography and Sephadex G-100, G-150 gel filtration and the specific activity was 172.14 unit/mg. Purified enzyme was confirmed as a single band by the polyacrylamide gel electrophoresis. The molecular weight of CGTase was estimated to be 27,800 by Sephadex G-100 gel filtration and SDS-polyacrylamide gel electrophoresis. The optimum pH and temperature for the CGTase activity were 9.0 and $80^{\circ}C$, respectively. The enzyme was stable in pH $8.0{\sim}11.0$ at $60{\sim}80^{\circ}C$. The activity of purified enzyme was activated by $K^+,\;Cu^{2+}$ and $Zn^{2+}$. The activity of the CGTase was inhibited by the treatment with 2,4-dinitrophenol and iodine. The result suggests that the purified enzyme has phenolic hydroxyl group of tyrosine, histidine imidazole group and terminal amino group at active site. The reaction of this enzyme followed typical Michaelis-Menten kinetics with the $K_m$ value of 18.182 g/L with the $V_{max}$ of 188.68 ${\mu}mole/min$. The activation energy for the CGTase was calculated by Arrhenius equation was 1.548 kcal/mol.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.431-439
• /
• 2016

Urban regeneration projects involve various stakeholders, which result in decision making processes that require long periods of time and cause many conflicts. This study aims to identify important factors in decision making for promoting an urban regeneration project. The analysis results utilizing AHP are as follows: Firstly, the analysis results identify the main considerations in the process of promoting urban regeneration projects as residents' opinion(0.393), involvement of local government(0.231), opinions of related experts(0.206) and master plan(0.169). Secondly, the key drivers of stakeholders' qualitative decision making were found to include sustainability(0.325), economic feasibility(0.277), ease of project implementation(0.232) and equity(0.166). Lastly, meaningful differences in the relative importance of key aspects of decision making were identified when respondents were grouped according to being aware or not aware of the urban regeneration project, as well as living on or living off the project site. The results of this study can be used to implement successful urban regeneration projects in the future.