• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.672_673
• /
• 2009

In this paper seeks the parameter which relates with the efficiency from premium efficiency level single-phase induction motor. Also it compares with the parameters and it analyzes and an optimum parameter it seeks by FEM. Consquently, a optimal design is accomplished from the this paper. Also parameters compare efficiency. And it analyzes and studies about optimum parameter by FEM. The sample single-phase induction motor selection selected existing premium level motor. We analyze each parameter using 2-D finite element analysis (FEM). According to Study of losses and Design flow, losses and efficiency can be explain by many parameter. So this paper present optimal parameters. Finally, this paper presents the method which raises the efficiency of premium efficiency level single-phase induction motor.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.256-261
• /
• 2003

A memory industry is developing rapidly according to the period of the ubiquitous to approach. According to the development of a memory industry, the efficiency of the manufacture is becoming the serious consideration. DC parameter test system was a development low in this research for an efficiency increase of the manufacture. DC parameter test system increase of the manufacture. In the method to measure the output after permit volt and current at element.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.531-534
• /
• 2004

In Recent, it became necessary to develope the technology about electrodeless fluorescent lamp according to demand of the electodeless fluorescent lamp system that used higher efficiency and advantage of long-lifetime. Especially, in the electordeless fluorescent lamp which used H-mode, efficiency of lamp is decided from matching parameter of antena and inverter. So it is of the utmost importance to design antena and inverter Therefore, this paper used a transformer principle for efficiency rising of electrodeless fluorescent lamp and interpreted an equivalent circuit, used an impedance analyzer in order to confirm a performance enhancement of lamp along design of antenna, and confirmed parameter characteristic of R, L, C, Z, Q-factor along a change of magnetic flux density. Also, this paper confirmed a luminance characteristic of electordeless lamp along parameter change with measuring optical characteristic along a change of magnetic flux density

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.5
• /
• pp.345-350
• /
• 2011

This paper was carried about optimization for high efficiency of point contact solar cell. We have studied on the characteristics of power converter according to each parameter for the optimization for high efficiency of point contact solar cell on this study. We have 25.1352% of convert efficiency after adapt optimal parameters as mentioned in point body and superior conclusion is drawn by comparison with general efficiency has within 20%. At this time, the value of parameter is 100 um cell pitch, 0.01 um AR coating, 0.9 um N+ FSF thickness., etc. This study will continue to go on for optimization for efficiency in future, as it looks now, the results of this study would contribute to the business of high efficiency of point contact solar cell.

• Journal of the Korean Statistical Society
• /
• v.27 no.3
• /
• pp.251-264
• /
• 1998

When the LRT is not feasible, we define quasi-LRT(QLRT) as a modification of the LRT Under some appropriate conditions the QLRT shares Bahadur optimality and Bartlett Adjustability with the LRT. When we can find maximum likelihood estimator under the null parameter space but not under the unrestricted parameter space, our QLRT is Bahadur optimal as is the LRT We suggest the stopping rule of the Newton-Raphson iterations for constructing the QLRT statistics which are Bartlett adjustable.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.3
• /
• pp.549-559
• /
• 2015

The MDPDE is an attractive alternative to maximum likelihood estimator because of the strong robustness properties that it inherently possess. The characteristics of MDPDE can be varied with the tuning parameter, in general, there is a trade-off between robustness and asymptotic efficiency. Hence, selection of optimal tuning parameter is important but complicated task. In this study, we introduce two optimal tuning parameter selection methods proposed by Fujisawa and Eguchi (2005) and Warwick (2006). Through simulation study, we found out that Warwick's method yields excessively small optimal tuning parameter in certain cases while Fujisawa and Eguchi's method performs well. Therefore, we think Fujisawa and Eguchi's method can be used commonly for finding optimal tuning parameter of MDPDE.

• Proceedings of the KIEE Conference
• /
• 2000.07e
• /
• pp.162-166
• /
• 2000

In this paper, a maximum efficiency control technique of real-time processing in which parameter variation is compensated in vector control of an induction motors(I.M.) is proposed. Based on equivalent model of I.M., a loss minimization factor(LMF) with the variations of speed is derived. To solve problem of inaccuracy of LMF curves due to machine parameter variation, rotor resistance estimation is performed by using instantaneous reactive power. The estimated rotor resistance values are applied to the maximum efficiency control with a LMF.

• Journal of environmental and Sanitary engineering
• /
• v.10 no.2
• /
• pp.30-35
• /
• 1995

In this research effect of physicochemical parameter on flocculation using PASS-100 were evaluated. pEt flocculant dosage, mixing intensity and detention time were adopted as experimental variables. The physicochemical parameter( p% mixing intensity and mixing time ) were important Parameter on flocculation performance. Effluent pH range for effective flocculation was 4.5-7. Optimum Gt$_{d}$ range was 20,000-30,000 and its range similar to alum flucculation. Rapid mixing was very important parameter to floe formation in PASS- 100 flocculation. Whereas, slow mixing did not affect to the removal efficiency at settling time for 30minute or more.

• Communications for Statistical Applications and Methods
• /
• v.10 no.1
• /
• pp.145-151
• /
• 2003

We shall propose several estimators for the scale parameter in the uniform distribution when the parameter is functions of a known exposure level, and obtain expectations and variances for their proposed estimators. And we shall compare numerically relative efficiencies for proposed estimators of the scale parameter in the small sample sizes.

• Journal of Institute of Convergence Technology
• /
• v.1 no.1
• /
• pp.41-47
• /
• 2011

With the world-wide demand on the emission minimization, the needs on the diesel aftertreatment devices with high efficiency are also increasing. In order to effectively develop or design a high-performance diesel particulate filter, a clear understanding on the deposition and regeneration mechanism is required. In the present study, a theory on the lumped parameter model for wall-flow type diesel particulate filters is described focusing on the deposition efficiency, pressure drop inside the filter. The fourth order explicit Runge-Kutta method is utilized for the mass flow rate computation. Engine operation modes with controlled and uncontrolled regeneration options are selected. The computational lumped parameter model is validated by comparing the computed results with the measured data.