• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.119-126
• /
• 2008

In this paper, the loop coupling model for the analysis of end launcher rectangular waveguide adapter are proposed. The formula of input impedance from this model are presented. The influence of propagation mode and higher modes in rectangular waveguide are analyzed and design parameters of the end launcher adapter are investigated. The computational results between the proposed theoretical analysis and the previous papers are compared and are verified by HFSS. The end launcher rectangular waveguide adapter consists of the coupling geometry which is connected the inner conductor of $50{\Omega}$ coaxial line through into the 17.6mm feeding loop in a WR90 commercial waveguide, and the VSWR is maximum 2.0 over operating frequency from 7.5GHz to 10.6GHz.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.3
• /
• pp.316-325
• /
• 2015

This paper describes the design guide and its assessment process to be applied to the launcher vehicle exterior design. A launcher vehicle design is required to meet three kinds of design attributes; symbolic quality, usability, and aesthetic quality. The launcher vehicles referred to in this paper are assessed by the elements in the guidelines. A set of assessment process and methods is derived to evaluate how well the three design attributes are applied in the actual launch vehicle design. An example of assessment is shown at the last part of this paper. By this way designers can take various criteria into account integratively and select the final design. High design satisfaction and pride of the operators and the nation can be assured in the end.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.2
• /
• pp.102-110
• /
• 2017

In this paper, the liquid oxygen filling system (LOXFS) of the launch complex system of Korea Space Launch Vehicle-II (KSLV-II) is introduced based on critical design result by KARI in 2015 to 2016. The function and specification of the main systems of the liquid oxygen filling system, such as the storage tank, the drainage tank, the supply pumping system, the curved heat exchanger with liquid nitrogen, end valve block system, and umbilical connection, are presented.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.11
• /
• pp.1077-1085
• /
• 2011

Various stakeholder's expectations and constraints are to be efficiently resolved into a program consensus prior to the beginning of its substantial design processes. This study focuses on the analysis of the stakeholder's expectations in determining the design requirements at the initial stage of space exploration programs including Naro launcher and currently on-going KSLV-II program. Naro program seems to unilaterally account for the government expectations of accelerating program phase speed without making any efforts to converge various expectations from related sectors. The planning of Naro launcher is also found lack of the concept of operations (ConOps), which is of critical importance by envisaging the operational applications of end products. Similarities are found in KSLV-II program regarding the lack of implementation for stakeholder's expectations. Moreover, the government plan for KSLV-II disclosed without considering all expectations and other comments. The increase in design conflicts and program uncertainties would be unavoidable, if the government plan for KSLV-II would be insisted. It is required to modify the government plan and to establish the ConOps with the convergence of stakeholder's expectations at this early stage of the program.

• Journal of Advanced Navigation Technology
• /
• v.25 no.4
• /
• pp.267-272
• /
• 2021

The end of the ROK-U.S. missile guidelines opened up the possibility of developing space launch vehicles for various platforms based on air and sea. In particular, the air-based space launch vehicle is an essential space power projection capability compared to the ground-based space launch vehicle in consideration of the geographical location of the Korean Peninsula, such as the deployment of various satellite orbits and the timely launch of satellite. In addition, compared to the ground-based launch vehicle, the cost reduction effect is large, and it has the merit of energy gain because it can be launched with the advantage of the aircraft's altitude and speed. Therefore, in this paper, the necessity of air-based space launch vehicle in the strategic environment of the Korean Peninsula is clearly presented, and through technology trend analysis of various air launch vehicle, the three methods are proposed to have the most efficient air-based space launch vehicle capability in the Korean situation.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.2
• /
• pp.110-118
• /
• 2021

In a liquid rocket engine system, the flow of oxidizer into the combustion chamber is controlled by the main oxidizer shut-off valve. When the valve is closed, the oxidizer flows via the recirculation line, not into the combustion chamber. In this situation, the measured pressure could be much higher than a design value because of the water hammer phenomenon. In this paper, the experiments on the water hammer in the recirculation line with different initial conditions were conducted in order to study the pressure wave produced in each case. According to the experimental results, characteristics of the pressure wave in the recirculation line depend on the initial condition. To be specific, the pressure surge is maximized in case that the shock is condensation-oriented in the end of the recirculation line.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.4
• /
• pp.55-65
• /
• 2020

In this paper, development and acceptance test results of 75-tonf class liquid rocket engine gas generators are described. Up to now, more than 330 times and cumulative time of 7,000 seconds gas generator autonomous tests have been carried out with 44 gas generator models. Through the tests it was verified that 75 tonf gas generator shows very reliable and reproducible characteristics in terms of chamber pressure, combustion efficiency, pressure loss, combustion stability, burnt gas temperature, and etc. 5 gas generators which are the last series of 75 tonf gas generator for the Korea Space Launch Vehicle II, will be manufactured until end of 2019 and their acceptance tests will be executed at the first half of 2020.