• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.632-635
• /
• 2003

As a process technology of nano pattern with a new conception for economic and practical technology of alternative nano process. process technologies such as Embossing, Imprinting. Molding and Inking are beginning to make its appearance. Among these alternative processes, nano mold process is a process that is of benefit to mass production and keeps excellency of reproduction and high quality of parts. In this study, we experienced micro precision machining technology of nano stamper for the injection mold of optical disk with big capacity. Especially, Flatness and uniformity are important for nano stamper with global area, for the purpose of developing polishing technology of micro precision of Back polishing only being used for nano stamper, we carried out a basic study to secure flatness standards

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.196-198
• /
• 2003

Classical lithography in semiconductor employs stepper technologies. Limits of this technology are clearly seen at structures below 100nm. Nano-imprinting lithography is a new method for generating patterns in submicron range at reasonable cost. In order to manufacture nano-imprinting lithography(NIL) equipment, several NIL manufacturers have been developing key technologies for realization of nano-imprinting process, recently. In this paper, we've been describe state-of-the-art and technology trends for nano-imprinting lithography equipments.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.07a
• /
• pp.207-208
• /
• 2007

• Design & Manufacturing
• /
• v.10 no.3
• /
• pp.46-50
• /
• 2016

Laminate products for motor core are developed with a structure in which the importance of quality level and clamping force is influenced by the recent performance and safety of the product. It has been confirmed that the accuracy of the mold is emphasized, and that the accuracy of the tightening force produced by the stacked product for the motor core is greatly influenced by the change in the bottom dead center displacement of the aged high speed press. The reason why setting the mold, and test the effect of bottom dead center of high speed press is to improve product pull force in embossing process at mold. We have applied the system to minimize the effect on the damping displacement under the dynamical degree of the equipment by applying the emboss complement device which can test the influence and complement in the process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.410.1-410.1
• /
• 2014

A soft-lithographic top-down approach is combined with an epitaxial layer transfer process to fabricate high quality III-V compound semiconductor nanowires (NWs) and integrate them on Si/SiO2 substrates, using MBE-grown ultrathin InAs as a source wafer. The channel width of the InAs nanowires is controlled by using solvent-assisted nanoscale embossing (SANE), descumming, and etching processes. By optimizing these processes, the NW width is scaled to less than 50 nm, and the InAs NWFETs has ${\sim}1,600cm^2/Vs$ peak electron mobility, which indicates no mobility degradation due to the size.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.11a
• /
• pp.193-199
• /
• 2006

Fruit bagging paper is used for protecting of fruits from insect and/or microorganisms. Generally, fruit bagging paper controled light, temperature and humidity and then it is used for good fruit color, size and taste. The physical properties of conventional(domestic and abroad) fruiting bag and wrapping paper were analyzed and compared to each other. And also, the optical properties of conventional(domestic and abroad) fruiting bag and wrapping paper were analyzed and compared to each other. The chemical additives and residual herbicide in conventional fruiting bag and wrapping paper were analyzed and compared to each other. The analyzed data was bench marked for developing water repelling paper and embossing paper.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.1
• /
• pp.79-84
• /
• 2004

A light-guide is one of several important components of backlight unit in TFT-LCD. The manufacturing technology and optical system design of the light guide is very sensitive to quality and cost of the TFT-LCD module. In the present study a new manufacturing method which is called as direct surface forming(DSF) has been tested under various conditions. DSF is very similar to the well-known hot embossing except for partial contact between mold and substrate. The final V-groove pattern shows different shapes depend on the temperature of mold surface, contact time of mold and depth of V-groove.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.72-76
• /
• 2003

Even though embossing is an effective SDM(Structural Dynamics Modification) technique, it is difficult to implement the method in fields owing to its geometric complexity. In this research low flat-top emboss shape, rather than general shape, is considered and a systematic procedure is derived in describing the emboss implementation procedure utilizing the fact that the emboss shape can be fully expressed only if the boundary elements are appropriately given. Best position to maximize natural frequencies is found using the procedure and usefulness of the suggested technique is illustrated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.625-631
• /
• 2010

This paper proposes lane recognition algorithm using lane prominence technique to extract lane candidate. The lane prominence technique is combined with embossing effect, lane thickness check, and lane extraction using mask. The proposed lane recognition algorithm consists of preprocessing, lane candidate extraction and lane recognition. First, preprocessing is executed, which includes gray image acquisition, inverse perspective transform and gaussian blur. Second, lane candidate is extracted by using lane prominence technique. Finally, lane is recognized by using hough transform and least square method. To evaluate the proposed lane recognition algorithm, this algorithm was applied to the detection of lanes in the rainy and night day. The experiment results showed that the proposed algorithm can recognize lane in various environment. It means that the algorithm can be applied to lane recognition to drive unmanned vehicles.

• International Journal of Automotive Technology
• /
• v.6 no.5
• /
• pp.513-517
• /
• 2005

A full-bead of multi-layer-steel engine head gasket, taking charge of the dynamic sealing of combustion chamber, is susceptible to fatigue failure. The fatigue durability of full-bead was assessed with the finite element analysis results and the high-cycle multi-axial fatigue theory. The assessment aimed to reveal the effects of the forming parameters and dimensions of full-bead. The results show that the selection of embossing parameters producing less deformation of bead plate is beneficial for the improvement of durability while the flatting has marginal influence. The fatigue durability also improves with the increase in the width of full-bead and the radial length of bore-side flat region. However, the dimensional effects are limited due to the occurrence of snap-through.