• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.221-226
• /
• 2017

The objective of this study was to find out the most optimal bulbil size and planting densities of garlic bulbils to germination for production of leaf garlic. In the first this experiment, the bulbils classified by the size of bulbil to Big (>0.2) and Small (${\leq}0.2$), were planted at $13,680bulbils/m^2$ and $18,240bulbils/m^2$ (Big), $18,240bulbils/m^2$ and $22,800bulbils/m^2$ (Small), respectively. The germination rate, plant height and total yield were measured. In the second experiment, length, width, fresh weight and dry weight of 200 garlic bulbils were measured to analyze the correlation of days to first germination, T50 and germination rate. In the first experiment, the germination rate showed the highest at Big bulbils. The density of $18,240bulbils/m^2$ was the most suitable for cultivation because of the highest germination rate. In the case of yield, it was found that both of the fresh weight and the dry weight of Big bulbil was 2.8 times heavier than Small bulbil. Therefore, Big bulbil with the density of $18,240bulbils/m^2$ was the most suitable for cultivation because of the highest yield. The correlation between each factor of morphological characteristics had a positive correlation between fresh weight, dry weight and width. Also, the germination rate had a positive correlation with fresh weight and width. And, days to first germination and T50 had a negative correlation with fresh weight and width. In conclusion, the optimal planting density is $18,240bulbils/m^2$ and the optimal size of bulbil was 0.2g or more. However, thicker and heavier bulbils could lead to higher and faster germination.

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.50-55
• /
• 2013

The objective of this research was to investigate the impact of Ca fertilizer on the growth of mother plants, physiological disorders, and occurrence of daughter plants in propagation of 'Seolhyang' strawberry through plastic bag cultivation. To achieve this, chemicals of 1.125 mM $Ca(OH)_2$, 0.375 mM $MgCl_2$, 1.250 mM KCl were blended and designated to combined fertilizer (CF). Then, the effect was compared to the treatment of no Ca application (control) and a commercial fertilizer, CalMag (13-0-1.9-16-6:N-$P_2O_5$-$K_2O$-CaO-MgO), when those were applied every two weeks with controlled electrical conductivity (EC) of solution such as 0.6 or 1.0 $dS{\cdot}m^{-1}$. The number of plants showing Ca deficiency symptoms was the highest in control treatment, but those decreased significantly in CF or CalMag treatments. The differences between CF and CalMag in appearance of Ca deficient plants were not significant when two fertilizers were applied with same EC. The fresh and dry weights of mother plants were the greater in the treatments of CF or CalMag than those of control treatment. The treatments of 1.0 $dS{\cdot}m^{-1}$ of CF or CalMag were more effective than those of 0.6 $dS{\cdot}m^{-1}$ on the fresh and dry weight of the mother plants. The runner lengths in the treatment of 1.0 $dS{\cdot}m^{-1}$ of CF were the longest among the all treatments tested. The treatments of 1.0 $dS{\cdot}m^{-1}$ were more effective than those of 0.6 $dS{\cdot}m^{-1}$ of CF or CalMag in lengths and fresh and dry weight of runners. The fresh and dry weights of daughter plants were heavier in the treatments of CF than those of CalMag. Based on the above results, we concluded that the Ca deficiency in raising 'Seolhyang' strawberry can be lessened by the application of Ca containing fertilizers, but combined application of Ca, K and Mg was more effective than that of Ca alone for seedling production.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.4
• /
• pp.373-381
• /
• 1994

This experiment was conducted to investigate the effects of nitrogen fertilizer level on forage yield and feed value, and to clarify the optimum nitrogen fertilizer level of rye in middle west area when cultured in paddy field. The field experiment treated 5 levels of nitrogen fertilization was carried out at Yesan from Oct. 1990 to June 1991. The fresh and dry weight increased with increased nitrogen fertilizer level by 30kg /10a, but dry matter ratio decreased. The ratio of leaf blade and leaf sheath in rye plant increased with increased nitrogen fertilizer level, but the ratio of stem and inflorescence decreased. The content and yield per unit area for protein, total digestible nutrient(TDN). Minerals, and energy increased with increased nitrogen fertilizer level, while acid detergent fiber(ADF) and neutral detergent fiber(NDF) decreased. The ratio of available protein among crude protein became higher with increased nitrogen fertilizer level. The optimum clipping time for net energy gain(NEG) and net energy maintenance(NEM) were 10 days earlier than milk stage for conventional items including TDN and proteins.

• Horticultural Science & Technology
• /
• v.30 no.5
• /
• pp.579-585
• /
• 2012

This study was carried out to investigate the effect of potassium silicate on the growth and leaf epidermal characteristics of horticultural crops viz., begonia (Begonia semperflorens Link et Otto) 'Super Olympia Red' and 'Super Olympia Rose' and pansy (Viola ${\times}$ wittrockiana Hort.) 'Matrix White Blotch' and 'Matrix Yellow Blotch' in vitro. Seeds after germination were grown on a quarter strength MS medium supplemented with potassium silicate ($K_2SiO_3$) at 0, 100, 200, or $300mg{\cdot}L^{-1}$ and were maintained under a photoperiod of 16 hours at $25^{\circ}C$. Growth parameters such as plant height, root length, chlorophyll content, fresh, and dry weights have been recorded after a growth period of 58 days for begonia and 94 days for pansy. In begonia, fresh weight was significantly greatest in the $200mg{\cdot}L^{-1}$ $K_2SiO_3$ treatment in both 'Super Olympia Red' and 'Super Olympia Rose'. In both pansy cultivars, fresh weight was the greatest in the $200mg{\cdot}L^{-1}$ $K_2SiO_3$ treatment than other treatments. Chlorophyll content was significantly greater in the $100mg{\cdot}L^{-1}$ $K_2SiO_3$ treatment for both the cultivars of begonia. Leaf area significantly increased with the higher concentrations of $K_2SiO_3$ treatment in both cultivars of pansy. Stomatal structures on the leaf epidermis were observed with scanning electron microscopy (SEM). In begonia 'Super Olympia Rose', the structure of stomata were more compact in size in the $300mg{\cdot}L^{-1}$ $K_2SiO_3$ treatment than in the control. Similarly, in pansy 'Matrix White Blotch' the surface of stomata appeared to be smoother in the $300mg{\cdot}L^{-1}$ $K_2SiO_3$ treatment than those wrinkled appearance in the control. The surface of the leaf epidermis appeared to be compact due to Si deposition, and thus results indicated that Si positively affected the growth and biomass production of these species. Our data show that the effect of Si on growth parameters is strongly dependent on cultivar of the plant species tested.

• The Korean Journal of Mycology
• /
• v.3 no.1
• /
• pp.1-19
• /
• 1975

Since the importance of casing in fruit body formation of Agaricus bisporus has been emphasized, physico-chemical characteristics of casing materials were discussed by many workers and a mixture of peat and mineral soil as proper casing material has been adopted in many of mushroom growing countries. Because of limited resources of peat in Korea, it is necessary to find practical performance and substitutional materials for casing. The effect of casing on mycelial growth and mushroom yield of A. bisporus varied with materials, its combination and practices etc. The experiments to be discussed in this paper are concerned with pH and Ca of casing material which influence A bisporus, and changes of physico-chemical characteristics with mixing ratio of casing materials and its effect on A. bisporus. The optimum range of moisture content of each material, management of watering and application of physico-chemical characteristics casing materials was also investigated and re-use of weathered spent compost for casing material was described. 1. The effect of calcium on mycelial growth of A. bisporus at various pH in Halbschalentest showed different results with calcium sources. Best results were obtained around neutrality and fresh weight of fruit bodies grown in the range of pH 7 to 8 was highest among the tested levels. 2. Available moisture, pore space, organic matter, cation exchangeable capacity and exchangeable cation was increased by an increase of mixing ratio of peat in casing materials, while an adverse effect was obtained by addition of sand. 3. Mycelial growth on clay loam was more rapid at a lower bulk density of 0.75g/cc and at 20% moisture content on a dry weight basis at the same bulk density. 4. Mixing ratio of casing materials, 60 to 80 per cent by volume of peat mixed with 20 to 40 per cent of clay loam produced the highest yield of fresh fruit bodies and sand the lowest. However, per cent of open cap was highest in peat and lowest in sand. 5. Days required for fruit body initiation was shortened in mixtures of peat and clay loam by one to three days compared with other materials and the formation of flushes was clear. 6. The effect of some physico-chemical characteristics of casing materials on the fresh weight of fruit bodies were estimated by a multiple regression equation; Y=-923.86+$8.18X_1+8.04X_2+7.90X_3+0.12X_4+2.03X_5-0.82X_6-0.54X_7$ where $X_1,X_2,X_3,X_4,X_5,X_6,X_7$ are sand, silt, clay, available moistuer, porosity, organic matter and exchangeable cation respectively. The productivity of certain casing material could be predicted from this equation. 7. Fresh weight of fruit bodies was positively correlated with porosity exchangeable cation, organic matter, available moisture, silt and clay of materials; while sand was negatively correlated. On the contrary, sand was the unique factor reducing per cent of open cap. 8. Distribution of three phases of high productive casing material was concentrated in the range of 10 to 30 per cent solids, 15 to 30 per cent liquids, and 50 to 60 per cent in air volume. 9. Fresh weight of fruit bodies from peat was not affected with heavy watering but in clay loam and sandy loam severe crop losses occurred. Fresh weight of individual fruit was increased and open caps were decreased with heavy watering but light watering resulted in adverse effects: its effect was especially great in peat. 10. Optimum range of moisture content by weight on a dry basis was different with each casing material. To maintain optimum moisture content concerned with yield of fruit bodies and open cap, sandy loam and peat mixtures required daily watering of 0.6, 0.6 to 1. 2 and 1.2 to 2.4 liters per $3.3m^2$ of bed area, respectively. 11. Maximum yield of fruit body was recorded in the range of pF 2. 0 to 2. 5 of casing materials if organic matter content was below 4.2 per cent and in pF 1. 3 to 1.8 if above 7.1%. 12. pF curve of a certain casing material could be draws from moisture content at various pF values by multiple regression equations provided texture, organic matter and calcium of the casing material are given. Optimum moisture range of the casing materials also could be estimated by the equation. 13. It was possible to improve the phyico-chemical characteristics of clay loam and sandy loam by addition of weathered spent compost although the effect was less than in the case of peat. Fresh weight of fruit bodies wsa increased by addition of weathered spent compost but its effect was not as remarkable as peat. Accordingly, further studies will be required.

• Korean Journal of Plant Resources
• /
• v.20 no.4
• /
• pp.309-311
• /
• 2007

This study was conducted to select the most suitable fertilizer level on nursery of mat rush for good quality and high yield. $N-P_{2}O_{5}-K_{2}O=60-30-60$ (kg/10a), fertilizer level on nursery of mat rush showed relatively superior values for all yield components and quality with 57g in fresh weight, 12g in dry weight, 23% in air drying ratio for per plant at the nursery and 125cm in stem length, 150 numbers in stem number, 4,082kg/10a in fresh stem yield, 345kg/10a in long stem yield, 996kg/10a in medium stem yield, 1,421kg/l0a in total stem yield, 34% in dry stem ratio and 30% in long stem ratio at the main paddy field. The results indicate that fertilizer level, $N-P_{2}O_{5}-K_{2}O=60-30-60kg/10a$ in nursery shows different adaptabilities to a particular fertilizer level and 60-30-60 (kg/10a) seems to be the most suitable fertilizer level of mat rush for good quality and high yield.

• Korean Journal of Agricultural Science
• /
• v.20 no.2
• /
• pp.117-124
• /
• 1993

This study was conducted to determine the effects of alternating planting systems of soybean and tillering hybrid corn on yield of both crops. The planting systems included monocultures of both crops. 1 to 1 row ratio, 1 to 2 row ratio, 1 to 3 row ratio, 2 to 1 row ratio, 2 to 3 row ratio, 3 to 1 row ratio, 3 to 2 row ratio and 3 to 3 row ratio of soybean and corn. The results obtained are summarized as follows : The plant height of soybean was increased as the number of planting rows of corn increased. But the plant, height of soybean was quite stabilized when the ratio of soybean planting rows increased. When the plant height of soybean was increased due to the increased row number of corn, the branch number and diameter of soybean decreased and lodging ratio increased. Total fresh weight of soybean per 10a was decreased as the ratio of soybean planting decreased and it was increased when the ratio of soybean planting increased over monoculture of soybean. Dry weight of soybean per 10a showed the same tendency of the fresh weight. But the highest grain yield of soybean was obtained in the monoculture of soybean and it was 276 kg/10a. Comparatively high yield of soybean was obtained in the systems of 2 to 1 and 3 to 3 ratios. The plant height, number of tillers and number of ears per plant of tillering corn were greatly affected by the alternating planting of soybean and they were 208.9cm, 2.1 and 4 per plant, respectively. The fresh and dry weights and yield of corn per 10a showed significant differences among systems. The average fresh and dry weight of corn in the systems of 3 to 1 and 2 to 1 were 1000 kg and 100 kg higher than those of monoculture of corn. The kernel yields of corn per 10a were 438 kg in the monoculture system and 530 kg in the systems of 3 to 2 and 2 to 1. The total fresh weights of corn and soybean in systems of 3 to 1, 3 to 2 and 2 to 1 were higher than 5721 kg of soybean and 4358 kg of corn in the monoculture. Combined dry weight was high in the order of monoculture, 2 to 1 and 3 to 1 row ratios. Combined grain yield was high in the systems of 2 to 1 and 3 to 1 row ratios and it was over 430 kg per 10a.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.5
• /
• pp.394-406
• /
• 2004

A split-plot designed experiment including four rice varieties and 10 nitrogen levels was conducted in 2003 at the Experimental Farm of Seoul National University, Suwon, Korea. Before heading, hyperspectral canopy reflectance (300-1100nm with 1.55nm step) and nine crop variables such as shoot fresh weight (SFW), leaf area index, leaf dry weight, shoot dry weight, leaf N concentration, shoot N concentration, leaf N density, shoot N density and N nutrition index were measured at 54 and 72 days after transplanting. Grain yield, total number of spikelets, number of filled spikelets and 1000-grain weight were measured at harvest. 14,635 narrow-band NDVIs as combinations of reflectances at wavelength ${\lambda}l\;and\;{\lambda}2$ were correlated to the nine crop variables. One NDVI with the highest correlation coefficient with a given crop variable was selected as the NDVI of the best fit for this crop variable. As expected, models to predict crop variables before heading using the NDVI of the best fit had higher $r^2$ (>10\%)$ than those using common broad- band NDVI red or NDVI green. The models with the narrow-band NDVI of the best fit overcame broad- band NDVI saturation at high LAI values as frequently reported. Models using NDVIs of the best fit at booting showed higher predictive capacity for yield and yield component than models using crop variables.

• Journal of Environmental Science International
• /
• v.24 no.6
• /
• pp.755-762
• /
• 2015

The present study was conducted to develop seed treatment for the production of healthy and clean peanut sprout. Dry heat treatment of peanut seeds reduced the incidence of the rot. The seed treatment condition at $52^{\circ}C$ for 10 h. was the most efficient without inhibiting seed viability significantly. Seeds were dark cultured at $27^{\circ}C$ for up to 9 days. The treatment of Indole-B and gibberellic acid influenced germination, T50, fresh, dry weight, hypocotyl length, hypocotyl length diameter, root length, number of lateral root and epicotyl of peanut sprout. There were no differences in the germinability of peanut seeds between gibberellic acid treatment methods but higher fresh weight was observed in the GA3 solution spray after 2 hour water soaking. The general growth and lateral root development of peanut sprouts were suppressed by Indole-B which is used for inhibiting root formation and promoting hypocotyls. The treatment of gibberellic acid promoted hypocotyl elongation, but it did not influence on the growth of hypocotyls and root system.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.1
• /
• pp.27-36
• /
• 2017

In order to determine the relationship between water content and flower qualities of oriental hybrid lily cv. 'Siberia' cut flower, flowers were subjected to dry and cold storage at $5^{\circ}C$ for 3, 6, and 12 days and subsequently exposed to ambient temperature ($26^{\circ}C$) in bottles with water for up to 16 days. Flowers stored at $22^{\circ}C$ in dry condition for 3 days were used as the control. Changes in fresh weight, moisture content, water balance, flowering stages, osmolality and vase life of cut flowers were observed. Flowers treated with cold and dry storage had higher moisture content compared to control sample. However, this trend was evident only for 3-day cold and dry stored sample during the whole storage period. The fresh weight of cut flowers increased gradually when the samples were transferred to ambient temperature in water bottles and then declined steadily before reaching the peak in between 6-8 days of vase life. However, the changes of fresh weight of control sample were substantially faster than samples pre-treated with cold and dry storage. This was also correlated with the water balance of cut flower as it reached the minus (-) value in 6-8 days of vase life at ambient temperature. Cut lily flowers showed high osmolality values corresponding with the duration of dry storage regardless of low or higher temperature. However, osmolality had no effect on vase life since flower stem absorbed water rapidly at the end of dry storage period. Our vase life results suggest that cold and dry storage of lily cut flowers for a certain period could ensure longer vase life at ambient temperature. It was observed that prolonging the storage period at cold and dry condition for more than a week significantly increased bud abortion, reduced longevity of flowers and reduced the vase life of cut flowers. On the other hand, the shorter cold and dry storage treatment delayed the bud opening and senescence of the flowers, thus, slowering the normal maturation and aging. Results indicated that dry and cold storage at $5^{\circ}C$ for 3 days was effective in maintaining and preserving overall quality and vase life at ambient condition of oriental hybrid lily cut flowers.