• 수산해양교육연구
• /
• 제29권1호
• /
• pp.286-296
• /
• 2017

This paper conducted a simulation to research the motion of a vessel, which had the flooding accident in the Bering Sea in 2014, thereby being flooded and un-steerable. As the wind condition was very harsh, the vessel was modeled as 3D including large upper deck structures and the Fujiwara's method was used for an estimation of the effect of wind forces and moments acting on ship. In the case of wave influence, AQWA-Drift that enables considering the effects of drift force and AQWA-Naut that enables considering the effects of green water were mainly used. Basically, loading and flooding condition were equal to the accident condition but half-drained condition was also used to consider drain ability. Furthermore, both 6 DOF and 5 DOF option that Yaw motion is fixed, were utilized to compare the steerable and un-steerable condition. As a result, the author found out that what roll angle triggers green water, how often it happens, and how the vessel moves on the stormy weather condition.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.213-217
• /
• 2008

This paper describes an application of centrifugal compressor optimization system, in which the blade profile of impeller is represented with NURBS(Non-Uniform Rational B-Spline) curve. A commercial CFD(Computational Fluid Dynamics) program named NUMECA fine/turbo was used to evaluate the performance of the whole centrifugal compressor flow passage including impeller and diffuser. The whole optimization design system was integrated based on iSIGHT, a commercial integration and optimization software, which provides a direct application of some optimization algorithms. To insure the practicability of optimization, the performance of centrifugal compressor under all condition was concerned during the optimizing process. That means a compositive object function considering the aerodynamic efficiency, pressure ratio and mass flow rate under different work condition was applied by using different weight number for different conditions. Using the optimization method described in this paper, an optimized design of the impeller blade of centrifugal compressor was obtained. Comparing to the original design, optimized design has a better performance not only under the design work condition, but also the off-design work condition including near stall and near choke condition.

• 대한수학회보
• /
• 제41권3호
• /
• pp.465-472
• /
• 2004

A group G is said to satisfy the maximal condition on infinite normal subgroups if there does not exist an infinite properly ascending chain of infinite normal subgroups. We characterize the structure of locally nilpotent groups satisfying this chain condition. We then show how to construct locally nilpotent groups with the maximal condition on infinite normal subgroups, but not the maximal condition on subgroups.

• 대한치과기공학회지
• /
• 제39권3호
• /
• pp.179-185
• /
• 2017

Purpose: It is intended to raise awareness of importance of protective equipment and necessity of safety education by examining the actual condition of measures to deal with accident, occurrence of injury, whether safety education is received or not, the actual condition of wearing protective equipment, and working environment of dental lab and dental technician. Methods: A self-administered survey was conducted for a total of 150 dental technologists. A chi-squared test and independent-samples t-test was carried out by using SPSS WIN Program (version 12.0) in order to analyze the actual condition of safety education according to work experience and position and whether injury occurred according to whether to wear protective equipment. Significance level was 0.05. Results: With regard to whether injury occurred according to whether safety education was received, there was 'receiving the safety education-injured (71.8%)', 'not receiving the safety education-injured (79.7%)', 'receiving the safety education-not injured (28.2%)', and 'not receiving the safety education-not injured (20.3%)'. The statistical results of injury occurrence according to safety education were not significant. With regard to whether to be injured according work experience, there was 'less than 10 years-injured (68.4%)', 'less than 10 years- not injured (31.6%)', '10 years or above-injured (89.1%)', and '10 years or above-not injured (10.9%)'. The statistical results of injury occurrence according to work experience were significant (p<0.001). Conclusion: Dental lab and specialized agencies should continue to be interested in periodic safety training, recommending wearing protective equipment and personal protective equipment support and so on.

• 품질경영학회지
• /
• 제44권1호
• /
• pp.121-138
• /
• 2016

Purpose: Financial institute employees have various education programs for enhancing customer satisfaction. The purpose of this study is to explore critical factors that affect the service commitment in the financial institution and to propose the implication for employee's service involvement. Methods: This study is intended to identify how service quality of education, servicescape, and learning motivation affect the service commitment. The research model proposed in this study is tested via a survey of 322 employees for financial institution employees. Results: This study shows that tangibles, reliability, assurance and ambient condition, physical structure, symbolic artifacts and internal motivation, extrinsic motivation significantly influence education satisfaction. Tangibles, reliability and ambient condition, physical structure, symbolic artifacts and internal motivation significantly influence affective service orientation and that tangibles, reliability, assurance and extrinsic motivation significantly influence altruistic service orientation. It also verifies that education satisfaction affective service orientation, and altruistic service orientation positively affect service commitment. Conclusion: This study suggests critical factors to promote service commitment in the financial institute. It has focused on not only the service quality of education program, but also servicescape and learning motivation as the meaningful factors for increasing the employee's service involvement.

• 한국가정과학회지
• /
• 제7권3호
• /
• pp.59-71
• /
• 2004

The purpose of this study is to emboss the importance of safety education by recognizing the instructor's thoughts on safety and the prevention of safety accidents of early-childhood through the examination, analysis of the education site of safety at early-childhood education facilities. The subject of this were 120 early-childhood teachers in the Jeonbuk areas. The data were collected using questionaries and analyzed by the statistical methods of frequencies. ANOVA with SPSS pc program. The research questions were as follows; 1. What is the understanding of early-childhood teachers on safety recognition? 2. Is there a difference in the understanding of the teacher on safety and the management of the education curriculum on safety education that is being taught at early-childhood education facilities? The main results and solutions of this study were as follows: 1. In order for early-childhood teachers to teach safety education in early-childhood education facilities, they must join a safety mutual aid association or join an insurance policy to furnish an appropriate compensation system. Also, safety education must be systematically taught at a $social{\cdot}national$ level so that teachers and young children can have an understanding on safety under the support and concern of early-childhood education facilities and administration authorities. 2. Results on the comparison of the understanding of safety education and management of actual education of teachers on the actual conditions of the education curriculum of safety education show that although teachers are aware of most items of safety education but the actual education was not being taught. This means that although the teachers are aware of the importance of safety education, the actual education is not being taught.

• 한국치위생학회지
• /
• 제13권6호
• /
• pp.1031-1039
• /
• 2013

Objectives : The purpose of this study is to improve the oral health knowledge in children education institute teacher. Methods : Data were selected by convenience sampling method. A self-administered questionnaire was filled out by the children education institute teachers. Frequency analysis and $x^2$ test were used to analyze the actual condition of oral health education and utilizing media contents. Pearson's Results : 1. The teachers received the oral health education (94.3%) twice to five times. 2. There was a difference between position and career of teacher in implementing oral health education. 3. Most of the oral health education were done by the dentists. Tooth brushing method was the most common education contents. Skill demonstration was the most common teaching method. 4. There was a positive correlation between experience and implementation of oral health education. 5. Use of education media accounted for 74.1% in oral health education. The number of media was more than two to five. 6. Self-devised media contents were the most commonly used in oral health education. Visual materials, dentiform and tooth brush were the most common contents in oral health education. Conclusions : It is necessary to develop the systematic and repetitive oral health education curriculum for the children education institute teachers. The dissemination of media for oral care is needed for oral health care knowledge acquisition.

• 한국산업융합학회 논문집
• /
• 제7권4호
• /
• pp.419-424
• /
• 2004

In order to increase the efficiency of the sawdust machine, the helical type drums with an oblique cutting condition (3D) were developed. The preexisting drums have an orthogonal cutting condition (2D) considering of a saw cutter and a wood cutting pattern. Unfortunately, the disadvantages of this type drum are the big cutting resistance, the high cost of a cutting power and the extreme occurrence of a vibration. To improve this shortcoming, the helical type drum with an oblique cutting condition was developed. Therefore, this type drum decreased the vibration and the cutting resistance of the sawdust machine, and also improved the productivity of 30% or more and the porosity of the sawdust.

• 대한수학회논문집
• /
• 제14권2호
• /
• pp.337-352
• /
• 1999

In this paper we find a geometric condition for the weaker principle of spatial averaging (PSA) for a class of polyhedral domains. Let \ulcorner be a polyhedron in R\ulcorner, n$\leq$3. If all dihedral angles of \ulcorner are submultiples of $\pi$, then there exists a parallelopiped \ulcorner generated by n linearily independent vectors {\ulcorner}\ulcorner in R\ulcorner containing \ulcorner so that solutions of $\Delta$u+λu=0 in \ulcorner with either the boundary condition u=0 or ∂u/∂n=0 are expressed by linear combinations of those of $\Delta$u+λn=0 in \ulcorner with periodic boundary condition. Moreover, if {\ulcorner}\ulcorner satisfies rational condition, we guarantee the weaker PSA for the domain \ulcorner.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제16권2호
• /
• pp.199-212
• /
• 2009

We investigate the multiplicity of the nontrivial periodic solutions for a class of the system of the nonlinear suspension bridge equations with Dirichlet boundary condition and periodic condition. We show that the system has at least two nontrivial periodic solutions by the abstract version of the critical point theory on the manifold with boundary. We investigate the geometry of the sublevel sets of the corresponding functional of the system and the topology of the sublevel sets. Since the functional is strongly indefinite, we use the notion of the suitable version of the Palais-Smale condition.