• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.2
• /
• pp.90-95
• /
• 2017

In case of working for the construction of blocks of any ship in a floating dry dock, there may exist deflection in the pontoon deck of the floating dock due to the ballast loading and the self weight of the ship and the floating dock. This paper is on the development of the measuring system and the GUI program to show the real time variation of the deflections at even-spaced positions by several pressure gages and the calculated inclination of the floating dock. The measured and calculated data produced by this developed system could be used to prepare the protection plan on site like ballast adjustment to ensure the safety of working during the floating dock operation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.757-760
• /
• 2006

This study aims to manufacture ultra fine cement(UFC) with a multi air-classifier of the dry-type. The classifier employed and devised for materials refining was a cyclone type fitted with an air suction device. This study also investigates the basic physical properties and quality of UFC and evaluates its utilizable possibility as a construction material. The basic properties of the UFC containing granulated blast furnace slag were analyzed and examined through recovery ratio, particle size distribution, scanning electron microscopy and compressive strength. Results obtained from the analysis of ultra fine cement have shown that there are possibilities for manufacturing UFC, which could compensate the weak properties of ordinary Portland cement.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.3
• /
• pp.187-194
• /
• 1999

In this study, a series of items on the safety and stability of cracked main structure in subway are investigated and analyzed. Cracks due to dry contraction under the construction can be found when a tensile stress of cross section is higher than tensile strength at a value of coefficient of dry contraction $200{\times}10^{-6}$. It is concluded that there is no problems when load carrying capacity, that is, an ability of resisting loads of structure is enough in this analytical model. Also, it is concluded that this model has a desirable serviceability because a width of bending crack is lower than allowable one.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.667-675
• /
• 2008

As a large construction such as highway, dam, reclaimed land etc. increase in number more and more, large amount of fill materials are required. However, it's difficult to obtain it because of environmental problems and economical efficiency. A alternative plan is to utilize a gypsum which is a by-product yielded from chemical plants and verify suitability to use gypsum as fill materials. Therefore, a characteristic of compaction for gypsum is analyzed and construction methods are given regard to this characteristic from construction of dike using gypsum. Based on the results obtained, it is found that moisture of gypsum in compaction should to be more dry side of O.M.C(optimal moisture content) because of sponge phenomenon. When gypsum is used to fill materials, standards of compaction should be decided from laboratory test.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.533-537
• /
• 2004

The erodibility of soil is an important factor to scour, especially in fine-grained soils. In this study, the erosion characteristics of kaolinite are quantified through the scour rate tests using the Erosion Function Apparatus called EFA. The basic soil property tests are also performed. The kaolinite samples are prepared by mixing with distilled water and formed to the designed maximum consolidation pressure of 60, 110, 160, 240, 360kPa, respectively. The results of the scour rate tests are presented in a format of a plot showing the relationship between erosion rates and shear stresses. Erosion properties of kaolinite showed a striking contrast according to the maximum consolidation pressure, and a correlation was established between the erosion properties of kaolinite and the soil properties; water content, undrained shear strength, dry density.

• Steel and Composite Structures
• /
• v.20 no.5
• /
• pp.999-1022
• /
• 2016

The use of Carbon Fiber Reinforced Polymer (CFRP) to strengthen steel structures has attracted the attention of researchers greatly. Previous studies demonstrated bonding of CFRP plates to the steel sections has been a successful method to increase the mechanical properties. However, the main limitation to popular use of steel/CFRP strengthening system is the concern on durability of bonding between steel and CFRP in various environmental conditions. The paper evaluates the performance of I-section steel beams strengthened with pultruded CFRP plate on the bottom flange after exposure to diverse conditions including natural tropical climate, wet/dry cycles, plain water, salt water and acidic solution. Four-point bending tests were performed at specific intervals and the mechanical properties were compared to the control beam. Besides, the ductility of the strengthened beams and distribution of shear stress in adhesive layer were investigated thoroughly. The study found the adhesive layer was the critical part and the performance of the system related directly to its behavior. The highest strength degradation was observed for the beams immersed in salt water around 18% after 8 months exposure. Besides, the ductility of all strengthened beams increased after exposure. A theoretical procedure was employed to model the degradation of epoxy adhesive.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.4
• /
• pp.131-140
• /
• 1994

Recently, tunnels are increasingly constructed in this country with the increased construction of highways, high-speed railways and subways. Shotcreting is one of the major processes in the tunnel construction. Many problems, however, exist in the current shotcreting practice. The purpose of the present study is, therefore, to explore the problems in the current shotcreting practice, to derive an optimum mix for efficient shotcreting, To this end, extensive experimental study has been conducted. Optimum mixes with high quality and economy were derived. The present study provides a firm bast: in our country to apply high-quality shotcrete in tunnel construction.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.55-63
• /
• 2007

Deformational characteristics of subgrade soils are important properties in the mechanistic analysis and design of pavement system. In this study, to evaluate the effect of specimen construction methods on deformational characteristics of subgrade soils in Korea, resonant column tests were performed for specimens constructed by various methods. Specimen construction method affected to the modulus value but the variation in the normalized modulus reduction curve was almost identical. The effects of specimen construction method on modulus are decreased with increasing confining pressure. The average maximum variation in the modulus value with different specimen construction methods was estimated as 16.8%. The differences in the modulus value of the specimens with same water content and dry density conditions that made by gyratory compaction and impact compaction were very small within 5.2%. The impact compaction method was proposed as a specimen construction method for determining the design input parameter testing considering that impact compaction method is much simpler and require less expensive specimen construction equipment and setup than gyratory compaction method.

• Journal of Biosystems Engineering
• /
• v.33 no.2
• /
• pp.83-93
• /
• 2008

In order to save labor and cost, direct seeding has been considered as an important alternative to the machine transplanting in rice cultivation. Current direct seeding machines for rice in Korea drill irregularly under various operating conditions. This study was conducted to develope a precision seeder which enables the accurate, even-spaced in row placement of rice seeds at uniform depths of 3-4 cm on dry paddy. Design, construction and performance evaluation of the precision seeder were carried out. The tractor rear-mounted type 8-rows precision seeder which performs seeding in addition to fertilizing, ditching, and rotary tilling works on dry paddy was developed. Main components of the seeder were ditcher and leveller, rotary tiller, powered roller type furrow opener, seeding device, powered roller type furrow covering and firming device, hydraulic unit, seeding speed control system, power transmission system, hitch and frame. Ditching, furrow opening, and seed covering and firming performances were good and seeding depths of 2-4 cm could be maintained. Planting accuracies and planting precisions were within 13.6%, and 31.2%, respectively, for planting space of 15 cm, and seeding velocity of 0.5 m/s. These mean variations of average planting space were within 2.1 cm, and 90% of seeds in a hill were seeded within 4.7 cm of hill length, respectively. Error ratios between setting planting space and measured average planting space were shown within 6.7%. Therefore the seeder showed good planting performance up to seeding velocity of 0.5 m/s in field tests. And field capacity of the seeder was about 0.28 ha/hour.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.3
• /
• pp.281-299
• /
• 2017

The inventory management of radionuclides is essential for the safe management of disposal facilities. In this study, we compared the activity of dry active waste predicted using the generated waste data and that measured for the accepted waste in the disposal facility. For very low level waste, the measured activity was higher than the predicted activity for $^{137}CS$, $^{90}Sr$, $^{99}Tc$ and $^{129}I$. In low level waste, the predicted activity was higher than the measured activity for all radionuclides. We also evaluated the variation in the predicted quantity and total activity of each level of dry active waste through a sensitivity analysis on a scaling factor. This result will contribute to the construction of a Safety Case and safe operation of disposal facilities.