• 한국항만학회지
• /
• 제9권1호
• /
• pp.45-56
• /
• 1995

Investigation of the physical behavior of dredged material disposal in coastal water includes estimations of water column concentration in the receiving water, exposure time, the initial deposition pattern as well as thickness of material at the dumping fields near the estuary area. Calculation based on vertical setting and horizontal advection of single particles ignore the effects of bulk properties of the disposed material, vertical and horizontal diffusion, and material dilution due to the entrainment of ambient water during descent. This paper focuses on the spatial and temporal changes in the dumping fields for the water column and bottom at a hypothetically confined coastal water, where the ambient time-invariant velocity and density profiles are applied, within the initial time period following the instantaneous release of the dredged material. This model accounts the behavior of material after release divided into three phases: convective descent, dynamic collapse and long-term passive dispersion

• 한국지반환경공학회 논문집
• /
• 제2권2호
• /
• pp.5-12
• /
• 2001

항로유지 및 오염해역준설로 인하여 항만에서 발생하는 준설토를 재활용하는 방안 연구의 일환으로 준설토의 물리적인 특성 및 오염도 특성 분석을 수행했다. 대상 항만은 군산항, 고현항, 삼천포항, 포항항이었으며, 유지준설토를 현지에서 채취하여 용출실험에 이용했다. 실내실험결과, 준설토의 비중은 큰 차이를 보이지 않았으며, 입도분포는 군산항, 삼천포항, 고현항은 실트질 및 굴패각 성분이 대부분이고, 포항항의 경우는 자갈성분이 많은 것으로 파악되었다. 한편, 군산항 준설토는 금강유역에서 배출되는 오염부하의 영향으로 COD 용출농도 및 강열감량이 크게 나타났으며, 영양염류 용출농도도 타 항만에 비하여 큰 값을 보이고 있다. 중금속 용출농도는 Zn, Pb, Cd, Cu 항목에 대하여 각각 고현항, 군산항, 삼천포항, 군산항이 가장 큰 값을 보이고 있어 항목별로 오염도가 다양한 양상을 보이고 있다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.3-12
• /
• 2010

Vertical drains have been commonly used to increase the rate of the consolidation of dredged material. The installation of vertical drains additionally provides a radial flow path in the dredged foundation. The objective of this study develops a numerical model for 2-D axisymmetric non-linear finite strain consolidation considering self-weight consolidation to predict the effect of vertical drain in dredged foundation which is in process of self-weight consolidation. The non-linear relationship between the void ratio and effective stress and permeability during consolidation are taken into account in the numerical model. The results of the numerical analysis are compared with that of the self-weight consolidation test in which an artificial vertical drain is installed. In addition, the numerical model developed in this paper is the simplified analytical method proposed by Ahn et, al (2010). The comparisons show that the developed numerical model can properly simulate the consolidation of the dredged material with the vertical drains installed.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
• /
• pp.54-57
• /
• 2002

Pretreatment technologies are defined as technologies that prepare or condition dredged material for subsequent, more rigorous treatment processes. The objectives of this study are to test the feasibility of treating dredged sediment using pretreatment process(hydrocyclone, sedimentation basin, and flotation), and to estimate design parameters for a pilot-plant design. The final goal of the project is to recycle the dredged sediment that is otherwise reused as construction materials.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1992년도 가을학술발표회 논문집
• /
• pp.61-64
• /
• 1992

Recently, by the lack of fill material, the dredg and fill(hydraulic fill) method is commonly used in reclamation projects. Hydraulic fill method dredges the soil and send it with water through the transportation pipe to the site. The intial state of the hydraulic fill material is accordingly the mixture of water and soil skeleton which settles with time forming a new soil layer. The properties of new soil layer is governed the size of the soil skeleton, the flow velocity of mixing water, salt concentration, the distance from the discharge pipe outlet, and other dredging conditions when settling process occur. In this study, the effects of gradation of derdged soil on the deposition properties (with emphasis on the optimum spacing of the discharge pipes) was investigated by field test. It was found that the soft fine graind soil was forme at 350m from the discharge pipe outlet when the dredged material was classified as CL, while the soft fine grained soil was not formed even at the distance farther than 400m from the diacharge pipe outlet when the dredged material was classified as SM.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.499-506
• /
• 2004

The use of dredged soft marine clay is increasing due to a shortage of coarse material available. This paper presents a stabilization method that can increase shear strength of the surface layer of a dredged clay deposit at dates much earlier than usual. The desiccation of the upper soft 1-2m layer can be accelerated by interrupting water seeping from its bottom with impervious geotextile. Just below the geotextile, enough pervious material is provided so that the underlying deposit can be drained through it. This scheme is proved to be effective through theoretical analysis.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.591-596
• /
• 2001

The purpose of this paper Is to present and discuss some of evaporation and desiccation observed in laboratory experiments under controlled conditions, and is to improve PTM(Progressive Trenching Method) operating technique. PTM is the technically feasible and economically justifiable dewatering and desiccation technique for dredged material containment areas. A series of laboratory experiments with large model test were carried out to get evaporation rate and strength increase. Surface desiccation of dredged material is basically changed by evaporation characteristics which is controlled by weather and trench type, etc. This study shows that trench depth and rain fall are important factors in desiccation of dredged soft clay.

• 한국재난정보학회 논문집
• /
• 제7권4호
• /
• pp.247-258
• /
• 2011

본 연구에서는 국내 육상 및 해상 준설토 활용관련 환경기준과 처리공법을 총 망라해 고찰해 보았다. 해양준설토 활용방법 제시를 위하여 고화벽돌 및 경량벽돌 등 시제품을 제작하였으며 매립복토재로서 활용성도 매립작업을 원할히 하기위한 강도(대략 50kPa)를 만족하였다.

• 한국연안방재학회지
• /
• 제5권4호
• /
• pp.173-182
• /
• 2018

As the research about increasing the efficiency of dredging soil transport, the technology, which reduce the friction between pipe wall and fluid in the pipe and disturbed generating pipe blockage, has been developed. So for the purpose of applying this technology to real construction site, main test has been tried at the real scale test in field. As a test result, this paper will show 30% flow efficiency increasing by permitted electro magnetic force to the pipe. And test result was evaluated as a ultra sonic velocity profiler. To propose the design technique and the execution manual of the high efficiency dredging material transport technic, this research have confirmed flow status changing depending on a soil material kind under electro-magnetic field and analyze the effect of electro-magnetic field which affects to each dredged soil material transportation. For achieving this research, EMF(Electro-Magnetic Field) generator is installed on the dredger(20,000HP) and through monitored flow status, dredging soil flow rate and sampled material specification is confirmed. Also dredger operating condition is measured and dredger power for soil transportation, hydraulic gradient and flow rate are compared, as transportation efficiency is calculated by this parameter, it is possible to check transportation efficiency improvement depending on each dredged soil material under electro-magnetic field. To verify the technique of dredged soil transfer using electromagnetic field, which is the core technique of the high efficiency dredged soil transfer, and the technique of expert system for pipeline transfer and the flow state. This could lead to a verification of transfer efficiency according to the characteristics of the dredged soil (sand, clay, silt) and the transfer distance (5km, 10km, 15km), which is planned to be used for a technology development of pump power reduction and long-distance transfer applying the high efficiency dredged soil transfer technology.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2012년도 춘계학술대회
• /
• pp.383-385
• /
• 2012

유럽 및 일본에서 건설되고 있는 폐쇄처분장(CDF)은 오염 준설물의 처분을 위해 세계적으로 널리 사용되는 방법으로 주변 환경과 생태계에 미치는 영향을 최소화하면서 오염 준설물을 차단하기 위한 시설이다. 폐쇄처분장의 개념은 간단하지만 이를 건설하는 것은 쉬운 것이 아니다. 폐쇄처분장(CDF) 시설을 계획하는 과정에서 토목공학, 조경, 화학, 입법, 사회적 영향, 환경공학과 같은 다양한 분야에 대한 전문지식과 기술이 고려되어야 한다. 본 고에서는 CDF의 일반적인 지침에 대해 간략히 소개하였다.