• Journal of Industrial Technology
• /
• v.7
• /
• pp.9-14
• /
• 1987

The maximum specific gravity of asphaltic concrete can be calculated based on the effective specific gravity of aggregates and the specific gravity of asphalt cement. The maximum specific gravity is sometimes obtained based on the apparent specific gravity of aggregates and specific gravity of asphalt concrete. However, the apparent specific gravity is in general greater than the effective specific gravity for most aggregates. This study showed, by comparing the results obtained based on two specific gravities, that application of the apparent specific gravity instead of the effective specific gravity resulted in discrepancies in the calculated values of effective asphalt content, air void and maximum density.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.7
• /
• pp.543-551
• /
• 2002

Gravity ventilators allow the escape of the warm air and air contaminants due to both (either) buoyancy and (or) convection. As a natural ventilation strategy, various gravity ventilators can be installed on the roof. Ventilation efficiency could be affected by various parameters, such as, area of openings, wind velocity and incidence angle, temperature difference between inside and outside, and shape of ventilator. Especially, the shape of roof gravity ventilator might be one of influencing factors for the effective ventilation. The window type gravity ventilators are frequently installed instead of general (standard) gravity ventilator. However, the ventilation efficiencies of them were not proved yet. To compare the ventilation efficiency, general type ventilator and two window type ventilators were numerically tested. Mean age of air, temperature and CO concentration were predicted by using commercial CFD code, AIRPAK (Ver. 2.0) with various conditions. The predicted result showed that general type ventilator is more effective for natural ventilation than window type ventilators.

• Journal of The Korean Astronomical Society
• /
• v.39 no.4
• /
• pp.125-128
• /
• 2006

In order to determine the precise effective temperature and surface gravity of warm stars, all synthetic spectral lines in the wavelength range of $4000-5700{\AA}$ with T=6000-7750 K, and log g=3.5, 4.0, and 4.5 for [M/H]=0.0, $V_{rot}$=10 km $s^{-1}$, and $V_{tubl}$=2 km $s^{-1}$ were calculated using the SYNSPEC package(Hubeny, et al., 1995) and the Kurucz(1995) model. Then, the depth-ratios for all line pairs were investigated and we selected two and six depth-ratios appropriate for the surface gravity and temperature indicators, respectively. We plotted six grids with X- and Y-axes for the depth-ratios of surface gravity and temperature, respectively, for the simultaneous estimation of these two atmospheric parameters. This method was applied to the spectum of $\delta$ Scu for the determination of its temperature and surface gravity simultaneously.

• Journal of the Korean Society of Earth Science Education
• /
• v.1 no.1
• /
• pp.72-84
• /
• 2008

This study is focused on the main concepts of gravity and geomagnetics which are introduced in the earth science textbooks of high school in 7th curriculum. This study examines the validity and accuracy of the Earth Science textbooks and shows some effective teaching plans by using the latest materials. This study also illustrates the main concepts of gravity and geomagnetics through presenting some effective and practical teaching-learning methods. The results of the study were as follows: First of all, a number of main concepts of six textbooks of high school were selected; the field of gravity, the direction and dimension of gravity, the measurement of gravity, the main reason of gravity anomaly and geoid, earth terrestrial magnetic field, secular variation of goemagnetics. Secondly, most Earth Science textbooks of high school explains the main concepts of the gravity and geomagnetics in similar ways. Those textbooks, however, don't put an emphasis on the essential contents which has been regarded as important thing in terms of the current educational course of study. The high school textbooks also use the material which is too old-fashioned and has some problems of accuracy and validity. Especially, many main concepts of the textbooks and scientific data(such as the direction of gravity, the measurement of gravity, the main reason of gravity anomaly, the use of geoid, secular variation) are different with those of South Korea, In addition, some materials(graphs and diagrams) are very old ones and they don't have authentic information.Finally, Among the various main concepts, some important ideas (the direction of the gravity and the method of measuring gravity, the measurement and use of gravity anomaly, the definition of geoid and secular variation of geomagnetics) should be corrected by showing the latest and authentic materials.

• Journal of The Korean Astronomical Society
• /
• v.44 no.3
• /
• pp.73-79
• /
• 2011

We collect 24 times of light maxima data from sources in the literature, unpublished data and open databases, and investigate the variations of the observed and calculated (O-C) values for light maxima of V1719 Cyg. We found no evidence of the variations in the (O-C) values. We estimate the effective temperature and surface gravity using both the Kurucz and MARCS/SSG grids for different metallicity values [A/H]=0.0 and +0.5 for V1719 Cyg. It is confirmed that the temperature is almost the same, but, in the case of surface gravity, the MARCS/SSG grid gives the value closest to that obtained from the period-gravity relation derived by using the pulsation-evolution theory. We obtain two spectra of V1719 Cyg from spectroscopic observation which permitted us to find the effective temperature and the surface gravity of the star directly. We estimate the metallicity and it is found that the abundance of iron is equal to the solar value.

• Earthquakes and Structures
• /
• v.25 no.4
• /
• pp.297-305
• /
• 2023

The conventional method of structural seismic design was based on increasing structural capacity, which usually didn't reduce earthquake seismic effects. By changing the philosophy of structure design, technologies such as passive seismic control have been used in structures. So far, a large number of seismic isolation systems have been introduced to dissipate earthquake energy that is applied to a structure. These systems act against earthquakes rather than increasing the strength and capacity of the structure. In the present paper, a suspended column called a "pendulum column" is investigated, and a new idea has been considered to improve the performance of the pendulum column isolator by changing the gravity effect by adding a spring under the isolator system. The behavior of the studied isolator system has been researched. Then the isolator system was investigated under different earthquakes and compared with a common pendulum column isolator. The results show that changing the gravity effect has an effective role in the response of the system by reducing the system stiffness. Equations for the system showed that even in a special state, complete isolation is possible. Finally, the tested model verified the theory.

• Earthquakes and Structures
• /
• v.6 no.3
• /
• pp.251-266
• /
• 2014

Dynamic analyses for a suite of ground of motions were conducted on concrete gravity dam sections to examine the earthquake induced stresses and effective damping. For this purpose, frequency domain methods that rigorously incorporate dam-reservoir-foundation interaction and time domain methods with approximate hydrodynamic foundation interaction effects were employed. The maximum principal tensile stresses and their distribution at the dam base, which are important parameters for concrete dam design, were obtained using the frequency domain approach. Prediction equations were proposed for these stresses and their distribution at the dam base. Comparisons of the stress results obtained using frequency and time domain methods revealed that the dam height and ratio of modulus of elasticity of foundation rock to concrete are significant parameters that may influence earthquake induced stresses. A new effective damping prediction equation was proposed in order to estimate earthquake stresses accurately with the approximate time domain approach.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.543-550
• /
• 2011

The gravity anomaly is a basic geophysical data applied in various fields such as geophysics, geodesy and national defense. In general, the gravity anomaly is used through a interpolation process based on the constructed database. The gravity variation, however, is appeared in various shapes depending on the topography and the density of the underground structures. Therefore, the interpolation could lead to a large differences if the gravity fields do not satisfy the assumptions on the signal behavior like linear or a certain degree polynomials. Furthermore, the interpolation does not reflect the physical characteristics of the gravity such as the harmonic condition. In this study, the gravity modeling using the plane Fourier series and radial basis functions are performed to overcome the problems in the usual interpolation. The results of the modeling is analyzed for the case of the gravity referenced navigation focused on the signal characteristics. Based on the study, it was found that the results from modeling are not much different to that from the interpolation in a smoothly varied area. In case of the highly varied area, however, a large differences are appeared among the three methods. Especially, the Fourier series shows the most smooth variations in the modeled gravity values while the highest variations appeared in the interpolation. Applying to the gravity referenced navigation, it was found that the modeling is more effective in calculation cost. It is considered that the results from this study provides a basis on effective modeling of the gravity fields in terms of the signal characteristics and resolution for various application fields.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.129-138
• /
• 2009

The lunar gravity field is an important source to understand the lunar interior structure, dichotomy and magma ocean of the moon, furthermore it can be used to study the origin and evolution history of the moon. In this paper, we firstly investigated the history of lunar exploration were performed for determining the lunar gravity field, in addition to investigating the procedure of progress related with the lunar gravity field model and gravity observations techniques. After, we determined practically the gravity anomalies of the moon using the new lunar gravity model, SGM90d (SELENE Gravity Model), which were developed by processing the tracking data from SELENE, the japanese lunar mission. Finally, we compared the lunar gravity anomalies from SGM90d model to the those from existing lunar gravity model (LP165P). As results from the comparison, we can make a sense that 4-way Doppler observations of SELENE is very effective to measure the gravity field on the farside of the moon. The precise lunar gravity field model including the farside of the moon which can be more helpful to understand the dichotomy of moon and to establish the detailed distribution of lunar gravity field, such as a mascon.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.4
• /
• pp.617-626
• /
• 2006

Compared with the sludge from gravity sedimentation, it is difficult for operations to settle the sludge occurred from dissolved-air-flotation (DAF). Even though there are some problems in treating DAF sludge with conventional gravity thickeners, those has been used until now. In this study, Solid Flux theory for gravity thickening was applied to the Solid Flux of DAF sludge through flotation in order to develop new methodology for treatment of DAF sludge. Also, characteristics of DAF sludge were investigated. From the experiment results, it was revealed that the higher the polymer dosage, at fixed the solid concentration, the greater the rising velocity becomes. When we applied solid flux theory, the relationship, which is similar to that of gravity thickening, has been achieved. Also, we could find the proper polymer dosage from the rising velocity is about 50 mg/L. Consequently, the limiting solid flux can be derived from the relationship between the total solid flux and the withdrawal velocity of DAF sludge. Furthermore, the factors, such as solid concentrations, bubble volume, pH, zeta potential, and temperature, have effects on the flotation and sedimentation for DAF sludge treatment.