• Journal of Auto-vehicle Safety Association
• /
• v.11 no.2
• /
• pp.6-10
• /
• 2019

This paper describes effectiveness of accident reduction on vehicles equipped with AEB using accident data occurring in Korea. During the statistical period, we used the number of vehicles which are covered by auto insurance and the number of accidents. To maximize the reduction effect of accidents caused by the driver's carelessness, the analysis was limited to Physical Damage Coverage that covers the cost of repairing or replacing the damaged vehicle caused by the driver's fault. Due to Personal Information Protection Law, it was not capable of comparing the same vehicle using Vehicle Identification Number in this study. Instead of that, we used it as a similar vehicle, so there are limits to the comparison and analysis results. As a result of this study, we have found that the effect of reducing accidents was different depending on the vehicle class, but it was generally concluded that the number of accidents decreased when the vehicle was equipped with an AEB system. Domestic research on the AEB effect of reducing accidents is not active yet. Therefore, it is absolutely essential to analyze the effects according to various conditions such as driver's age, occupation and gender as well as expanding the study models in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.121-126
• /
• 2019

Despite the trend of decreasing accidents, falling accidents in the construction industry have not decreased and are even rising. Most major accidents are falling accidents caused by hanging scaffolding and are mostly serious. We conducted a review of the literature, institutions, and regulations, which showed that domestic standards are not unified because they are drawn up by referring to overseas standards for hanging scaffolding. New regulations or standards should be established, which should reflect the safety plans for equipment, work advance plans, education, and management. If facility improvement plan for Hanging Scaffolding and implementation of revision of the current work use, regulations and guides are implemented, it will be recognized in advance of the causes of the accident statistics and the classification system and will be the basis for the implementation of joint efforts by workers, managers, supervisors and owners to reduce accidents.

• Journal of the Korean Society of Safety
• /
• v.36 no.2
• /
• pp.58-67
• /
• 2021

Incident investigation is regarded as a means to improve safety performance. For the prevention of industrial accidents, measures such as providing safety education, enhancing management interest and participation, establishing a safety management system, and conducting inspection of the work site are necessary. In particular, accident investigation activities, which are an important element of safety management, help to prevent similar accidents, thereby minimizing damage and enhancing work safety. They are critical for understanding business-related incidents and the vulnerabilities and opportunities associated with them. Therefore, it is clear that accident investigation activities are important for accident prevention. The primary focus of many incident investigation processes is on identifying the cause of an event. While considerable research has been conducted on potential accident investigation tools there has been little research on including the views and experiences of practitioners in the accident investigation process. In this study, a questionnaire survey was conducted among safety managers in the domestic manufacturing/construction industry to understand the practice of accident investigation. The investigation pertained to companies' accident investigation systems, the competence of investigators, and the identification and recommendations of the cause of accidents. From the analysis results of accident investigations, investigators' competence, the difficulty level of investigations, and the root causes of accidents were identified from the viewpoint of the participants of the accident investigations. In particular, the development of standardized and simple accident investigation methods and their dissemination to companies were found to be necessary for activating the root cause of accidents. Based on this, it can be used as basic data for the development of root cause analysis investigation techniques that are easily applicable to organizations.

• Journal of the Korean Society of Safety
• /
• v.37 no.2
• /
• pp.10-17
• /
• 2022

Currently, in Korea, lower and upper tier qualifying quantities of the 97 substances requiring preparation for accidents have been designated. The information on the submission of chemical accident prevention management plan varies depending on whether the handling volume is above or below the lower or upper qualifying quantity. Because the criteria of the lower and upper qualifying quantities of substance requiring preparation for accidents are not stipulated in the Chemical Substances Control Act, this study attempted to establish a criterion through significance verification. In addition, the study investigated whether these qualifying quantities are related to the Globally Harmonized System of Classification and Labelling of Chemicals (GHS), toxic concentration endpoint, and National Fire Protection Association (NFPA). Finally, by comparing the risk categorization of the GHS, endpoint, and NFPA, it was evaluated whether the circulation-volume-based risk categorization of the substance requiring preparation for accidents that are in the top 13 is appropriate. The qualifying quantities of benzene, toluene, and sulfuric acid needed to be adjusted upward, while those of methyl alcohol and ammonia were adjusted downward from the current qualifying quantities. It is required to establish a quantified criterion that fully reflects the domestic situations in Korea and various indicators such as toxicity, physicochemical properties, and circulation volume for the qualified criterion of hazardous chemical substances. The study is expected to be helpful in establishing an efficient system by systematizing the criterion for qualifying quantity.

• Journal of the Korean Institute of Gas
• /
• v.28 no.1
• /
• pp.35-43
• /
• 2024

With continuous advancements in industry, science, and technology, there is a steady increase in the number and utilization of new chemicals. The growing societal emphasis on chemical safety management is paralleled by an increasing public demand for robust safety measures. While various ministries at the government level oversee the safety management of chemical substances, the occurrence of accidents related to chemical substances remains frequent each year due to problems such as aging facilities and careless handling. Upon analyzing domestic chemical accident cases, incidents occurred predominantly in the sequence of leakage, explosion, fire, and others. The main causes of these accidents were examined, revealing facility defects and non-compliance with safety management as the primary contributing factors. In this study, Hazard and Operability Analysis (HAZOP) was employed to identify hazardous risk factors associated with the handling of hydrofluoric acid in workplaces, and a risk assessment was performed using Bow-Tie method. Based on the results of this study, it is expected to enhance safety management plans aimed at preventing chemical accidents in workplaces dealing with similar facilities. Ultimately, these insights contribute to the development of an advanced chemical safety management system, capable of proactively preventing potential chemical accidents.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.4
• /
• pp.63-72
• /
• 2013

Recent trends in rail industry can be characterized by the multifunctionality and very high-speed modes of operations. In particular, the adoption of the unmaned or operatorless operations has been getting increased attention in which case ensuring systems safety is crucial. On the other hand, according to the result of analyzing rail accidents, the human/operator errors have turned out to be one of the key causes of the accidents. Therefore, the effort of improving the work environment of locomotive cabs is quite necessary in order to decrease the accidents. The objective of this paper is studying on how to incorporate the factors related to the train operators in the design of the locomotive cabs and also on how to evaluate the design results obtained, which is subsequently reflected in the generation of the test and evaluation procedure. The approach taken is based on systems engineering, yielding the procedure document as a result. The results obtained in the paper can be useful in confirming the design of locomotive cabs utilizing the domestic human/operator measure. Also, the way of achieving the objectives can be utilized to cover the expanded rail systems development with appropriate design activities added.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.4
• /
• pp.159-165
• /
• 2013

One of the leading causes of night time automobile accidents is the darkness of surroundings. Headlamps play a critical role in casting light and providing drivers with visibility. Headlamp design and new technology have been developed recently as research has been actively carried out to increase headlamp recognition. This study statistically analyzes irradiation distance using computer simulation by categorizing headlamps applied in domestic automobiles in the last decade by year, light source, form, vehicle type, and height of installation. After analyzing results of irradiation distance, it appears irradiation distance has been increased by approximately 10m in the last decade. This increase in irradiation distance is predicted to decrease night time accidents by allowing more time to recognize potential causes of accidents.

• Journal of the Korean Society of Safety
• /
• v.24 no.5
• /
• pp.69-76
• /
• 2009

The estimation of costs from industrial accidents is very important because they have a serious effect on individuals, companies, and nation. The department of labor estimates the cost of accidents by using the "Heinrich" method. From that method, the scale of accident cost can be approximately computed, but accurate calculation of uninsured cost is not easy. Therefore, a better method of calculating uninsured cost caused by industrial accident is necessary. This study aimed to construct an estimation method of uninsured cost according to domestic circumstances. The results of this study are as follows: (1) This study derived applicable factors for quantitative estimation of industrial accident cost (2) This study made the equation that the calculation of each item of uninsured cost was possible (3) This study applied the uninsured cost by degrees of disaster to individual items (4) The subjects and types of occurrence in uninsured cost were analyzed and presented. Theses results will provide a basis for further researchers of uninsured cost.

• Journal of the Korean Society of Safety
• /
• v.24 no.3
• /
• pp.79-87
• /
• 2009

The objective of this study is to develop accident scenario models for the risk assessment of railway casualty accidents. To develop these scenario models, hazardous events and hazardous factors were identified by gathering various accident reports and information. Then, the accident scenario models were built up. Each accident scenario model consists of an occurrence scenario model and a progress scenario model. The occurrence scenario refers to the occurrence process of the event before the hazardous event. The progress scenario means the progress process of the event after the hazardous event. To manage a large amount of accident/incident data and scenarios, a railway accident analysis information system was developed using railway accident scenario models. To test the feasibility of the developed scenario models, more than 800 domestic railway casualty accidents that occurred in 2004 and 2005 were investigated and quantitative and qualitative analyses were performed using the developed information system.

• Journal of the military operations research society of Korea
• /
• v.24 no.1
• /
• pp.41-57
• /
• 1998

Since the aircraft has a property of moving in the three-dimensional space, it may cause personally and financially critical damage in the case of an accident. Among the causes of aircraft accident, human factor has occupied about 70% of all accidents. Specially, fatigue among human's problems has been studied earlier than any other factor. Fatigue has been the cause of 75% of accidents that are related to human factor. So many studies have been conducted. But the direction of these studies mainly attach importance to the sleep loss and circadian rhythm. Limitation for flight time of ICAO is 8 hours per day, civil airlines in domestic line also adopt the limitation. But this rule is not based on human's performance but compromise between labor and management. The long-haul flight brings about a mental block to pilot. This mental block decreases performance of pilot and loses a lot of important information. So this may cause many accidents. This paper is to offer optimal flight time according to the amount of fatigue due to increasing flight time. The optimal flight time is searched through the field experiment. The experiment has adopted two methods. One is to examine pilot's objective fatigue accumulation rate through the critical fusion frequency, and another is to investigate pilot's subjective fatigue feeling through the fatigue subjective symptoms investigation table.