• 산업기술연구
• /
• 제7권
• /
• pp.9-14
• /
• 1987

The maximum specific gravity of asphaltic concrete can be calculated based on the effective specific gravity of aggregates and the specific gravity of asphalt cement. The maximum specific gravity is sometimes obtained based on the apparent specific gravity of aggregates and specific gravity of asphalt concrete. However, the apparent specific gravity is in general greater than the effective specific gravity for most aggregates. This study showed, by comparing the results obtained based on two specific gravities, that application of the apparent specific gravity instead of the effective specific gravity resulted in discrepancies in the calculated values of effective asphalt content, air void and maximum density.

• 설비공학논문집
• /
• 제14권7호
• /
• pp.543-551
• /
• 2002

Gravity ventilators allow the escape of the warm air and air contaminants due to both (either) buoyancy and (or) convection. As a natural ventilation strategy, various gravity ventilators can be installed on the roof. Ventilation efficiency could be affected by various parameters, such as, area of openings, wind velocity and incidence angle, temperature difference between inside and outside, and shape of ventilator. Especially, the shape of roof gravity ventilator might be one of influencing factors for the effective ventilation. The window type gravity ventilators are frequently installed instead of general (standard) gravity ventilator. However, the ventilation efficiencies of them were not proved yet. To compare the ventilation efficiency, general type ventilator and two window type ventilators were numerically tested. Mean age of air, temperature and CO concentration were predicted by using commercial CFD code, AIRPAK (Ver. 2.0) with various conditions. The predicted result showed that general type ventilator is more effective for natural ventilation than window type ventilators.

• 천문학회지
• /
• 제39권4호
• /
• pp.125-128
• /
• 2006

In order to determine the precise effective temperature and surface gravity of warm stars, all synthetic spectral lines in the wavelength range of $4000-5700{\AA}$ with T=6000-7750 K, and log g=3.5, 4.0, and 4.5 for [M/H]=0.0, $V_{rot}$=10 km $s^{-1}$, and $V_{tubl}$=2 km $s^{-1}$ were calculated using the SYNSPEC package(Hubeny, et al., 1995) and the Kurucz(1995) model. Then, the depth-ratios for all line pairs were investigated and we selected two and six depth-ratios appropriate for the surface gravity and temperature indicators, respectively. We plotted six grids with X- and Y-axes for the depth-ratios of surface gravity and temperature, respectively, for the simultaneous estimation of these two atmospheric parameters. This method was applied to the spectum of $\delta$ Scu for the determination of its temperature and surface gravity simultaneously.

• 대한지구과학교육학회지
• /
• 제1권1호
• /
• pp.72-84
• /
• 2008

This study is focused on the main concepts of gravity and geomagnetics which are introduced in the earth science textbooks of high school in 7th curriculum. This study examines the validity and accuracy of the Earth Science textbooks and shows some effective teaching plans by using the latest materials. This study also illustrates the main concepts of gravity and geomagnetics through presenting some effective and practical teaching-learning methods. The results of the study were as follows: First of all, a number of main concepts of six textbooks of high school were selected; the field of gravity, the direction and dimension of gravity, the measurement of gravity, the main reason of gravity anomaly and geoid, earth terrestrial magnetic field, secular variation of goemagnetics. Secondly, most Earth Science textbooks of high school explains the main concepts of the gravity and geomagnetics in similar ways. Those textbooks, however, don't put an emphasis on the essential contents which has been regarded as important thing in terms of the current educational course of study. The high school textbooks also use the material which is too old-fashioned and has some problems of accuracy and validity. Especially, many main concepts of the textbooks and scientific data(such as the direction of gravity, the measurement of gravity, the main reason of gravity anomaly, the use of geoid, secular variation) are different with those of South Korea, In addition, some materials(graphs and diagrams) are very old ones and they don't have authentic information.Finally, Among the various main concepts, some important ideas (the direction of the gravity and the method of measuring gravity, the measurement and use of gravity anomaly, the definition of geoid and secular variation of geomagnetics) should be corrected by showing the latest and authentic materials.

• 천문학회지
• /
• 제44권3호
• /
• pp.73-79
• /
• 2011

We collect 24 times of light maxima data from sources in the literature, unpublished data and open databases, and investigate the variations of the observed and calculated (O-C) values for light maxima of V1719 Cyg. We found no evidence of the variations in the (O-C) values. We estimate the effective temperature and surface gravity using both the Kurucz and MARCS/SSG grids for different metallicity values [A/H]=0.0 and +0.5 for V1719 Cyg. It is confirmed that the temperature is almost the same, but, in the case of surface gravity, the MARCS/SSG grid gives the value closest to that obtained from the period-gravity relation derived by using the pulsation-evolution theory. We obtain two spectra of V1719 Cyg from spectroscopic observation which permitted us to find the effective temperature and the surface gravity of the star directly. We estimate the metallicity and it is found that the abundance of iron is equal to the solar value.

• Earthquakes and Structures
• /
• 제25권4호
• /
• pp.297-305
• /
• 2023

The conventional method of structural seismic design was based on increasing structural capacity, which usually didn't reduce earthquake seismic effects. By changing the philosophy of structure design, technologies such as passive seismic control have been used in structures. So far, a large number of seismic isolation systems have been introduced to dissipate earthquake energy that is applied to a structure. These systems act against earthquakes rather than increasing the strength and capacity of the structure. In the present paper, a suspended column called a "pendulum column" is investigated, and a new idea has been considered to improve the performance of the pendulum column isolator by changing the gravity effect by adding a spring under the isolator system. The behavior of the studied isolator system has been researched. Then the isolator system was investigated under different earthquakes and compared with a common pendulum column isolator. The results show that changing the gravity effect has an effective role in the response of the system by reducing the system stiffness. Equations for the system showed that even in a special state, complete isolation is possible. Finally, the tested model verified the theory.

• Earthquakes and Structures
• /
• 제6권3호
• /
• pp.251-266
• /
• 2014

Dynamic analyses for a suite of ground of motions were conducted on concrete gravity dam sections to examine the earthquake induced stresses and effective damping. For this purpose, frequency domain methods that rigorously incorporate dam-reservoir-foundation interaction and time domain methods with approximate hydrodynamic foundation interaction effects were employed. The maximum principal tensile stresses and their distribution at the dam base, which are important parameters for concrete dam design, were obtained using the frequency domain approach. Prediction equations were proposed for these stresses and their distribution at the dam base. Comparisons of the stress results obtained using frequency and time domain methods revealed that the dam height and ratio of modulus of elasticity of foundation rock to concrete are significant parameters that may influence earthquake induced stresses. A new effective damping prediction equation was proposed in order to estimate earthquake stresses accurately with the approximate time domain approach.

• 한국측량학회지
• /
• 제29권5호
• /
• pp.543-550
• /
• 2011

중력이상값은 지구물리, 측지 및 국방 등 다양한 분야에서 활용되는 기초 지구물리 자료로서, 특정 위치에서의 중력이상값을 필요로 하는 경우 일반적으로 데이터베이스화 되어 있는 중력이상값으로부터 내삽하여 활용한다. 그러나 중력은 지형 및 지하광물 등에 의하여 다양하게 변할 수 있는 물리량으로, 내삽에서 가정한 선형성, 2차 곡선 등의 성질이 만족되지 않으면 그 결과로 계산된 중력이상값은 실제 중력값과 큰 차이를 나타내게 된다. 또한, 내삽을 통하여 계산되는 결과값은 이론적으로 조화함수를 만족하여야 한다는 중력의 물리적 성질을 반영하지 못한다. 본 연구에서는 이와 같은 문제점을 보완하기 위하여 필요에 따라 유연하게 중력이상값을 계산할 수 있도록 중력 모델링을 수행하였다. 모델링은 평면푸리에 시리즈와 point-mass 함수를 기저함수로 하는 두 방법을 기반으로 수행되었고, 구축된 모델은 내삽으로부터 산출된 결과와 비교하여 특성을 분석하였다. 또한 모델링의 결과와 내삽 방법을 중력참조항법에 적용하여 활용적인 측면을 검토하였다. 연구결과, 기복이 완만한 지역에서는 평면푸리에 시리즈와 point-mass 및 내삽으로부터 계산된 중력이상값이 유사하게 나타났으나, 중력의 기복이 큰 지역에서는 모델 및 내삽에 의한 결과가 큰 차이를 나타내었다. 특히 주변의 네 점을 이용하여 선형으로 계산하는 Bilinear 내삽함수를 이용한 경우가 가장 완만한 중력값을 보이는 반면 point-mass 함수로부터 산출된 결과가 고주파에서 가장 큰 값을 나타내었다. 또한, 모델링 및 내삽에 필요한 자료의 로딩 및 계산 시간을 비교한 결과, 중력참조항법의 경우 중력값의 계산은 모델링을 수행하는 경우가 데이터베이스에 기반을 둔 내삽보다 효율적임을 알 수 있었다. 본 연구에서는 중력모델링의 결과 및 특성을 분석하였으며, 향후 모델링은 중력참조항법과 같은 활용분야에 있어 가장 효율적인 신호의 특성과 해상도를 지닌 중력 자료를 제공할 수 있는 기술로 활용될 수 있을 것으로 사료된다.

• 한국측량학회지
• /
• 제27권2호
• /
• pp.129-138
• /
• 2009

달 중력장은 달의 내부구조와 이분성 및 마그마 바다의 분화 진화과정을 이해하고, 더 나아가 달의 기원과 진화를 규명하기 위한 중요한 자료이다. 본 연구에서는 달 탐사의 역사와 달의 중력장 탐지 및 중력장모델의 발전과정을 고찰하였으며, 최근에 임무를 종료한 일본의 SELENE위성의 관측방식을 소개하고, SELENE위성의 궤도추적자료를 처리하여 개발된 달 중력장모델 SGM90d(SELENE Gravity Model)를 이용해 달 전체의 중력이상을 결정하였으며, 기존의 달 중력장 모델인 LP165P모델과 비교분석을 수행하였다. SGM90d를 분석해 본 결과, SELENE위성의 4중 도플러 관측방식은 달 뒷면의 중력장 직접 관측에 매우 효과적이었으며, 달 뒷면 중력장의 최초 결정은 달의 메스콘과 같은 중력이상의 상세한 분포를 확인하고 달의 이분성을 이해하는데 큰 도움이 되었다.

• 상하수도학회지
• /
• 제20권4호
• /
• pp.617-626
• /
• 2006

Compared with the sludge from gravity sedimentation, it is difficult for operations to settle the sludge occurred from dissolved-air-flotation (DAF). Even though there are some problems in treating DAF sludge with conventional gravity thickeners, those has been used until now. In this study, Solid Flux theory for gravity thickening was applied to the Solid Flux of DAF sludge through flotation in order to develop new methodology for treatment of DAF sludge. Also, characteristics of DAF sludge were investigated. From the experiment results, it was revealed that the higher the polymer dosage, at fixed the solid concentration, the greater the rising velocity becomes. When we applied solid flux theory, the relationship, which is similar to that of gravity thickening, has been achieved. Also, we could find the proper polymer dosage from the rising velocity is about 50 mg/L. Consequently, the limiting solid flux can be derived from the relationship between the total solid flux and the withdrawal velocity of DAF sludge. Furthermore, the factors, such as solid concentrations, bubble volume, pH, zeta potential, and temperature, have effects on the flotation and sedimentation for DAF sludge treatment.