• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.357-366
• /
• 2010

This paper presents experimental results about shear wall with various lateral reinforcement details in boundary elements. The research objective is to study the structural behavior of shear wall with boundary column confined by rectangular spiral hoops and headed cross ties developed to improve workability in the fabrication of boundary columns. These two details can be fabricated in a factory and put together on-site after being delivered so that the construction work may be reduced. Main parameters in the experimental study were the types of hoop and cross tie: rectangular spiral hoop and headed cross tie vs. standard hoop and cross tie with hook. Four half scaled shear wall specimens with babel shape were made and tested by applying horizontal cyclic load under constant axial force, 10% of nominal compressive strength of concrete. Based on the test result, it was shown that the shear wall with rectangular spiral hoop and headed cross tie in boundary columns has structural capacity compatible with conventional shear wall. The specimen SW-Hh which has bigger hoop bar and higher volumetric ratio of transverse reinforcements than other showed improved energy dissipating characteristic but it presented a rapid reduction of strength after peak point. The results indicates that, it is necessary to consider volumetric ratio of transverse reinforcements as well as hoop space in designing of shear wall with boundary columns for improved strength and ductility.

• Journal of the Korean Society of Food Culture
• /
• v.11 no.2
• /
• pp.243-253
• /
• 1996

The purpose of this study was to evaluate the foodservice management practices in child-care centers in order to provide basic information for the development of a model of a centralized food service information center. This approach was achieved using a variety of qualitative and quantitative information including general foodservice management practices and plate waste. A self-completed questionnaire survey of 651 child-care centers in Korea was undertaken and detailed information was carefully collected at 6 representative child-care centers. The results of the empirical survey were as follows: 1. Child-care centers categorized by location were in large cities (59.9%), medium cities (27.6%) and in provincial areas (12.5). 2. Private sector of child-care centers was 46.4% of the total followed by National/public (44.2%) and licensed home day-care programs (9.4%). 3. Total average number of children in child-care centers was $63.3{\pm}43.1$ with a very significant difference (p<0.001) in types of child-care centers. 4. The average space of kitchen and dining room was $5.0{\pm}3.8\;and\;10.8{\pm}11.0$ pyung ($1pyung=3.3058\;cm^2$). 5. The average cost of interim snack in morning and afternoon in child-care centers were $345.9{\pm}459.3$ won and $359.3{\pm}226.6$ won respectively. The average cost of lunch was $644.0{\pm}481.1$ won. There was a significant difference (p<0.001) by types of child-care centers with a highest cost of 863.9 won in licensed home day-care programs. 6. Only a limited number of dietitian were employed, therefore most of food service management practice was not conducted by professional personnel. 7. The result of nutritional analysis of the food revealed that the level of energy and nutrients contained in the food was below the recommeded level (RDA/3).

• Tunnel and Underground Space
• /
• v.26 no.2
• /
• pp.110-119
• /
• 2016

The purpose of this study is to evaluate the applicability of tailing in the ${\bigcirc}{\bigcirc}$ mine as a grout material. For the purpose, XRD analysis was performed for mineralogical properties of tailing. In addition, flow, velocity, and uniaxial compressive strength tests were carried out for physical and mechanical properties of a grout material with the mixing ratio of cement and tailing and curing periods. By the result of XRD analysis, tailing of the mine was found to mostly consist of quartz, galena, and pyrite. The flow observed by the flow test showed decreasing tendency with increasing the mixing ratio of tailing. The velocity was also lowered with increasing the mixing ratio of tailing regardless of curing periods. The uniaxial compressive strength as well as Young's modulus also show a tendency to decrease with increasing the mixing ratio of tailing independently on the curing periods. Considering only the physical and mechanical properties of a grout material with tailing, the results are considered to be sufficiently used as a grout material. However, since metallic minerals such as galena and pyrite in tailing contents and these are causing environmental contamination, countermeasures should be considered for this problem in future.

• Tunnel and Underground Space
• /
• v.26 no.2
• /
• pp.59-67
• /
• 2016

In this paper, we perform a numerical analysis to evaluate the potential of fault reactivation during gas production from hydrate bearing sediments and the moment magnitude of induced seismicity. For the numerical analysis, sequential coupling of TOUGH+Hydrate and FLAC3D was used and the change in effective stress and consequent geomechanical deformation including fault reactivation was simulated by assuming that Mohr-Coulomb shear resistance criterion is valid. From the test production simulation of 30 days, we showed that pore pressure reduction as well as effective stress change hardly induces the fault reactivation in the vicinity of a production well. We also investigated the influence of stress state conditions to a fault reactivation, and showed that normal fault stress regime, where vertical stress is relatively greater than horizontal, may have the largest potential for the reactivation. We tested one simulation that earthquake can be induced during gas production and calculated the moment magnitude of the seismicity. Our calculation presented that all the magnitudes from the calculation were negative values, which indicates that induced earthquakes can be grouped into micro-seismic and as small as hardly perceived by human beings. However, it should be noted that the current simulation was carried out using the highly simplified geometric model and assumptions such that the further simulations for a scheduled test production and commercial scale production considering complex geometric conditions may produce different results.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.4
• /
• pp.1-14
• /
• 2008

Although the Dreamland site was the only flat amusement park in the northern part of Seoul, the site lost its function as a regional park due to aging and, therefore, was no longer in use. The site is surrounded by currently existing high dense low-story housing blocks and proposed new towns. A renovation plan for Dreamland was raised by the City of Seoul to enhance the quality of the urban environment in the northern part of Seoul. This study articulates the design concepts and strategies of the prizewinning work of the International Design Competition for Gangbuk Large Park. The three key points can be summarized as follows: First, this design proposal tried to find a new possibility for a large mountain park in an urban areas. These days, mountain parks are used limitedly as ordinary living spaces for activities such as a walking, hiking, and physical training. New strategies were sought to reconstruct the sentiment with which our ancestors enjoyed the mountains. Second, this proposal tried to make Dreamland a socially self-sufficient park. We designed a park which generates self-energy and which communicates with the city, not a park which only exists as a green island in a city. Lastly, rain fed paddy fields, a typical Korean vernacular landscape, was a tangible space which represented people's life-styles harmonizing with the nature. Rain fed paddy fields is a design motif which puts the three surrounding mountains together with the site. It is expected that the new design will works as a noted place.

• Journal of Bio-Environment Control
• /
• v.6 no.3
• /
• pp.216-224
• /
• 1997

In the recent 10 years the protected cultivation area in Korea has been increased rapidly, and now it is very important issue to develop the heating and cooling system using the renewable energy, because the greenhouse heating and cooling cost is increased with the fossil fuel price rises. Actually the development of the cooling system is more difficult than that of the heating system, since the cooling load of greenhouse in the summer season is 2―3 times larger than the heating load in the winter season. In this study low temperature phase change materials (LTPCM) for the cold storage system were selected and developed. The theoretical and experimental analysis of thermal characteristics of LTPCM makes it possible to control the phase change temperature and stabilize the thermo-physical properties. LTPCM developed in this study has good advantages to be used as the cold storage not only for the house and working space in factory but also for the cold storage of agricultural and live-stock products.

• Geophysics and Geophysical Exploration
• /
• v.2 no.1
• /
• pp.17-25
• /
• 1999

A traveltime tomography has been carried out by transforming electromagnetic data in frequency domain to wave-like domain. The transform uniquely relates a field satisfying a diffusion equation to an integral of the corresponding wavefield. But direct transform of frequency domain magnetic fields to wave-field domain is ill-posed problem because the kernel of the integral transform is highly damped. In this study, instead of solving such an unstable problem, it is assumed that wave-fields in transformed domain can be approximated by sum of ray series. And for further simplicity, reflection and refraction energy compared to that of direct wave is weak enough to be neglected. Then first arrival can be approximated by calculating the traveltime of direct wave only. But these assumptions are valid when the conductivity contrast between background medium and the target anomalous body is low enough. So this approach can only be applied to the models with low conductivity contrast. To verify the algorithm, traveltime calculated by this approach was compared to that of direct transform method and exact traveltime, calculated analytically, for homogeneous whole space. The error in first arrival picked by this study was less than that of direct transformation method, especially when the number of frequency samples is less than 10, or when the data are noisy. Layered earth model with varying conductivity contrasts and inclined dyke model have been successfully imaged by applying nonlinear traveltime tomography in 30 iterations within three CPU minutes on a IBM Pentium Pro 200 MHz.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.6
• /
• pp.675-681
• /
• 1994

[ $F_0$ ]-values of the canned tuna in cottonseed oil (CTCO) were investigated under different sterilizing conditions to optimize the energy consumption and microbiological safety. The $F_0$-values were measured using a microcomputer based technique. The exact cold point was not the volumetric center of the cans, and it was located in the center of meat mass in can which had ca. $6\%$ of head space. Location of the test cans in retort showed no remarkable influence on the $F_0$-values when the cans were jumble loaded. The process time before sterilization should be shortened as much as possible to prevent the contamination of microorganisms. Thermophilic spore forming bacteria found from raw and precooked tuna were Bacillus subtilis, Bacillus cereus and Bacillus pasteurii, and the most heat resistant was Bacillus subtilis. The rational $F_0$-value for the CTCO obtained from the preservation test was regarded as 6min.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.981-986
• /
• 2020

The Internet of Things refers to a space-of-things connection network configured to allow things with built-in sensors and communication functions to interact with people and other things, regardless of the restriction of place or time.IoT is a network developed for the purpose of services for human convenience, but the scope of its use is expanding across industries such as power transmission, energy management, and factory automation. However, the communication protocol of IoT, MQTT, is a lightweight message transmission protocol based on the push technology and has a security vulnerability, and this suggests that there are risks such as personal information infringement or industrial information leakage. To solve this problem, we designed a synchronous MQTT security channel that creates a secure channel by using the characteristic that different chaotic dynamical systems are synchronized with arbitrary values in the lightweight message transmission MQTT protocol. The communication channel we designed is a method of transmitting information to the noise channel by using characteristics such as random number similarity of chaotic signals, sensitivity to initial value, and reproducibility of signals. The encryption method synchronized with the proposed key value is a method optimized for the lightweight message transmission protocol, and if applied to the MQTT of IoT, it is believed to be effective in creating a secure channel.

• The KIPS Transactions:PartC
• /
• v.17C no.6
• /
• pp.441-450
• /
• 2010

Recently, a lot of interest is increased in sensor network which gathers various data through many sensor nodes deployed in wired and wireless network environment. However, because of the limitation in memory, computation, and energy of the sensor nodes, security problem is very important issue. In sensor network, not only the security problem, but also computing power should be seriously considered. In this paper, considering these characteristics, we make the sensor network consist of normal sensor nodes and clusterheaders with enough space and computing power, and propose a group key rekeying scheme adopting PCGR(Predistribution and local Collaborationbased Group Rekeying) for secure group communication. In our proposal, we enhance the security by minimizing the risk to safety of the entire network through verifying the new key value from clusterheader by sensor nodes. That is, to update the group keys, clusterheaders confirm sensor nodes through verifying the information from sensor nodes and send the new group keys back to authentic member nodes. The group keys sent back by the clusterheaders are verified again by sensor nodes. Through this mutual authentication, we can check if clusterheaders are compromised or not. Qualnet simulation result shows that our scheme not only guarantees secure group key rekeying but also decreasesstorage and communication overhead.