• Applied Biological Chemistry
• /
• v.39 no.5
• /
• pp.368-373
• /
• 1996

Korean general medicinal herbs-sasam, gilkyung, jakyak, danggwi, hwangki, and chunkung-were added In the normal brewing procedure as a raw material or in the distilling procedure as a packing material. The distillates from the former procedure and those from the latter procedure were compared in quality and distillation properties. As distillation proceeded, pH of the medicinal herb wine distillate and the control(not added herbs) distillates were decreased, whereas that of the herb packing distillate was increased slowely of $0.05{\sim}0.97$ during $1{\sim}4$ fractions and decreased remarkably of $0.92{\sim}0.98$ afterward. Average pH was the highest of 5.70 in jakyak and lowest of 4.37 In gilkyung. Absorbances of the herb Packing distillate were decreased rapidly of $0.60{\sim}1.59$ in the $1{\sim}4$ fractions but slowely of $0.19{\sim}0.54$ in the next fractions. During distillation both fractional alcohol concentration of the distillates and distillation rate were decreased. Their values were decreased more slowly than the control. Distillation rates of medicinal herb wine distillate were varied by medicinal herb varieties and alcohol concentration of fermented wine. Danggwi and control showed the highest average distillation rate as $0.12\;m{\ell}/sec$ and gilkyung the lowest value as $0.073\;m{\ell}/sec$. Maximum concentration of index component, paeoniflorin of jakyak was observed as 293 mg% in the 5th fraction of herb packing distillate and decrusin of danggwi as 3514 mg% In the 1st fraction of herb packing distillate. The extraction rate was 41.3% for paeoniflorin and 20.5% for decrusin. From sensory evaluation, the highest overall Qualify was observed in the medicinal herb wine distillate of hwangki added wine, the next in those of danggwi and jakyak added wine.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.2
• /
• pp.261-269
• /
• 2015

In this study, we applied a membrane distillation process to investigate a feasibility of treating a wastewater with high concentration of organic matters including nitrogen and phosphorus. The laboratory scale experiment was performed by using a hydrophobic PVDF membrane with the pore size of $0.22{\mu}m$ and porosity of 75%. The installation was direct contact type where the temperature difference between a feed and permeate side was controlled to have a range from 20 to $60^{\circ}C$. We observed a flux variation and a concentration changes of COD, $PO{_4}^{3-}$-P, $NH_4{^+}$-N and conductivity of feed side as well as permeate side with various temperature differences (20 to $60^{\circ}C$), cross flow velocities (0.09 to 0.27 m/s) through the module, and pH (6.6 to 12.0) of the feed that has the initial concentration of COD about 1,000 mg/L, total nitrogen 390 mg/L, total phosphorus 10 mg/L, conductivity of $7,000{\mu}s/cm$. The results showed that the average flux was ranged from 4 to $40L/m^2/hr$ which was almost similar with the flux of NaCl and deionized water used as a feed solution. The lowest flux was obtained at the operating condition with the temperature difference of $20^{\circ}C$ and cross flow velocity of 0.09 m/s while the highest one was measured with $60^{\circ}C$ and 0.27 m/s. Above 99% of COD and $PO{_4}^{3-}$-P in the feed could be rejected regardless of an operating condition. However, the removal rate of ammonium nitrogen was varied from 64 to 99% depending on the pH of feed solution.

• Applied Chemistry for Engineering
• /
• v.21 no.6
• /
• pp.616-620
• /
• 2010

This study was performed to recycle Propylene Glycol Monomethyl Ether Acetate (PGMEA) from Liquid Crystal Display (LCD) industry emission as a waste organic solvent by using a multistage distillation column and tried to decide optimum reflux ratio. From the final experiment result, it was confirmed ; in case the sample A, the PGMEA purity is more than 98% and the moisture is less than 0.05%, on the other hand, in case the sample B, the PGMEA purity is more than 95% when the reflux ratio is 6 and the moisture is less than 0.01% (Refer to Table 1 for the contents of sample A and B). These values means fine level which can be adapted in the LCD manufacture, requiring more than 90% common purity of recycling level.

• Journal of Korean Society of Forest Science
• /
• v.96 no.1
• /
• pp.65-69
• /
• 2007

Essential oils which were isolated from leaves and twigs of Lindera obtusiloba Blume by steam distillation method were analyzed by the NIST and Wiley 6 Library method, using GC-MS. 24 components from the experiment were identified, and sesquiterpenoids were major of the components. The main constituents in the leaves were germacrene B (17.78%), ${\beta}-caryophyllene$ (17.50%), phytol isomaer (13.36%) and $(-)-{\beta}-elemene$ (11.07%), and the main in the twigs were ${\beta}-elemol$ (24.47%), ${\alpha}-cadinol$ (13.73%), camphor (9.83%) and ${\beta}-citronellol$ (9.54%). Acyclic diterpene such as phytone, phytol and phytol isomer were isolated for the first time in the leaves of L. obtusiloba.

• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.243-248
• /
• 2005

Membrane pervaporation processes could have advantages over distillation for separation of water/organics mixtures: a low energy demand and the ability to separate azeotropic mixtures or isomers. Zeolite membranes might show better thermal, mechanical and chemical stabilities than polymer membranes. Water could be effectively separated from water/organic mixtures using the NaA zeolite membrane because of its high hydrophilicity. In this study, water was separated by pervaporation using the NaA zeolite membrane from water/ethanol mixtures. As a mole fraction of ethanol increased, the total permeation flux and the water flux decreased while the separation factor increased, reached a maximum point, and decreased. As an experimental temperature increased, the total permeation flux increased while the separation factor increased at the lower mole fraction of ethanol than 0.8 and it decreased at the higher mole fraction of ethanol than 0.8. The total permeation flux and the separation factor could be maintained constant during the long term experiment longer than 160 hours. It was found that the NaA zeolite membrane synthesized in our study showed better performance on water/ethanol separation than that of a distillation process or PVA polymeric pervaporation membranes.

• Journal of Advanced Engineering and Technology
• /
• v.4 no.4
• /
• pp.431-436
• /
• 2011

This study was carried out to reduce the problem during distillation process, which separate U, TRU (TRans Uranium) metal electro deposit, Cd and LiCl-KCl eutectic salt generating from LCC (Liquid Cadmium Cathode) electro winning process. The cadmium recovering apparatus was manufactured to separate for each metal using solid-liquid separation method. The apparatus consists of the first sieve for the separation of U and TRU metal electrodeposit, the second sieve for the separation of LiCl-KCl eutectic salt, cadmium collection basket, and a heating furnace. In addition, the size of each sieve is 2 mm to 3 mm. In this experiment, a metal wire was employed to replace TRU metal electrodeposit and U, which exist actually in a LCC crucible. In the solid state, The LiCl-KCl is separated at 340℃ at which the solid and the liquid of the remaining cadmium and LiCl-KCl eutectic salt coexists in each, after the metal wire separated at 500℃. As a result, it seems that it would be beneficial to set the processing condition in the distillation process with the additional treatment process of cadmium and LiCl-KCl eutectic salt.

• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.76-80
• /
• 1991

To isolate oryzanol from the by-product of rice bran oil refinning, experiment of solvent fractional crystallization was carried out at various conditions with the dark oil obtained by acidifying the soap stock of micella refinning process and the pitch obtained from vacuum distillation of the dark oil. The impurity interfering the crystallization process such as waxes can be removed as precipitates by cooling the 1:1 mixtrue of acetone and dark oil to $0^{\circ}C$, From the dewaxed dark oil, oryzanol concentrate with 51.3% purity was obtained by fractional crystallization at$0^{\circ}C$ with the mixture of 8 part volume of hexane and 1 part of the dewaxed dark oil. The concentrate was recrystallized at room temperature with 20 part volume of methanol to yield oryzanol crystal of 98.3% purity. The optimum condition of vacuum distillation was temperature of $180^{\circ}C\;at\;0.2{\sim}0.4\;torr$ with 2% steam sparging. At this condition, the free fatty acid in the dark oil was removed as distillate without thermal deomposition to yield 82.3% of oryzanol as the pitch of 27.3% purity. After concentration from the pitch with 20 part volume of hexane to yield yellow powder of 75.4% purity, the yellow powder was recrystallized in methanol at room temperature to obtain the crystal containing 99.0% oryzanol. The overall oryzanol yield from the dark oil and the pitch was 9.5 and 28.5%, respectively. The change of the composition of sterols and triterpenoid alcohols in the compounds isolated during fractionation was analyzed by GC-MS.

• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1268-1274
• /
• 1999

Pine twigs with buds were cut into $2{\sim}3\;mm$ long pieces and about 18g was used for each experiment. Pressure and temperature ranges employed were $100{\sim}300\;bar$ and $35{\sim}55^{\circ}C$, respectively. Volatile compounds of extracts were isolated and identified by gas chromatography and mass selective detector. Twenty three compounds from the extracts were identified. Limonene and ${\beta}-pinene$ were found to be the major components with $32.6{\sim}43.4%$ being limonene. Extracts obtained by supercritical fluid extraction were lower in monoterpene and higher in oxygenated terpenoids than those by steam distillation and solvent extraction (SDE). Sensory evaluation showed that the pine flavor extracted using supercritical carbon dioxide was much better in quality than that of SDE. In conclusion, it was found out that supercritical fluid extraction can successfully be applied to extract high quality flavor from pine.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.845-855
• /
• 2021

In this study, Camellia sinensis Leaf cultivated in Boseong was extracted by vacuum distillation and hydrothermal extraction methods, and we performed in vitro experiments such as antioxidant, anti-wrinkle, whitening, and antibacterial activity test and HPLC analysis. Wrinkle improvement (elastase inhibition assay) and whitening effect (mushroom tyrosinase inhibition assay) of Boseong vacuum distilled extract have excellent results and IC50 values of vacuum distillation extract was measured at a lower concentration than that of the hydrothermal extract. The antioxidant activity of the Boseong hydrothermal extract was excellently measured in DPPH radical and ABTS+ radical scavenging activity, SOD-like activity, and total polyphenol content. In the antibacterial experiment, the Boseong hydrothermal extract formed a clear zone for the Staphylococcus aureus and Cutibacterium acnes strain. As a result of HPLC analysis, EGCG and caffeine in the hydrothermal extract were 40.29 mg/g, 9.94 mg/g respectively, and caffeine in the vacuum distilled extract was 3.40 mg/g. Therefore, we examined that Boseong Camellia sinensis vacuum distilled extract has excellent anti-wrinkle and whitening effect, and its hydrothermal extract has good antioxidant and antibacterial efficacy.

• Analytical Science and Technology
• /
• v.7 no.1
• /
• pp.125-132
• /
• 1994

Flavours in kimchee are the result of unique combination of various sugars, organic acids and amino acids as well as various volatile organic compounds including sulfur-containing compounds, terpenes, alcohols, and some volatile organic acids. In the experiment for the flavour extracting methods, dynamic headspace(DHS) is more effective for collection of volatile flavour than simultaneous distillation extraction(SDE). The best polarity available at the moment is 5% phenyl methyl poly-siloxane which will separate non-polar, intermediate and polar components with good resolution.