• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.5
• /
• pp.10-15
• /
• 2011

Histogram equalization is an effective method to enhance the contrast of the image. However, it can result in unwanted artifacts such as excessive contrast enhancement and noise amplification. These artifacts can be reduced by modifying an intensity mapping function which is generated by histogram equalization. In this paper, we present a variational approach to the modification of the intensity mapping function. We define a functional whose minimization produces a modified intensity mapping function. Experimental results show that the intensity mapping function obtained by the proposed method can enhance the contrast of the image without visual artifacts.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.117-120
• /
• 2002

Electrical power system has very complexity problem that it is plan measurement system to achieve Harmonic State Estimation (HSE). This complexity problem depends on discord of necessary accuracy, certainty of noise that exist in data communication damage and converter, adaptability of network modification and minimum of expense size of system, estimated monitering. Also, quantity of available measurement equipment for harmonic measurement has been limited. Therefore, systematic method that choose measurement location for harmonic state estimation. This paper is that see proposed HSE that use Observability Analysis(OA) for harmonic state estimation of electrical power system. OA depends on measurement number, measurement location and measurement form here, it is analysis method that depend on network form and admittance of the system. OA used achieve harmonic state estimation that it is Applied to New Zealand electrical power system to prove validity of HSE algorithm that propose. This study result about harmonic state estimation of electrical power system displayed very economical and effective method by OA.

• Journal of Veterinary Clinics
• /
• v.38 no.1
• /
• pp.32-35
• /
• 2021

Three dogs (a 30-month-old spayed female English bulldog; a 12-month-old castrated male English bulldog; a 19-month-old castrated male Shar-pei dog) were presented to the Dana Animal Hospital Eye Center with clinical signs of blepharospasm, epiphora, and ocular discharge (serous to mucopurulent) in one or both eyes. Through ophthalmic examination, the dogs (5 eyes) were diagnosed with trichiasis caused by upper and lower eyelid entropion, including the lateral canthus. To correct upper and lower eyelid entropion, modification using a combination of the Stades forced granulation method for upper eyelid entropion and Hotz-Celsus procedure for lower eyelid entropion was performed in all cases. At the last follow-up, mean 274 days after surgery, clinical signs disappeared and no recurrences of entropion were observed in any of the 3 dogs (5 eyes). Therefore, the combination of the Stades forced granulation method and Hotz-Celsus procedure may be an effective treatment for trichiasis caused by upper and lower eyelid entropion in dogs.

• Journal of the HCI Society of Korea
• /
• v.2 no.1
• /
• pp.33-39
• /
• 2007

Because of the cognitive overload which is caused by the complicated information structure, Digital Convergence product interferes with the effective retrieval of the information from the menu. Two methods have been used to alleviate that cognitive overload by making an effective menu structure; physical menu structure method which is related with the width and depth of the menu, semantic menu structure method which is related with the menu title. In this research, we tried to demonstrate the effectiveness of the menu structure designing method by suggesting a new semantic methodology which uses the Fixation and Fixation duration which are accompanied by the visual search. Because the Fixation is automatically processed by the human cognitive model, we could easily recognize whether the information structure is correspond to the cognitive model or not. From this fact we established the hypothesis that the number of cognitively well established menu structures are fewer than that of the wrongly designed menu structures in terms of the Fixation number and Duration. To verify this hypothesis, we compared the Fixation number and Duration of the modified menu structures with those of the original menu structures by using the Eye-Tracking experiment. As a result, we could find the significant decrease of the Fixation number and Duration after modification. Therefore we could recognize that the modified menu structure was more effective than the original menu structure. In sum, the newly suggested menu structure designing methodology which uses the Fixation and Fixation Duration accompanied by the visual search was proved to be a very effective method.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.1137-1144
• /
• 2009

Creativity, the ability to produce through imaginative skill, is pursued by all designers. However, originality does not refer to absolute novelty. In this age, information is shared and disseminated. Creation of works is an activity to re-establish all shared information and reorganize relationship among things. Therefore, a new design is a product of reorganization rather than originality. Moreover, designers can generate ideas different from each other because they individually espouse different system of knowledge. From such perspective, a very important task of designers is to explore methods of expanding design thinking that can enhance the ability to new connection among things in the process of assimilation and modification. The task can be carried out by identifying characteristics and limits of their unique system of knowledge. Therefore, it is necessary to seek methods of expanding design thinking for efficient cognitive activities. In explaining human knowledge, this study applied semantic network, a method used in cognitive science for creating structure, and the method of expanding design thought was proposed by corresponding method of design conceptualization. By organizing, categorizing, and flexibly combining and modifying the methods of design thinking conceptualization and expansion generated by this study, strengths of each method were enhanced and limits of each method were overcome to enable more effective design thinking. In this study, the method of expansion was used when connecting of nodes cannot be sustained after using each method of conceptualization. By avoiding unique method of thinking through diversification and vitalization of conditional points, efficient design thinking was achieved. The value of this study lies in the fact that the proposed method of expanding thinking using the mechanism of network enhances the ability to establish new connections in the process of assimilation and modification.

• Computers and Concrete
• /
• v.21 no.1
• /
• pp.67-74
• /
• 2018

A differential scheme based micromechanical framework is proposed to obtain the effective properties of the saturated concrete repaired by the electrochemical deposition method (EDM) considering the interfacial transition zone (ITZ) effects. The constituents of the repaired concrete are treated as different phases, consisting of (micro-)cracks, (micro-)voids and (micro-)pores (occupied by water), deposition products, intrinsic concrete made up by the three traditional solid phases (i.e., mortar, coarse aggregates and their interfaces) and the ITZs. By incorporating the composite sphere assemblage (CSA) model and the differential approach, a new multilevel homogenization scheme is utilized to quantitatively estimate the mechanical performance of the repaired concrete with the ITZs. The CSA model is modified to obtain the effective properties of the equivalent particle, which is a three-phase composite made up of the water, deposition products and the ITZs. The differential scheme is employed to reach the equivalent composite of the concrete repaired by EDM considering the ITZ effects. Moreover, modification procedures considering the ITZ effects are presented to attain the properties of the repaired concrete in the dry state. Results in this study are compared with those of the existing models and the experimental data. It is found that the predictions herein agree better with the experimental data than the previous models.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.5
• /
• pp.53-58
• /
• 2002

A recent development, a concrete-filled steel(CFS) pier is an alternative to a reinforced concrete bridge pier in an urban area, because of its fast construction and excellent ductility against earthquakes. The capacity of CFS piers has not been used to a practical design, because there is no guide of a seismic design for CFS piers. Therefore, the guide of a seismic design value is derived from tests of CFS piers in order to apply it to a practical seismic design. Steel piers and concrete-filled steel piers are tested with constant axial load using quasi-static cyclic lateral load to check ductile capacity and using the real Kobe ground motion of pseudo-dynamic test to verify seismic performance. The results prove that CFS piers have more satisfactory ductility and strength than steel piers and relatively large hysteretic damping in dynamic behaviors. The seismic performance of steel and CFS piers is quantified on the basis of the test results. These results are evaluated through comparison of both the response modification factor method by elastic response spectrum and the performance-based design method by capacity spectrum and demand spectrum using effective viscous damping. The response modification factor of CFS piers is presented to apply in seismic design on a basis of this evaluation for a seismic performance.

• Korean Journal of Agricultural Science
• /
• v.38 no.2
• /
• pp.269-275
• /
• 2011

The objective of this study was to develop a rapid and reliable PCR method for sexing of morula or blastocyst stage bovine embryo. BOV97M and bovine 1.715 satellite DNA sequences were selected for amplification of male and bovine specific DNA, respectively. But the unbalanced number of copies of these two repetitive sequences required some modification of PCR method. Karyotyping of blastomeres were carried for the confirmation of sex determination in bovine embryos. The coincidence rate of sex between biopsied-single blastomere and matched blastocyst was 80.0%. When in vivo- and in vitro- derived embryos were compared, 61.8% and 56.7% were male in in vitro- and in vivo-derived embryos, respectively. In vivo-derived embryos showed better hatching rate than in vitro-derived embryos following biopsy of blastomeres. In conclusion, rapid and effective PCR could be applied to sexing of bovine preimplantation embryos using single blastomere. The sensitivity of this assay may eliminate the need for biopsy of more than one nucleated blastomere and reduce trauma to the embryos derived from biopsy procedure.

• Journal of Chest Surgery
• /
• v.31 no.7
• /
• pp.703-710
• /
• 1998

We treated 654 patients with simultaneous bilateral sympathectomy for essential hyperhidrosis from March 1989 to September 1997(354 males and 300 females). The exposure afforded by thoracoscopy is actually superior to that seen at the time of either thoracotomy or axillary thoracotomy. The use of single-lumen intubation with alternating partially collapsed lung by CO2 inflation resulted in shorter anesthesia, shorter operative time, and shorter hospitalization. 2-mm extended thoracoscopic T2-sympathectomy is not only a time-saving method but also a very simple and effective one in the treatment of hyperhidrosis by experienced surgeons. The modification on our technique of thoracoscopic sympathectomy as described allowed us to significantly improve our previous results. A majority of the patients were relieved, and over 95% were satisfied initially.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.4
• /
• pp.120-127
• /
• 2009

Spindle units of machine tool are very important part in the manufacturing area. Recently high speed machining has become the main issue of metal cutting. To develop high speed machine tools, a lot of studies have been carried out for high speed spindle. Due to increase of the rotational speed of the spindle, there has been renewal of interest in vibration of spindle. This paper concerns the improvement of spindle design using design of experiments. To improve the design of critical speed and weight of spindle, the experiments using central composite method have been carried out. The targets are critical speed and weight of spindle. For optimization of critical speed and weight and optimization of only critical speed by operation of all area search through response optimizer, the result of analysis has improved design of each factor. Finite element analyses are performed by using the commercial codes ARMD, CATIA V5 and ANSYS workbench. From the results, it has been shown that the proposed method is effective for modification of spindle design to improve critical speed and weight.