• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.917-923
• /
• 2002

KITECH and ODS performed a study of internal and external noise prediction of the KHST test train. The object of this study was 3 kind of cars; trailer car(TT2), motorized car(TM1) and power car(TP1) and the predicted noise was calculated for the two different driving speeds in free field and tunnel conditions. Data of carbody design and noise sources were delivered from each manufactures. Some of noise sources which were not available in project team, were chosen by experiences of ODS. Internal noise level of each car were predicted for two cases i.e, at 300 km/h and 350 km/h. In addition sound transmission path and dominant noise sources were also investigated of each section of car, which is circular shell typed part of whole carbody. In case of TT2, the dominating sound transmission path is floor in terms or structure-borne noise and air-borne noise. The main noise sources are structure-borne noise from the yaw-damper and air-borne noise from the wheel/rail contact, whereas the dominating sound transmission path of TM1 are floor and sidewall below the window in terms of structure-borne noise. The main noise sources of TM1 are structure-borne noise from motor/gear unit and the yaw-damper in the free field, and air-borne noise from the wheel/rail contact and structure-borne noise from motor/gear unit in the tunnel. Through the external noise prediction for the KHST test train formation, the noise form the wheel/rail contact is estimated as one of the major sources. In addition, the noise specification of sub-component was proposed for managing each sub-surpplier to reach the KHST noise requirement. The specification provide the sound power of machinery part and transmission loss of component of carbody structure. The predicted noise level in each case exceeded the required limit. Through this study, the noise characteristics of the test train were investigated by simulation, and then the actual test will be performed in near future. Both measured and calculated data will be compared and further work for noise reduction will be continued.

• Journal of The Korean Astronomical Society
• /
• v.46 no.3
• /
• pp.125-131
• /
• 2013

We present the relation between the genus in cosmology and the Betti numbers for excursion sets of three- and two-dimensional smooth Gaussian random fields, and numerically investigate the Betti numbers as a function of threshold level. Betti numbers are topological invariants of figures that can be used to distinguish topological spaces. In the case of the excursion sets of a three-dimensional field there are three possibly non-zero Betti numbers; ${\beta}_0$ is the number of connected regions, ${\beta}_1$ is the number of circular holes (i.e., complement of solid tori), and ${\beta}_2$ is the number of three-dimensional voids (i.e., complement of three-dimensional excursion regions). Their sum with alternating signs is the genus of the surface of excursion regions. It is found that each Betti number has a dominant contribution to the genus in a specific threshold range. ${\beta}_0$ dominates the high-threshold part of the genus curve measuring the abundance of high density regions (clusters). ${\beta}_1$ dominates the genus near the median thresholds which measures the topology of negatively curved iso-density surfaces, and ${\beta}_2$ corresponds to the low-threshold part measuring the void abundance. We average the Betti number curves (the Betti numbers as a function of the threshold level) over many realizations of Gaussian fields and find that both the amplitude and shape of the Betti number curves depend on the slope of the power spectrum n in such a way that their shape becomes broader and their amplitude drops less steeply than the genus as n decreases. This behaviour contrasts with the fact that the shape of the genus curve is fixed for all Gaussian fields regardless of the power spectrum. Even though the Gaussian Betti number curves should be calculated for each given power spectrum, we propose to use the Betti numbers for better specification of the topology of large scale structures in the universe.

• Korean Journal of Plant Taxonomy
• /
• v.40 no.3
• /
• pp.135-144
• /
• 2010

This study intended to investigate environmental factors including soil and vegetation in order to understand the environmental and ecological characteristics of four different habitats of Abelia tyaihyoni. These habitats, according to investigations, are mostly located at elevations of 203 m to 297 m with angles of inclination ranging from 9 degrees to 17 degrees. The litter depth of habitats is 2 cm to 5 cm. A total of 113 vascular plant taxa are identified in seven quadrates of the four habitats. The life form of 113 species is H-$D_4$-$R_5$-e type. The importance value of Abelia tyaihyoni is 39.61%, and 4 highly ranked species such as Quercus dentata (6.27%), Spiraea blumei, Spiraea prunifolia for. simpliciflora (4.04%) and Ulmus davidiana var. japonica (3.84%) are considered to be an affinity with Abelia tyaihyoni in their habitats. The dominant species of woody plants in the four habitats are represented as Pinus densiflora (21.22%) and Quercus dentata (16.82%) in the subtree layer (T2), and Carex humilis var. nana (18.95%) and Carex lanceolata (17.63%) in the herbaceous layer (H). The degree of their average species diversity is 1.42, and that of dominance and evenness are 0.07 and 0.86, respectively. The type of soil is sandy loam, clay loam and loam, and the average field capacity of soil is 22.49%. Their average organic matter is 9.39%, soil pH 6.75, and available phosphorus is $1.23 {\mu}g/g$.

• Journal of fish pathology
• /
• v.34 no.1
• /
• pp.39-46
• /
• 2021

Tetracycline (TC) is one of the antibiotics used for treatment of bacterial infection in Korea. Inadequate usage and abuse cause the resistance to antibiotics, like Tetracycline, Erythromycin, and Fluoroquinolone. It can also affect severe economic loss in aquaculture field in Korea. We isolated 101 bacterial samples from diseased fish at aquaculture sites in Gyeonggi-do during 2015~2018. Minimum inhibitory concentration (MIC) method has been used to determine distribution and to identify bacterial isolates resistant to antibiotics including Oxytetracycline (OTC), Ampicillin (AMP), Clindamycin (CLI), Enrofloxacin (ENRO), Gentamycin (GEN). TC resistant isolates were confirmed antibiotic resistant genes by conventional PCR. Bacterial isolates were identified as Aeromonas spp. (43.5%), Pseudomonas spp. (4.0%) and Vibrio spp. (5.0%). It was confirmed that multi-resistant isolates (77.2%) were predominant over single-resistant one (22.8%). TC resistant genes like tet(A), tet(D), tet(E), tet(G), tet(M), and tet(S) were detected and tet(A) was the most prevalent. Aeromonas spp. is a dominant strain in bacterial infections in fishes of aquaculture sites, and further investigation on various antibiotic resistance genes will be needed for clear understanding of aquaculture sites in Gyeonggi-do.

• Korean Journal of Weed Science
• /
• v.12 no.4
• /
• pp.317-334
• /
• 1992

Weed flora and floristic composition were reviewed in lowland rice field and upland crop area. For lowland rice field weed flora was not much changed since 1971. About 29 weed species belonged to 18 families were occurred. However, floristic composition of dominant weed species has greatly changed mainly due to introduction of herbicides. The predominant weed species in 1971 when herbicide was not used were Rotala indica, Eleocharis acicularis, Monochoria vaginalis, Echinochloa crus-galli, while these for in 1991 were Eleocharis kuroguwai, Sagittaria pygmaea, S. trifolia, Echinochloa crus-galli and M, vaginalis, respectively. In 1981 weed survey, E. crus-galli was no longer troblesome weed. However, this species became important again thereafter by introduction of herbicide mixtures with pyrazolate, bensulfuron-methyl or pyrazosulfuronethyl. For upland crop area, 216 weed species belonged to 46 families were recorded. One hundred and sixtyfive of these were grown in winter crop area while 189 weed species occurred in summer crop area, respectively. Among these, 138 weed species were grown in both crop seasons. In general, summer crops had less number of weed species compared to winter crops. Even though the dominant weed species varied by crop the most common weeds were Chenopodium album, Alopecunrs aqualis, Stellaria alsine and S, media for winter crops and Digitaria sanguinalis, Portulaca oleracea, Chenopodium album and Acalypha australis for summer crops, respectively.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.2
• /
• pp.75-103
• /
• 2014

The Quaternary faults are extensively observed along major inherited fault zones (i.e. Yangsan Fault System, Ulsan Fault, Yeonil Tectonic Line, Ocheon Fault System) in SE Korea. Their geometry and kinematics provide a very useful piece of information about the Quaternary crustal deformation and stress field in and around Korean Peninsula. Using magnetic fabrics (AMS), we attempted to determine the slip senses of Jinti, Mohwa, Suseongji2, and Wangsan faults and then interpreted the fabric development process of fault gouge and the characteristics of stress field during the Quaternary. All the magnetic fabrics of the faults, except the Wangsan Fault, consistently indicate a dominant reverse-slip sense with weak strike-slip component. Most of the oblate fabrics are nearly parallel to the fault surface and the anisotropy degrees generally increase in proportion to the oblatenesses. These results suggest that the fabrics of the fault gouges resulted from a progressive deformation due to continuous simple shear during the last reactivation stage as reverse faulting. It is also interpreted that the pre-existing fabrics were overwhelmed and obliterated by the re-activated faulting. Paleostress field calculated from the fault slip data indicates an ENE-WNW compressive stress, which is in accord with those determined from previous fault tectonic analysis, focal mechanism solution, and hydraulic fracturing test in and around Korean Peninsula.

• Korean Journal of Weed Science
• /
• v.31 no.3
• /
• pp.279-288
• /
• 2011

To suggest the weed management technique for environment friendly rice cultivation, we investigated occurrence patterns of weeds, the actual condition of weed management, and rice yield at the environment friendly agricultural complex located in Honam and Chungnam regions. The practical performance of weed management was relatively satisfactory in decreasing order of agricultural technique with golden-apple-snail (GAS) > agricultural technique with duck (Duck) > agricultural technique with rice bran (RB) > agricultural technique with soft-shelled turtle (ST). In the rice fields employed by agricultural technique with GAS, the dominant weeds were Echinochloa crus-galli, Ludwigia prostrata, Monochoria vaginalis, Sagittaria trifolia, and Aneilema keisak. However, E. crus-galli, M. vaginalis, L. prostrata, Aeschynomene indica and Bidens frondosa were found as dominant weeds at the fields using the Duck and E. crus-galli, M. vaginalis, L. prostrata, Polyganum hydropiper and Eleocharis kuroguwai at the fields using RB. In comparison of rice yield ($5.2\;MT\;ha^{-1}$) obtained from the conventional cultivation using herbicides, about 93% was reached by Duck, about 91% by GAS, about 92% by RB, and about 78% by ST. When rice qualities obtained from environment friendly rice cultivation were compared with those from the conventional cultivation, the producing rates of perfect kernel, immature kernel, immature opaque kernel, cracked rice, and damaged kernel were lower in the former cultivation, whereas contents of protein, amylose, and fatty acid were similar in the two cultivation methods. The problems found in the environment friendly agriculture were poor plowing and harrowing, carless irrigation management, and geological poor condition as cultivation area with cold water. These have caused severe infestation of weeds, frequent incident of disease and insect pest, and rice lodging. This resulted in reduction of rice yield as high as about 32 to 79% as compared with the conventional cultivation using herbicides.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.3
• /
• pp.83-94
• /
• 2013

The purpose of this study is to offer basic data about prototype conservation of the Orijangnim, natural monument No. 404. For this study, March to August 2010, was a literature surveys and field research, and based on this, the Delphi survey of local residents and experts meeting were diagnosed with forest back ground, spatial extent, in the form of forests, flora and vegetation of the surrounding area, so examined closely the original form. Range of the Orijangnim was presumed from Jacheon middle school entrance($N36^{\circ}05^{\prime}59.9^{{\prime}{\prime}}/E128^{\circ}54^{\prime}32.9^{{\prime}{\prime}}$) to Odong of Hwabukmyeon village entrance($N36^{\circ}05^{\prime}31.0^{{\prime}{\prime}}/E128^{\circ}54^{\prime}32.5^{{\prime}{\prime}}$). The Orijangnim in the original form of the existing forest surrounding the village along gohyeon river going back a long S-shaped about 2km is considered. The investigated vascular plants consist of total 198 taxa : 2 forms, 20 varieties, 179 species, 152 Genera, 72 Families. Most of the 60 kinds of large land plants lots of whole plants accounted for 33.3%. A main vegetation of the Orijangnim have been distributed 473 objects of 21 species, and evergreen conifers is 19% to 92 objects, on the other hand, deciduous broadleaf tree is 79% to 373 objects, so the Orijangnim can be maxed forest that deciduous broadleaf tree is dominant. When consider the composition purpose of forest, environment of location, tree size, surrounding flora and vegetation, because an original vegetation of Orijangnim is suggested Zelkova serrata, Salix glandulosa, Celtis sinensis Pers., Quercus variabilis, Quercus acutissima , Sophora japonica L., Cornus walteri Wanger. we must restore around such species of tree. Cedrus deodara (Roxb.) Loudon, Chaenomeles sinensis, Prunus yedoensis Matsum., Ginkgo biloba , Pinus thunbergii Parl., Populus tomentiglandulosa T. Lee is considered to have been planted in the last.

• Journal of the Korean Vacuum Society
• /
• v.6 no.4
• /
• pp.348-353
• /
• 1997

Hydrogenated amorphous carbon(a-C:H) films were deposited on p-type Si(100) by DC saddle-field plasma enhanced CVD to investigate the effect of substrate bias on optical properties and structural changes. They were deposited using pure methane gas at a wide range of substrate bias at room temperature and 90 mtorr. The substrate bias voltage ($V_s$) was employed from $V_s=0 V$ to $V_s=400 V$. The information of optical properties was investigated by photoluminescence and transmitance. Chemical bondings of a-C:H have been explored from FT-IR and Raman spectroscopy. The thickness and relative hydrogen content of the films were measured by Rutherford backscattering spectroscopy (RBS) and elastic recoil detection (ERD) technigue. The growth rate of a-C:H film was decreased with the increase of $V_s$, but the hydrogen content of the film was increased with the increase of $V_s$. The a-C:H films deposited at the lowest $V_s$ contain the smallest amount of hydrogen with most of C-H bonds in the of $CH_2$ configuration, whereas the films produced at higher $V_s$ reveal dominant the $CH_3$ bonding structure. The emission of white photoluminescence from the films were observed even with naked eyes at room temperature and the PL intensity of the film has the maximum value at $V_s$=200 V. With $V_s$ lower than 200 V, the PL intensity of the film increased with V, but for V, higher than 200 V, the PL intensity decreased with the increase of $V_s$. The peak energy of the PL spectra slightly shifted to the higher energy with the increase of $V_s$. The optical bandgap of the film, determined by optical transmittance, was increased from 1.5 eV at $V_s$=0V to 2.3 eV at $V_s$=400 V. But there were no obvious relations between the PL peak and the optical gap which were measured by Tauc process.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.2 no.3
• /
• pp.37-45
• /
• 2000

In recent years two reflection methods, i.e. GPR and seismic Impact-Echo, are usually performed to obtain the information about tunnel lining structures composed of concrete lining, shotcrete, water barrier, and voids at the back of lining. However, they do not lead to a desirable resolution sufficient for the inspection of tunnel safety, due to many problems of interest including primarily (1) inner thin layers of lining structure itself in comparison with the wavelength of source wavelets, (2) dominant unwanted surface wave arrivals, (3) inadequate measuring strategy. In this sense, seismic physical modeling is a useful tool, with the use of the full information about the known physical model, to handle such problems, especially to study problems of wave propagation in such fine structures that are not amenable to theory and field works as well. Thus, this paper deals with various results of seismic physical modeling to enable to show a possibility of detecting the inner layer boundaries of tunnel lining structures. To this end, a physical model analogous to a lining structure was built up, measured and processed in the same way as performed in regular reflection surveys. The evaluated seismic section gives a clear picture of the lining structure, that will open up more consistent direction of research into the development of an efficient measuring and processing technology.