• Structural Engineering and Mechanics
• /
• 제65권2호
• /
• pp.203-211
• /
• 2018

This paper introduces the development process of NCC(New Concrete Cutting) system and analyzes first verification test. Based on the first verification test results, some problems of NCC system have been newly modified. We carry out the second verification test. We tried to verify cutting performance and dust control efficiency of NCC system through the cutting test of concrete bridge piers. In particular, this verification test strives to solve the problem of concrete dust, which is the biggest problem of dry cutting method. The remaining dust problems in cutting section tried to solve through this verification test. This verification test of the NCC system shows that the dust problem of dry cutting method is closely controlled and solved. In conclusion, the proposed NCC method is superior to the dry cutting method in all aspects, including cutting performance, dust vacuum efficiency and cooling effect. The proposed NCC system is believed to be able to provide eco-friendly cutting technology to various industries, such as the removal of the SOC structures and the dismantling of nuclear plants, which have recently become a hot issue in the field of concrete cutting.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권2호
• /
• pp.123-132
• /
• 2014

The maritime sector is advancing with dedicated endeavor to reduce greenhouse gas in addressing issues with regards to global warming. Since 01 January 2013, the International Maritime Organization (IMO) regulation mandatory requirement for Energy Efficiency Design Index (EEDI) has been in place and should be satisfied by newly-built ships of more than 400 gross tonnage and the Ship Energy Efficiency Management Plan (SEEMP) for all ships type. Therefore, compliance to this necessitates planning during the design stage whereas verification can be carried-out through an acceptable method during sea trial. The MEPC-approved 2013 guidance, ISO 15016 and ISO 19019 on EEDI serves the purpose for calculation and verification of attained EEDI value. Individual ships EEDI value should be lower than the required value set by these regulations. The key factors for EEDI verification are power and speed assessment and their synchronization. The shaft power can be measured by telemeter system using strain gage during sea trial. However, calibration of shaft power onboard condition is complicated. Hence, it relies only on proficient technology that operates within the permitted ISO allowance. On the other hand, the ship speed can be measured and calibrated by differential ground positioning system (DGPS). An actual test on a newly-built vessel was carried out to assess the correlation of power and speed. The Energy-efficiency Design Index or Operational Indicator Monitoring System (EDiMS) software developed by the Dynamics Laboratory-Mokpo Maritime University (DL-MMU) and Green Marine Equipment RIS Center (GMERC) of Mokpo Maritime University was utilized for this investigation. In addition, the software can continuously monitor air emission and is a useful tool for inventory and ship energy management plan. This paper introduces the synchronization and identification method between shaft power and ship speed for EEDI verification in accordance with the ISO guidance.

• ETRI Journal
• /
• 제38권2호
• /
• pp.397-404
• /
• 2016

In group-oriented applications, it is often required to verify a group of signatures/messages. The individual verification of signed messages in such applications comes at a high cost in terms of computations and time. To improve computational efficiency and to speed up the verification process, a batch verification technique is a good alternative to individual verification. Such a technique is useful in many real-world applications, such as mail servers, e-commerce, banking transactions, and so on. In this work, we propose a new, efficient identity-based signature (IDS) scheme supporting batch verifications. We prove that the proposed IDS scheme and its various types of batch verifications is tightly related to the Computational Diffie.Hellman problem under a random oracle paradigm. We compare the efficiency of the proposed scheme with related schemes that support batch verifications.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권10호
• /
• pp.4703-4723
• /
• 2016

The verification of data integrity is an urgent topic in remote data storage environments with the wide deployment of cloud data storage services. Many traditional verification algorithms focus on the block-oriented verification to resolve the dispute of dynamic data integrity between the data owners and the storage service providers. However, these algorithms scarcely pay attention to the data verification charge and the users' verification experience. The users more concern about the availability of accessed files rather than data blocks. Moreover, the data verification charge limits the number of checked data in each verification. Therefore, we propose a mixed verification protocol to verify the data integrity, which rapidly locates the corrupted files by the file-oriented verification, and then identifies the corrupted blocks in these files by the block-oriented verification. Theoretical analysis and simulation results demonstrate that the protocol reduces the cost of the metadata computation and transmission relative to the traditional block-oriented verification at the expense of little cost of additional file-oriented metadata computation and storage at the data owner. Both the opportunity of data extracted and the scope of suspicious data are optimized to improve the verification efficiency under the same verification cost.

• 반도체디스플레이기술학회지
• /
• 제23권1호
• /
• pp.25-35
• /
• 2024

In the present modern day, as the complexity and size of SoC(System on Chip) increase, the importance of design verification are increasing, Therefore it takes a lot of time to verify the design. There is an emerging need to manage the verification environment faster and more efficiently by reusing the existing verification environment. UVM-based verification is a standardized and highly reliable verification method widely adopted and used in the semiconductor industry. This paper presents a UVM-based verification for the 4 tap equalizer module with a systolic array structure. Through the constraints randomization, it was confirmed that various test scenarios stimulus were generated. In addition, by verifying a simulation comparing the actual DUT outputs with the MATLAB reference outputs, the reuse and efficiency of the UVM test bench could be confirmed.

• Journal of Information Processing Systems
• /
• 제7권3호
• /
• pp.549-560
• /
• 2011

Vote validity proof and verification is an efficiency bottleneck and privacy drawback in homomorphic e-voting. The existing vote validity proof technique is inefficient and only achieves honest-verifier zero knowledge. In this paper, an efficient proof and verification technique is proposed to guarantee vote validity in homomorphic e-voting. The new proof technique is mainly based on hash function operations that only need a very small number of costly public key cryptographic operations. It can handle untrusted verifiers and achieve stronger zero knowledge privacy. As a result, the efficiency and privacy of homomorphic e-voting applications will be significantly improved.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권1호
• /
• pp.1-17
• /
• 2017

Mobile Cloud Computing has become a promising computing platform. It moves users' data to the centralized large data centers for users' mobile devices to conveniently access. Since the data storage service may not be fully trusted, many public verification algorithms are proposed to check the data integrity. However, these algorithms hardly consider the huge computational burden for the verifiers with resource-constrained mobile devices to execute the verification tasks. We propose an energy-efficient algorithm for assigning verification tasks (EEAVT) to optimize the energy consumption and assign the verification tasks by elastic and customizable ways. The algorithm prioritizes verification tasks according to the expected finish time of the verification, and assigns the number of checked blocks referring to devices' residual energy and available operation time. Theoretical analysis and experiment evaluation show that our algorithm not only shortens the verification finish time, but also decreases energy consumption, thus improving the efficiency and reliability of the verification.

• 한국조리학회지
• /
• 제13권1호
• /
• pp.143-151
• /
• 2007

The purpose of this study was to fine out a relation to the profitability in the view of market-orientation and examine the roles of marketing efficiency and adaptability in foodservice companies. In the previous studies, because of the concepts of market-orientation have mostly focused on hotels or common companies, in this study aimed to foodservice companies. This study was on the basis of Kohli & Jaworski (1990)'s theory. For the validity verification of measured items, SPSS WINDOW 10.0 was used to analyze factors and, for the reliability verification, Cronbach's Alpha coefficient was used. The result was as follows. First, market-orientation has great influence on customer satisfaction and customer loyalty. Second, customer satisfaction and customer loyalty were acquired for the good marketing efficiency and adaptability in foodservice companies. Thus, from now on, the foodservice company need to carry out the market-orientation concept.

• 산업기술연구
• /
• 제18권
• /
• pp.1-6
• /
• 1998

This study was conducted to use disused vinyl as biofilm for biological sewage treatment. Efficiency verification was performed on laboratory and on-site plant. In laboratory study, total biochemical oxygen demand(TBOD) removal rate was ranged 94.8~97 % in each hydraulic retention tim(HRT), 12, 16, 20, 24 hr, respectively. At that time, filling rate was 50 %. And effluent TBOD concentration was low ranged 3.64~6.28 mg/L. In on-site plant, TBOD removal rate was ranged 88.2~96.8 % and effluent TBOD concentration was 4.8~17.7mg/L. This concentration was lower than disign effluent concentration, 30mg/L. Total kjeldhal nitrogen(TKN) removal efficiency was ranged 56.8~90.9%. This was resulted higher than Lab. scale treatment efficiency.

• 대한전자공학회논문지SD
• /
• 제44권6호
• /
• pp.83-88
• /
• 2007

본 논문에서는 유기발광다이오드 구동 IC의 기능을 검증하기 위하여 PLI(Programing Language Interface)를 이용한 검증방법을 제안한다. 기능 검증을 하기 위하여 HDL(Hardware Description Language) 시뮬레이터와 PLI, GUI(Graphic User Interface) 환경의 이미지 뷰어를 이용한다. 본 논문에서 제안하는 유기발광다이오드 구동 IC의 기능 검증 방법을 이용 할 경우 종래의 기능 검증 방법을 이용 할 때 보다 40배의 실행 시간 이득을 얻을 수 있다. 제안한 방법을 이용할 경우 디스플레이 구동 IC의 설계 단계에서 기능 검증을 효율적으로 할 수 있을 것이다.