• Korean journal of applied entomology
• /
• v.52 no.4
• /
• pp.387-394
• /
• 2013

The developmental times of mealworm beetle larvae, Tenebrio molitor were studied at six temperatures ranging from 15 to $30^{\circ}C$ with 60~70% RH, and a photoperiod of 14L:10D. Mortality of larval period was very low at 17 and $20^{\circ}C$ but did not die over $22^{\circ}C$. Developmental time of larva was decreased with increasing temperature. The total developmental time of T. molitor larvae was longest at $17^{\circ}C$ (244.3 days) and shortest at $30^{\circ}C$ (110.8 days). Egg and larvae were not developed at $15^{\circ}C$. The lower developmental threshold and effective accumulative temperatures for the total larval stages were $6.0^{\circ}C$ and 2564.1 degree-days, respectively. The relationship between developmental rate and temperature was fitted by a linear model and nonlinear model of Logan-6($r^2$=0.95). The distribution of completion of each development stage was well described by the 2-parameter Weibull function ($r^2$=0.8502~0.9390).

• Journal of fish pathology
• /
• v.32 no.2
• /
• pp.105-111
• /
• 2019

Citurs unshiu Markovich is a medicinal product of dried tangerine peel (DTP). It is effective on antioxidation, and getting fame as a medicine and functional food. By utilizing DTP as a feed additive, we aim to enhance the growth rate, innate immunity, and bacterial infection resistance to Tilapia. The DTP extract was added to the feed weight by 0.1, 0.5, 1, 5% and then fed to tilapia for 7 days to evaluate the innate immunity parameter, growth rate and anti-bacterial activity. Innate immunity parameter results showed that the ROI was significantly higher in the 5% group added at high concentration, while showing decrease or no differences in other experimental groups. In other parameters, all the experimental groups showed no significant difference or decreased compared to the control group. The challenge test showed a high survival rate of 71% in the 0.5% group and the lowest in the control group (36%). For the growth rate, the feed efficiency was improved in all groups except for the 0.1% group compared to the control group. In conclusion, DTP extract has bacterial resistant effect in while not affecting innate immune system of fish. Also, it has shown the potential as a possible feed additive as it has brought the improvement on feed efficiency ratio.

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.4
• /
• pp.243-250
• /
• 2009

Fifty percent ethanol extract of Lythrum salicaria Linne root (LSR) was tested in vitro on antioxidant activity, and furthermore was investigated on antioxidative and fibrosis protecting activities in $CCL_4$-induced liver fibrosis rat model. Ratio of hepatic GSH/GSSG (reduced glutathione/oxidized glutathione) as bio-parameter of antioxidant level in $CCL_4$ plus LSR-treated rats for 6 weeks significantly increased from 2.8- to 5.7-fold than that of $CCL_4$-treated rats at p < 0.05. Thiobarbituric acid reactive substances (TBARS) contents in $CCL_4$ plus LSR-treated rats ranged from 1.57- to 2.19-fold of normal rats and were lower than those in $CCL_4$ plus silymarin-treated rats ($1.78{\sim}2.46$-fold of normal rats) (p < 0.05). Amounts of hydroxyproline of liver tissue showing the content of total collagen, a parameter of fibrosis, in $CCL_4$ plus LSR-administrated rat livers were $4.9{\sim}8.8{\mu}g$/mg ($-47{\sim}-71%$, compared with that in $CCL_4$-treated rat livers ($16.6{\mu}g$/mg tissue), which were significantly lower than those in $CCL_4$ plus silymarin-administrated rats being $8.4{\sim}11.7{\mu}g$/mg ($-30{\sim}-50%$). This collagen reducing effect of liver tissue in $CCL_4$ plus LSR-treated rats was supported by histological observation using microscopy assay. From the results, we conclude that the root of L. salicaria have efficient antioxidant potential and effective antifibrotic activities.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.1
• /
• pp.151-160
• /
• 1999

A series of laboratory tests for the marine clay sampled under the sea of Kwangyang bay have been conducted. The main types of tests are the general index property tests, the oedometer tests and the triaxial compression tests in both undrained(CIU) and drained(CID) conditions. The clayey samples, classified as CL, CH with natural water content of 38.3~84.6% and liquidity index of 0.71~0.98, are in the normally consolidated state with O.C.R. of 1.0l~l.60. The undrained stress path from CIU tests can be normalized with isotropic consolidation pressure$(p_0)$ and equal shear strain contour is linear passing through the origin in the (q, p) plot. The undrained shear strain is found to be the only function of the stress ratio($\eta$) and linear with intercept in the ($\varepsilon/\eta,\eta$) plot. The built-up pore pressure normalized with pc is also linear with respect to $\eta$. and its slope is defined by ´C´ as a pore pressure parameter. Equations to predict the undrained stress path and the shear strain are proposed. It is proved that the proposed equations give better agreements to the measured values than the Cam-clay theories. The failure points of the stress path are located on the same C.S.L. in (q, p) plot during both CIU and CID tests, which justifies the concept of critical state theory.

• Archives of design research
• /
• v.17 no.2
• /
• pp.279-288
• /
• 2004

Corporate design activities have expanded from being exclusive and passive responsibilities to active participation in planning, marketing, technology and corporate brand image differentiation for successful business. Thus the communications between designers and other functions come to include critical decision making, information sharing, and objective reasoning. Given that design activities now have to involve various functions in product development, the styling-related design process, which is still developed by designer's intuition and experience, poses as an obstacle not just between various functions involved, but even within the design function. To overcome this obstacle and to lead more effective design decision process, a means for product form development assessment and management is necessary. This research proposes a foundation for managing and assessing product form based on the hypothesis and demonstration of discovering a system of formative factor and order a product form expresses that can be shared as an objective and logical system. As a result of this demonstration, the form as a unique visual expression and the factors related to the form and its co-relationship are examined. The factors are called formative parameters and the system is named as the product form alignment method. Based on the logic derived from the system, the process for developing an image that aligns with the predefined goal is explained. The method defines a balance between a designer's intuitive creativity and the extracted logic, which can act as a basis for designers to share design language among themselves and for communication between design and other functions. Based on this system, designers are able to align design work with the set goal, and focus and limit the range of form development, which is anticipated to result in lead-time reduction and minimizing unnecessary obstacles and mistakes.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1357-1364
• /
• 2000

Our study was performed to evaluate the effect of leaching parameters including the physicochemical characteristics and the fractionated composition of heavy metals on the release of heavy metals in fly ash discharged from MSWI. Leaching parameters such as pH, CEC, particle size, and exchangeable fraction among the fractional composition classified by sequential extraction procedure are considered. The leaching rate of heavy metal released by KSLT method is largely dependent on the pH of fly ash. The effect of pH on the release of heavy metals is different from elements. It appears that the leaching rate of cadmium and copper decreases with increasing pH, while lead and zinc increases at the condition of neutral or strong alkali condition, which suggests that the leaching of heavy metals are limited by the solubility. It is found that the effect of CEC is similarly to that of pH, $D_{10}$ among the particle size of fly ash is negative correlated with the concentration of heavy metals leached by KSLT method. In the case of exchangeable fraction, the leaching rate of heavy metals is linearly correlated with the exchangeable fraction for the fly ash below 40 meq/l00g of CEC, but not related out of the range.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.145-145
• /
• 2008

High-k materials have been paid much more attention for their characteristics with high permittivity to reduce the leakage current through the scaled gate oxide. Among the high-k materials, $ZrO_2$ is one of the most attractive ones combing such favorable properties as a high dielectric constant (k= 20 ~ 25), wide band gap (5 ~ 7 eV) as well as a close thermal expansion coefficient with Si that results in good thermal stability of the $ZrO_2$/Si structure. During the etching process, plasma etching has been widely used to define fine-line patterns, selectively remove materials over topography, planarize surfaces, and trip photoresist. About the high-k materials etching, the relation between the etch characteristics of high-k dielectric materials and plasma properties is required to be studied more to match standard processing procedure with low damaged removal process. Among several etching techniques, we chose the inductively coupled plasma (ICP) for high-density plasma, easy control of ion energy and flux, low ownership and simple structure. And the $BCl_3$ was included in the gas due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. During the etching process, the wafer surface temperature is an important parameter, until now, there is less study on temperature parameter. In this study, the etch mechanism of $ZrO_2$ thin film was investigated in function of $Cl_2$ addition to $BCl_3$/Ar gas mixture ratio, RF power and DC-bias power based on substrate temperature increased from $10^{\circ}C$ to $80^{\circ}C$. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by scanning emission spectroscope (SEM). The chemical state of film was investigated using energy dispersive X-ray (EDX).

• Journal of the Korea Concrete Institute
• /
• v.15 no.4
• /
• pp.606-614
• /
• 2003

The major cause of deterioration for the concrete bridge decks exposed to de-icing chemicals would be chloride-induced reinforcement corrosion. Thus, in this paper, in order to predict time to corrosion for concrete bridge decks in the urban area, chloride concentration was measured with depth from the surface. A frequency analysis on surface chloride concentration and chloride diffusion coefficient of concrete bridge deck equals 0.192, 29.828 in the scale parameter and 7.899, 1.983 in the shape parameter of gamma distribution. The average value of surface chloride concentration equals 1.5 kg/㎥ and condenses from 1 to 2 kg/㎥ in the level of probability 70%. From the probabilistic results, it is confirmed that 26mm of minimum cover depth in order to target 20 years over is calculated. The countermeasure strategy to extend the service life of concrete bridge deck exposed to de-icing chemicals would be an effective method to increase cover depth and to place high performance concrete, which could lead to reduce the chloride diffusion coefficient and distribution range.

• The Journal of Korean Academy of Sensory Integration
• /
• v.7 no.2
• /
• pp.77-90
• /
• 2009

Objective : The purpose of this study was to provide evidence for the effectiveness of Sensory Integrative Intervention (SII) through a systematic review. Method : The systematic review was executed using MEDLINE/PubMed, PsycINFO, CINAHL, Cochrane Library, OTSeeker. The key words for search was "effects of sensory integration", "sensory integration therapy", and "sensory integration intervention". 11 studies were used for data analysis, and the level of evidence were level I, leve lII and level IV. The substances of review were subject (population), method (intervention type), effect of the intervention, outcome parameter, and outcome measurement. Results : 1. The subjects of SII were autism spectrum disorders (30.7%), pervasive developmental disorder (15.4%) and preterm infants (15.4%). 2. Most frequently used method was the traditional intervention of J. Ayres (36.5%). The outcome parameters of SII were behavioral outcome (40.63%), motor performance outcome (28.13%), sensory-based outcome (25.0%), and academic outcome (6.35%). 3. The effects of SII were improvement of motor performance (66.7%), sensory-based (62.5%), and behavior problems (61.5%). In most studies, however, academic skill such as writing skill was not a positive outcome parameter in terms of effectiveness of SII. Conclusions : The results implied that the sensory integrative intervention is effective on motor performance, sensory-based and behavioral change, but not on the academic skill. It is suggested that the future research need to be done to examine whether and how the effect of sensory integration intervention can be long-lasting and contribute any academic skill and activities of daily living performance.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.3
• /
• pp.17-25
• /
• 2012

Wire bonding process in making semiconductor needs the most precise control and Critical To Quality(CTQ). Thus, it is regarded to be the most essential step in packaging process. In this process, pure gold wire is used to connect the chip and PCB(substrate or lead frame). However, the price of gold has been skyrocketing continuously for a long period of time and is expected to further increase in the near future. This phenomenon situates us in an unfavorable condition amidst the competitive environment. To avoid this situation, many semiconductor material making companies developed new types of wires: Au.Ag wire is one material followed by many others. This study is aimed to optimize the parameter in wire bonding with the use of 6sigma and QFD(Quality Function Deployment). 6sigma process is a good means to not only solve the problem, but to increase productivity. In order to find the key factor, we focused on VOB(Voice of Business) and VOC(Voice of Customer). The main factors from VOB, VOC are called CTQ. However, there were times when these main factors were far from offering us the correct answer, thus making the situation more difficult to handle. This study shows that QFD aids in deciding which of the accurate factors to undertake. Normally QFD is used in designing and developing products. 6sigma process is held more effective when it used with QFD.