• Elastomers and Composites
• /
• v.53 no.4
• /
• pp.213-219
• /
• 2018

The degradation mechanism and physical properties of an FKM O-ring were observed with thermal aging in this experiment. From X-ray photoelectron spectroscopy (XPS) analysis, we could observe carbon (285 eV), fluoro (688 eV), and oxygen (531 eV) peaks. Before thermal aging, the concentration of fluoro atoms was 51.23%, which decreased to 8.29% after thermal aging. The concentration of oxygen atoms increased from 3.16% to 20.39%. Under thermal aging, the FKM O-ring exhibited debonding of the fluoro-bond by oxidation. Analysis of the C1s, O1s, and F1s peaks revealed that the degradation reaction usually occurred at the C-F, C-F2, and C-F3 bonds, and generated a carboxyl group (-COOH) by oxidation. Due to the debonding reaction and decreasing mobility, the glass transition temperature of the FKM O-ring increased from $-15.91^{\circ}C$ to $-13.79^{\circ}C$. From the intermittent CSR test, the initial sealing force was 2,149.6 N, which decreased to 1,156.2 N after thermal aging. Thus, under thermal aging, the sealing force decreased to 46.2%, compared with its initial state. This phenomenon was caused by the debonding reaction and decreasing mobility of the FKM O-ring. The S-S curve exhibited a 50% increase in modulus, with break at a low strain and stress state. This was also attributed to the decreasing mobility due to thermal aging degradation.

• Kyungpook Mathematical Journal
• /
• v.18 no.1
• /
• pp.105-107
• /
• 1978

Considering the prime z-filters on a topological space X through the structures of the ring C(X) of continuous functions. a prime z-filter is uniquely determined by a primary z-ideal in the ring C(X), i. e., they have a one-to-one correspondence. Any primary ideal is contained in a unique maximal ideal in C(X). Denoting $\mathfrak{F}(X)$, $\mathfrak{Q}(X)$, 𝔐(X) the prime, primary-z, maximal spectra, respectively, $\mathfrak{Q}(X)$ is neither an open nor a closed subspace of $\mathfrak{F}(X)$.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.241-245
• /
• 1998

This paper gives the novel design of compensated ring anode-short for power GTO thyristor. By means of this design the power GTO of $\Phi$63.5mm 2500A/4500V reaches more uniform turn-off compared with conventional ring short GTO, resulting in higher turn-off ability and low tail current/tail time.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2585-2591
• /
• 2012

A series of heterocyclic chalcone derivatives bearing heterocycles such as thiophene or furan ring as an isostere of benzene ring were carefully prepared, and the influence of heterocycles on 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activities was systematically investigated. Structure-activity relationships (SAR) analysis showed that the activities of thiophene ring-containing chalcones were higher than those of furan ring-containing chalcones, and the presence of methyl substituent of heterocyclic ring distinctly affected the activities compared with non-substituted heterocycles in an opposite manner, with the 4'-methyl group of thiophene ring increasing activity and the 3'-methyl group of the furan ring decreasing activity. The distinct isosteric effect of heterocycles (i.e., thiophene or furan ring) on radical scavenging activities of heterocyclic chalones was distinctly demonstrated in our work.

• Transactions of Materials Processing
• /
• v.19 no.8
• /
• pp.494-501
• /
• 2010

The main objective of this study is to examine the sensitivity of calibration curves of FEA of ring compression test to frictional shear factor. Ring compression test has been investigated by measuring dimensional changes at different positions of ring specimen and they include the changes in internal diameter at the middle and top section of the specimen, outer diameter at the middle and top section, surface expansion at the top surface, respectively. Initial ring geometries employed in analysis maintain a fixed ratio of 6 : 3 : 2, i.e. outer diameter : inner diameter : thickness of the ring specimen, which is generally known as 'standard' specimen. A rigid plastic material for different work-hardening characteristics has been modeled for simulations using rigid-plastic finite element code. Analyses have been performed within a definite range of friction as well as over whole range of friction to show different sensitivities to the interfacial friction for different ranges of friction. The results of investigation in this study have been summarized in terms of a dimensionless gradient. It has been known from the results that the dimensional changes at different positions of ring specimen show different linearity and sensitivity to the frictional condition on the contact surface.

• 한국해양학회지
• /
• v.8 no.2
• /
• pp.68-74
• /
• 1973

The present paper concerns the age determination and growth of butter fish, Pampus argenteus from the southwestern waters of Korea by otolith reading. 743 specimens taken by stow-net in the southern part of the Yellow Sea and northeastern part of the East China Sea during the period from October 1972 to September 1973 were examined. Results of the study are summarized as follows: 1. Sex ratio of females to males was found to be 2:1. 2. Ring marks on the otolith were found to be formed twice a year, once during the period of January-May and the other time in September. 3. The Lee's phenomenon was observed on the otolith sample. 4. The relationship between the radius of otolith(R) and fork length(L) was found to be as follows: R=0.3069+0.0133L 5. Calculated fork length at the time of otolith ring formation are found to be as follows:I-ring,71.67mm; II-ring, 125.05mm; III-ring, 168.65mm; IV-ring, 201.74mm; V-ring, 225.80mm; VI-ring, 240.84mm. 6. Maximum fork length calculated according to the diagram of Walford's growth transformation was found to be 281.5mm. 7. Growth curve, when related to the von Bertalanffy's equation, was laid out as $L_{t}=281.5[1-e$^{-0.674(t-0.128)}]$

• Bulletin of the Korean Mathematical Society
• /
• v.49 no.4
• /
• pp.885-898
• /
• 2012

Let m, n, r be nonzero fixed positive integers, R a 2-torsion free prime ring, Q its right Martindale quotient ring, and L a non-central Lie ideal of R. Let D : $R{\rightarrow}R$ be a skew derivation of R and $E(x)=D(x^{m+n+r})-D(x^m)x^{n+r}-x^mD(x^n)x^r-x^{m+n}D(x^r)$. We prove that if $E(x)=0$ for all $x{\in}L$, then D is a usual derivation of R or R satisfies $s_4(x_1,{\ldots},x_4)$, the standard identity of degree 4.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.194-194
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.1105-1106
• /
• 2013

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.901-902
• /
• 2011