• 제목/요약/키워드: emulsion method

검색결과 422건 처리시간 0.022초

D상 유화물을 이용한 W/O 유화물의 제조와 특성 (Preparation and Properties of W/O Emulsion by D Phase Emulsification)

  • 김형진;정노희;윤영균;박관선;남기대
    • 한국응용과학기술학회지
    • /
    • 제15권2호
    • /
    • pp.25-32
    • /
    • 1998
  • The emulsion stability of W/O emulsion prepared by D phase emulsification during storage and handling is studied by using phase diagrams. The process of D phase emulsification begins with the formation of isotropic surfactant solution, followed by formation of oil-in-surfactant (O/D) gel emulsion by dispersion of octamethylcyclotetrasiloxane(OMCS) in the surfactant solution. Polyols were essential components for this purpose. To understand the function of polyols, the solution behavior of nonionic surfactant/oil/water/polyol systems were investigated by the ternary phase diagrams of polyoxyethylene oleyl ether/OMCS/propylene glycol(PG) aqueous solutions. The addition of PG increased the solubility of oil in the isotropic surfactant phase. D phase emulsification method has been applied to a new type of cosmetics. By using this emulsification technique, O/W emulsion were formed without a need for adjust of HLB. Fine and stable W/O emulsions were prepared by D phase emulsion.

Induction of Immunity Against Hepatitis B Virus Surface Antigen by Intranasal DNA Vaccination Using a Cationic Emulsion as a Mucosal Gene Carrier

  • Kim, Tae Woo;Chung, Hesson;Kwon, Ick Chan;Sung, Ha Chin;Kang, Tae Heung;Han, Hee Dong;Jeong, Seo Young
    • Molecules and Cells
    • /
    • 제22권2호
    • /
    • pp.175-181
    • /
    • 2006
  • Delivery of DNA vaccines to airway mucosa would be an ideal method for mucosal immunization. However, there have been few reports of a suitable gene delivery system. In this study we used a cationic emulsion to immunize mice via the intranasal route with pCMV-S coding for Hepatitis B virus surface antigen (HBsAg). Complexing pCMV-S with a cationic emulsion dramatically enhanced HBsAg expression in both nasal tissue and lung, and was associated with increases in the levels of HBs-specific Abs in serum and mucosal fluids, of cytotoxic T lymphocytes (CTL) in the spleen and cervical and iliac lymph nodes, and of delayed-type hypersensitivity (DTH) against HBsAg. In contrast, very weak humoral and cellular immunities were observed following immunization with naked DNA. In support of these observations, a higher proliferative response of spleenocytes was detected in the group immunized with the emulsion/pCMV-S complex than in the group immunized with naked pCMV-S. These findings may facilitate development of an emulsion-mediated gene vaccination technique for use against intracellular pathogens that invade mucosal surfaces.

THE STUDY ON STABLE EMULSION SYSTEM AND SELECTIVE ADDITION OF ACTIVE INGREDIENT IN W/O/W ONE STEP MULTIPLE EMULSION

  • Kim, Se-gie;Park, Hee-nam;Kim, Tae-kyoo
    • 대한화장품학회지
    • /
    • 제24권3호
    • /
    • pp.96-104
    • /
    • 1998
  • It was possible to produce W/O/W one step multiple emulsion on the system which satisfied following conditions. 1. 1-5% of hydrophilic liquid surfactant over HLB20 and lipophilic liquid surfactant which has HLB 3∼5 2. Non wax copolymers as oil thickener 3. More than 0.5% of carbomer as aqueous thickener 4. The manufacturing process which neutralize the dispersed carbomer (2.0% in water), after emulsifying. For the selective addition into inner and outer aqueous phase, we melted the glucose in water before emulsifying. Using an Anthrone analysis method, we analyzed the encapsulation yield of glucose in inner water phase. It was possible to raise the water encapsulation yield of the multiple emulsion through the following conditions. 1. Using of anionic hydrophilic surfactant(HLB 40) and lipophilic surfactant (HLB 3∼5) 2. Controlling the ratio of hydrophilic surfactant and lipophilic surfactant 3. Strengthening interface with increase of non wax oil thickener. When the separated adding process of glucose was adopted, approximately 85% of glucose was added selectively within inner aqueous phase.

  • PDF

점착부여제 투입 방법에 따른 아크릴 에멀젼의 점착 특성 연구 (Study on Adhesion Characteristics for Acryl Emulsion with Adjunction Method of Tackifier)

  • 정부영;천제환;천정미;박기호
    • 접착 및 계면
    • /
    • 제13권2호
    • /
    • pp.89-93
    • /
    • 2012
  • 본 연구에서는 아크릴 점착제 합성시 점착부여제의 투입방법에 따른 물성 변화를 알아보았다. 아크릴 에멀젼 합성시, 점착부여제의 함량이 증가함에 따라 유리전이온도($T_g$)는 증가하는 경향을 나타내었으며, 초기 접착력은 고상 점착부여수지의 경우 10 phr, 점착부여 에멀젼의 경우 15 phr에서 최대값을 나타내었다. 또한 내열 접착력 및 내수 접착력의 경우 점착부여 수지의 함량이 증가함에 따라 증가하는 경향을 나타내었다.

Stabilization of Ascorbic Acid using Anhydrous Multiple Emulsion

  • Jeon, Jong-Taek;Kim, Yoon-Suk;Ko, Min-Su;Kim, Jong-Geun;Kim, Ik-Soo
    • 대한화장품학회:학술대회논문집
    • /
    • 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
    • /
    • pp.313-318
    • /
    • 2003
  • Vitamin C's function and mechanism are comparatively well known among the several kinds of vitamins. Inhibition of free radical. promotion of collagen synthesis, restraint of melanin formation and resolution of melanin are its main functions. But Vitamin C is very easy to oxidize by heat, moisture or air so it causes stability problem to make formulation. To solve these problems unique formulating method or derivatives using method could be effective. Object: First, stabilize 10% of Ascorbic acid as polyol/silicone emulsion and try to make polyol/silicone/polyol anhydrous multiple emulsion secondly. And then, encapsulate with porous power to enhance the stability of Ascorbic Acid from formulating method.

  • PDF

고에너지유화법을 이용하여 제조한 나노에멀젼에 대한 에탄올의 영향 (The Effects of Ethanol on Nano-emulsion Prepared by High-energy Emulsification Method)

  • 원보령;박수남
    • 대한화장품학회지
    • /
    • 제35권3호
    • /
    • pp.179-191
    • /
    • 2009
  • 본 연구에서는 poly(oxyethylene) hydrogenated castor oils (HCOs)/오일/에탄올/물로 이루어진 에멀젼에 대한 에탄올의 영향을 연구하였다. 에멀젼은 고에너지법인 균질기(homogenizer)를 병합하여 제조하였다. 에멀젼에 대한 에탄올의 영향을 평가하기 위해 입자 크기와 입자 분포 등의 물리적 특성을 측정하였으며 다른 성분의 조성은 같도록 하였다. HCO-20의 경우 에멀젼의 크기가 마이크로미터 크기에서 에탄올이 증가할수록 입자의 크기가 감소하는 것을 확인하였다. HCO-30의 경우 계면활성제 농도 4.00 %에서 입자 크기가 나노미터 크기로 나타났으며, 에탄올의 농도가 4.25 % 일 때 조성 1에서 입자 크기가 $128.15{\pm}1.06nm$이고 조성 2에서는 $136.10{\pm}0.99nm$로 가장 안정한 나노에멀젼이 생성되었다. 마찬가지로 HCO-40은 계면활성제 농도 4.00 %에서 입자가 나노미터 크기로 나타났으며, 에탄올이 4.50%일 때 조성 1에서 입자 크기가 $115.85{\pm}0.78nm$이고 조성 2는 $121.15{\pm}0.35nm$로 안정한 나노에멀젼이 생성되었다. HCO-60의 경우에서는 계면활성제 농도 4.00 %, 에탄올 농도 2.25 %에서 에멀젼의 크기가 $262.35{\pm}0.64nm$인 안정한 나노에멀젼이 생성되었다. 마이크로 크기의 에멀젼에서는 에탄올의 함량이 증가할수록 입자의 크기가 감소하는 것을 알 수 있었고, 나노에멀젼에서는 에탄올의 특정 농도에서 최저값을 나타냄을 확인하였다. 나노에멀젼의 불안정화 과정은 Ostwald ripening에 의한 것으로 보여진다. 계면활성제 종류에 따른 에멀젼에 대한 에탄올의 영향을 연구함으로써 안정한 에멀젼을 만들기 위한 에탄올의 함량을 계산할 수 있을 것으로 사료된다.

두부응고제로서 Homomixer 회전속도를 달리한 염화마그네슘유화물의 제조특성 (The Manufacturing Characteristics of Magnesium Chloride Emulsion by Different Rotational Speed of Homomixer as Soybean Curd Coagulant)

  • 홍승석;박원종;정경희
    • 한국산학기술학회논문지
    • /
    • 제14권3호
    • /
    • pp.1252-1257
    • /
    • 2013
  • 본 연구는 Homomixer의 회전속도에 따른 염화마그네슘 유화물의 제조특성을 비교하여 두부응고제로서 염화마그네슘유화물의 제조상 최적조건을 확립하기로 하였다. 염화마그네슘유화물의 입자는 Homomixer의 회전속도가 증가할수록 미세화 되었다. 입자크기는 $1{\sim}5{\mu}m$로 분포하고 있었다. 분산상의 입자크기가 미세화 할수록 점도의 증가와 보관 중 유상분리의 지연으로 상관관계가 있음을 나타내었다. 따라서 염화마그네슘유화물을 제조하는데 있어서 Homomixer의 회전속도는 10,000rpm 이상에서 제조하는 것이 두부응고제로서 두부의 조직 상태와 이수율 등이 가장 좋은 결과를 나타내었다.

피부 흡수 증진을 위한 마디풀 추출물 함유 나노에멀젼 제조에 관한 연구 (Preparation of Nano-emulsion Containing Polygonum aviculare Extract for Enhanced Transdermal Delivery)

  • 임명선;박민아;박수남
    • 공업화학
    • /
    • 제23권2호
    • /
    • pp.222-227
    • /
    • 2012
  • 본 연구에서는 마디풀 추출물의 에틸아세테이트 분획을 함유한 안정한 나노에멀젼을 제조하였고, 이 나노에멀젼의 피부 흡수 증진 효과를 평가하였다. 나노에멀젼은 균질기(homogenizer) 처리 후 고압유화기(microfluidizer)를 이용한 고에너지법으로 제조하였다. 마디풀 추출물의 에틸아세테이트 분획을 함유한 나노에멀젼의 입자 크기와 포집효율을 측정하였다. 평균 입자 크기는 238 nm이었으며 포집 효율은 98% 이상으로 나타났다. 나노에멀젼은 단분산의 입도 분포를 나타냈으며 고압 유화 과정을 거치지 않은 일반 에멀젼보다도 더 안정함을 보여주었다. Franz diffusion cell을 이용하여 마디풀 추출물의 에틸아세테이트 분획을 함유한 나노에멀젼의 피부 투과 실험을 수행하였다. 에틸아세테이트 분획 함유 나노에멀젼은 대조군인 1,3-butylene glycol 용액에서 보다 피부 흡수 및 투과량이 더 큰 것으로 나타났다. 이상의 연구 결과들은 항산화 및 항노화 활성이 큰 마디풀 추출물의 에틸아세테이트 분획을 함유한 나노에멀젼이 안정성 및 피부 투과력이 우수함을 시사한다.

Poly(oxypropylene-oxyethylene glycol) Block Copolymer계 유분산제의 제조와 Weathering Crude Oil에 대한 W/O 에멀젼 특성 (Preparation of Poly(oxypropylene-oxyethylene glycol) Block Copolymers Oil Dispersant and Characteristics of W/O Emulsion to Weathering Crude Oils)

  • 강두환
    • 한국응용과학기술학회지
    • /
    • 제20권3호
    • /
    • pp.204-211
    • /
    • 2003
  • Poly(oxypropylene-oxyethylene glycol) block copolymer(PBC) oil dispersant, which has low toxicity, high biodegradability, and an excellent dispersion efficiency to crude oils and weathered W/O emulsion was prepared by blending PBC, poly(oxyethylene) oleate, and sorbitan monooleate. The dispersing efficiency was measured by swirling flask method. The PBC oil dispersant had an excellent dispersing efficiency to weathered oil products formed as stable W/O emulsion, and the low toxicity, such as 4000 ppm to Oryzias Latipes(24 hr, TLM), Brine Shrimp Artemia(24 hr, TLM).

MgO-$Al_2O_3$-$SiO_2$계 요업원료의 제조 및 소결특성 -에멜젼법에 의한 Spinel 분체의 저온합성- (Low-Temperature Synthesis of Spinel Powders by the Emulsion Technique)

  • 현상훈;이희수;김의수
    • 한국세라믹학회지
    • /
    • 제27권5호
    • /
    • pp.661-667
    • /
    • 1990
  • Spinel powders were synthesized at the comparatively low-temperature range(800~90$0^{\circ}C$) by the emulsion-hot kerosene drying method and the effects of kerosene-evaporative conditions on powder characteristics were investigated. In emulsion drying, more unagglomerated and sinterable powders could be synthesized through rapid evaporation of emulsion at the higher kerosene temperature. The completion of formation reaction of spinel observed at the low-temperature range confirmed the high reactivity of powders. The relative theoretical density and the fracture toughness of spinel pellets sintered at 1$650^{\circ}C$ for 4hrs. were 98% and 2.1MN/m3/2, respectively.

  • PDF