• Journal of Pharmaceutical Investigation
• /
• 제32권1호
• /
• pp.41-45
• /
• 2002

The purpose of this study is to microencapsulate a highly hygroscopic drug, pyridostigmine bromide (PB), with a waterproof wall material, in order to increase the flowability of the drug particles. Polyvinylacetaldiethylaminoacetate (AEA), Eugragit E and Eugragit RS were examined as the wall materials. Microcapsules containing PB were prepared by the evaporation technique in an acetone/liquid paraffin system using aluminum tristearate as a core material, and evaluated for drug encapsulation efficiency, surface morphology, particle size and drug dissolution. The encapsulation of PB in the wall material was almost complete. Among the wall materials examined, AEA exhibited the most excellency in shape, surface texture, flowability, size distribution of microcapsules. Above results suggest that AEA would be a potential wall material for microcapsulation of highly hygroscopic drugs, such as PB. Through microencapsulation with AEA, inconvenience of handling of PB powders encountered in the process of weighing and packing the powders to tableting die or capsule body could be greatly improved.

• 한국자원식물학회지
• /
• 제30권6호
• /
• pp.612-617
• /
• 2017

The preservation of pear germplasm, like that of other clonal germplasms, is difficult because it requires conservation of whole plants or their tissues. Among the currently available methods for long-term conservation of clonal germplasm, cryopreservation of shoot tips is the most reliable and cost- and space-effective option. Alginate-coated axillary shoot tips from in vitro-grown pear were conserved successfully in liquid nitrogen (LN) following dehydration. Shoot recovery from cryopreserved shoot tips was improved greatly after 8 weeks of cold acclimation, but recovery decreased slightly after then. The highest regeneration rate was observed when in vitro shoot tips were preincubated in MS (Murashige and Skoog) medium with 0.3 M sucrose for 48 h, and when alginate-coated shoot tips were precultured in MS medium with increasing sucrose concentrations (0.5 M and 0.7 M) for 8 and 16 h, respectively. When the encapsulated beads were dehydrated for up to 7 h [25% water content (fresh weight basis)] under laminar flow, the highest regeneration rate was observed in "BaeYun No. 3" (55.7%) and "Whanggeum" (43.3%) after warming from LN. This technique is useful as a practical procedure to cryopreserve plant material that is sensitive to freezing of the surrounding cryoprotectant medium. Therefore, this technique appears to be promising for the cryopreservation of shoot tips from in vitro-grown plantlets of pear germplasm.

• 폴리머
• /
• 제31권3호
• /
• pp.215-220
• /
• 2007

전기분무에서의 전기유체 역학적 힘에 의한 표면 에너지의 조절은 간단한 입자 크기 조절, 단분산성, 높은 회수율, 그리고 약한 가공조건과 같은 이점을 제공할 수 있다. 이러한 이점은 단백질 약물전달체 제조에 적절할 것으로 예상되어, 본 연구에서 전기분무법을 이용하여 단백질 약물의 나노포집을 시도하였다. 모델 단백질인 알부민을 단축 혹은 동축 전기분무로 가공하였고 키토산, 폴리카플로락톤(PCL), 폴리 (에틸렌 글리콜) (PEG) 등이 포집물질로 사용되었다. 효율을 최대로 높이기 위해 분무액의 전기전도도, 유속, 전기포텐셜 구배의 거리 등과 같은 가공변수들이 조사되었다. 키토산 시스템에서 입자크기에 대한 공정 변수의 영향은 유속이 늦어질수록, 노즐과 집적부 사이의 거리가 가까울수록 입자 크기가 감소하는 것을 알 수 있었다. PCL 시스템에서는 단축 전기분무의 경우 유속이 늦어질수록, 동축 전기분무의 경우 내부와 외부 물질의 유속비가 클수록 입자 크기가 증가하는 것을 확인할 수 있었다. 전기분무 노즐에서 생성된 초기 입자들은 좁은 입자 크기 분포를 보였으나, 그것들이 집적부에 도달했을 때 입자들이 응집되는 경향이 있었다. 이러한 전기분무법에서 PCL, PEG, 키토산을 사용한 알부민의 효과적인 나노 포집은 12 kV 이상에서 성공적으로 이루어졌다.

• 한국식품과학회지
• /
• 제41권1호
• /
• pp.27-31
• /
• 2009

식품의 원료인 참기름을 캡슐화하기 위해 전보(11)에서 최적화한 model system을 기초로 피복물질을 선정하고 이에 3%의 gellan gum을 첨가한 후 유화압력을 20.7 MPa로 하여 유화액을 제조하였다. 이를 top spray dryer와 fluidized bed granulator에 의한 공정으로 캡슐을 제조하여 캡슐화 수율, surface oil, 수분함량, 입자 크기, 캡슐의 저장 안정성 및 제품 응용성을 비교하였다. Fluidized bed granulator에 의한 캡슐은 top spray dryer에 의한 캡슐보다 상대적으로 surface oil 함량이 낮고 수율이 높으며 입자 크기가 컸다. 제조한 캡슐을 $37^{\circ}C$에서 저장하면서 flavor retention을 측정한 결과 참기름 원료 자체를 저장한 경우 향기 성분은 1% 이하의 잔존 함량을 나타내어 대부분의 향기 성분이 소실되었다고 보았으나, top spray dryer와 fluidized bed granulator에 의한 캡슐은 각각 37%, 42%의 향기성분을 보유하여 향기 성분 포집성 및 보존성이 우수하였다. 또한 쇠고기 죽 제품에 응용한 후 관능검사 결과에서도 참기름 캡슐을 사용한 제품들이 모두 참기름 원료 자체를 사용한 제품보다 풍미의 강도 및 기호도면에서 모두 높았고 특히 fluidized bed granulator를 이용하여 제조한 캡슐을 사용한 제품이 가장 우수하게 평가되었다. 따라서 참기름 원료와 같이 향기 성분이 소실 되기 쉬운 소재를 fluidized bed granulator를 이용하여 저온 미세 캡슐화하면 풍미의 안정성 증대에 효과가 있을 것으로 판단된다.

• 한국유가공학회:학술대회논문집
• /
• 한국유가공기술과학회 2004년도 제59회 추계유가공심포지움 - 유가공 산업의 신기술 동향 및 발전 방향
• /
• pp.17-29
• /
• 2004

Nanofood can be simply defined as natural polymer particles containing functional food materials in nanoscale that are synthesized by polymerization or emulisification process. They have very uniform diameters in the range of 1 to 100 nm and extensive surface areas due to the small particle size in spite of their non-porosity. Although the technique to produce nanofood has not Bong developing history, many works have been achieved in various fields. Nanofood has a lot of special advantages, such as functionality, diversity, applicability, etc. In case of the domestic food industries, however, the accumulation of related technique is insufficient against developed countries except used food materials. Also, it is difficult to acquire technical know-how from the developed countries that possess those technologies. We have been studied on preparing functional nanofood and developing new production processes since 1999. Last 5 years we have laid the foundation on the preparation of nanofood and now are focusing on developing new processes of nanofood and expending the field of its applications.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3208-3212
• /
• 2012

Controlled drug delivery systems employing microparticles offer lots of advantages over conventional drug dosage formulations. Microencapsulation technique have been conducted with biodegradable polymers such as poly(lactic-co-glycolic acid) (PLGA) and poly(lactic acid) (PLA) for its adjustable biodegradability and biocompatibility. In this study, we evaluated two techniques, oil-in-water (o/w) emulsion solvent evaporation and spray drying, for preparation of polymeric microparticles encapsulating a newly synthesized drug, SS-AG20, for the long-term drug delivery of this low-molecular-weight drug with a very short half-life. Drug-loaded microparticles prepared by the solvent evaporation method showed a smoother morphology; however, relatively poor encapsulation efficiency and drastic initial burst were discovered as drawbacks. Spray-dried drug-loaded microparticles had an imperfect surface with pores and distorted portions so that its initial burst was critical (70.05-87.16%) when the preparation was carried out with a 5% polymeric solution. By increasing the concentration of the polymer, the morphology was refined and undesirable initial burst was circumvented (burst was reduced to 35.93-74.85%) while retaining high encapsulation efficiency. Moreover, by encapsulating the drug with various biodegradable polymers using the spray drying method, gradual and sustained drug release, for up to 2 weeks, was achieved.

• 한국농공학회논문집
• /
• 제54권2호
• /
• pp.115-125
• /
• 2012

Application of the Object-oriented Programming (OOP) method to the Finite Element Model (FEM) program has various strengths including the features of encapsulation, polymorphism and inheritance. However, this technique should be based upon a premise that the independency of the object method and data to be used is guaranteed. By attempting to apply the OOP to the FEM, existing researches go against the independency of the OOP which is an essential feature of the method. The reason is this: existing researches apply the OOP to modules in accordance with analysis procedures, although the data to be used is classified as an element unit in the FEM. Therefore, the required independency cannot be maintained as whole stiffness matrices and boundary conditions are combined together. Also, solutions are sought from analysis module after data is regrouped at the pre-processor, and their results are analyzed during the post-processor. As this is similar to a batch processing, it cannot use data at analysis, and recalculation should be done from the beginning if any condition is changed after the analysis is complete, which are limitations of the existing researches. This research implemented the Object-orientation of elements so that the three features of the OOP (i.e. encapsulation, polymorphism and inheritance) can be guaranteed and their independency maintained as a result. For this purpose, a model called 'Object-oriented Finite element Model ensuring the Independency of Elements (OFMIE)', which enables the analysis of targets through mutual data exchanges within instance, was developed. In conclusion, the required independency was achieved in the instance of the objected elements and the analysis results of previous conditions could be used for the analysis after changes. The number of repetitive calculations was reduced by 75 per cent through this gradual analysis processes.

• KSBB Journal
• /
• 제19권3호
• /
• pp.178-186
• /
• 2004

복합한방 재료인 옥용산에 대해 UV 흡수능, tyrosinase 저해활성 그리고 free radical 소거활성을 측정함으로서 미백활성을 검정하고 비교 시험군으로서 비타민C와 함께 Eudragit 이 코팅된 coconut oil을 이용한 SLN을 제조할 수 있었다. 실험 결과, 옥용산은 UV 영역에서 흡수능을 가지며 tyrosinase 저해 활성과 free radical 소거활성을 가진 것으로 확인되었다. 제조된 E-SLN을 TEM을 이용하여 관찰한 결과 크기 50∼300 nm인 구형의 양호한 입자를 형성하고 있음을 확인하였다. 또한 그 크기분포와 캡슐화 효율 분석을 통해 EUD의 농도가 2.0% (w/v), w/o 비율은 1 ： 9, emulsion과 pour solution의 비율은 1 : 10, 그리고 실온에서 제조한 E-SLN의 캡슐화 효율이 가장 높고 크기의 분포가 가장 양호한 것을 알 수 있었다. E-SLN을 이용하여 in vitro 방출시험을 실시한 결과 E-SLN은 pH와 온도 의존적으로 약물을 방출하는 경향을 나타냈다. 결과적으로 제조된 E-SLN은 pH와 온도 의존적으로 약물을 전달할 필요가 있는 계에 대한 약물전달 시스템으로 적합할 것으로 보인다. 폐쇄 첩포시험과 자외선 조사에 의한 인공색소침착과 시료도포에 의한 미백효능 판정에 의한 임상시험 결과 옥용산과 비타민C, 그리고 이를 포함하는 E-SLN은 대조군의 경우와 비교하여 미백효과를 가지는 것으로 확인되었으며 이는 기능성화장품에의 응용 가능성을 높여주었다.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.129-137
• /
• 2015

The study of photocatalysis of nano titanium dioxideon the cotton fabrics have been investigatedthrough self-cleaning properties. The mini-emulsion technique was employed to prepare the encapsulation of titanium dioxide nano particles in polystyrene beads prior used. The mini-emulsion was coated on the cotton fabrics using Pad-dry method.The loading amount of TiO2particles into the mini-emulsion were various from 1%wt to 40%wt. The particles sizes of the TiO2-encapsulated polystyrene mini-emulsion were investigated by dynamic light scattering. It was noticed that the particle size of the mini-emulsion was in the range of 100- 200 nm. The morphology of treated cotton fabrics were investigated using scanning electron microscopy. The crystal structure of TiO2-encapsulated PS mini emulsion which coated on cotton fabrics were examined by X-ray diffraction spectroscopy. In order to investigate the photocatalytic activities of TiO2 through the selfcleaning characteristics of the cotton fabrics, colorant stains were created on the samples. Coffee stains were used as colorant organic stains. The result shown that the coffee stained on the cotton fabrics significantly showed the improving of the self-cleaning properties under UV radiation.

• Bulletin of the Korean Chemical Society
• /
• 제27권1호
• /
• pp.65-70
• /
• 2006

An amperometric glucose biosensor has been developed based on the use of the nanoporous composite film of sol-gel-derived zirconia and perfluorosulfonated ionomer, Nafion, for the encapsulation of glucose oxidase (GOx) on a platinized glassy carbon electrode. Zirconium isopropoxide (ZrOPr) was used as a sol-gel precursor for the preparation of zirconia/Nafion composite film and the performance of the resulting glucose biosensor was tuned by controlling the water content in the acid-catalyzed hydrolysis of sol-gel stock solution. The presence of Nafion polymer in the sol-gel-derived zirconia in the biosensor resulted in faster response time and higher sensitivity compared to those obtained at the pure zirconia- and pure Nafion-based biosensors. Because of the nanoporous nature of the composite film, the glucose biosensor based on the zirconia/Nafion composite film can reach 95% of steady-state current less than 5 s. In addition, the biosensor responds to glucose linearly in the range of 0.03-15.08 mM with a sensitivity of 3.40 $\mu$A/mM and the detection limit of 0.037 mM (S/N = 3). Moreover, the biosensor exhibited good sensor-to-sensor reproducibility (~5%) and long-term stability (90% of its original activity retained after 4 weeks) when stored in 50 mM phosphate buffer at pH 7 at 4 ${^{\circ}C}$.