• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.56-59
• /
• 2002

This paper presents a study on the permittivities of the E-glass fabric/epoxy composite laminates containing carbon black dispersions at microwave frequency. Measurement showed that the complex permittivities of the composites depend strongly on the natures and concentrations of the carbon black dispersion. A new scheme to obtain a mixing law for the estimation of complex permittivity is proposed. The experimental values of the complex permittivities were compared to those calculated. Simultaneously, the complex permittivity of carbon black itself was also calculated by the scheme.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.9 no.1
• /
• pp.1-3
• /
• 2009

Recently, Carlsson, Full\acute{e}$r and Majlender [1] presented the concept of possibilitic correlation representing an average degree of interaction between marginal distribution of a joint possibility distribution as compared to their respective dispersions. They also formulated the weak and strong forms of the possibilistic Cauchy-Schwarz inequality. In this paper, we define a new probability measure. Then the weak and strong forms of the Cauchy-Schwarz inequality are immediate consequence of probabilistic Cauchy-Schwarz inequality with respect to the new probability measure.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.5-8
• /
• 2001

Waterborne Polyurethane dispersions continue to show growth in commercial usage due to the ever increasing environmental legislation to reduce VOC in Coating and adhesive materials. The transition from solvent-based to waterborne Polyurethane(WPu) has also been facilitated by advances in both the chemistry and technology employed and the formulation expertise required. (omitted)

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.413-414
• /
• 2006

The effects of several experimental parameters on the formation of stable Ni nanoparticles dispersion were investigated. The suspensions of Ni nanoparticles were produced in organic solvents using Hypermer KD-2 as a dispersant. The transmission profiles, particle size distribution, zeta potential, and visual inspection results were used to discuss the stability of the dispersion. The optimal conditions for the formation of stable dispersion are evaluated.

• Kyungpook Mathematical Journal
• /
• v.49 no.2
• /
• pp.299-312
• /
• 2009

In the present paper we investigate the existence of almost periodic processes of ecological systems which are presented with nonautonomous N-dimensional impulsive Lotka Volterra competitive systems with dispersions and fixed moments of impulsive perturbations. By using the techniques of piecewise continuous Lyapunov's functions new sufficient conditions for the global exponential stability of the unique almost periodic solutions of these systems are given.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.667-671
• /
• 1995

The viscometric technique is used to study the effects of microstructure on the viscosity (viscosity vs. concentration or shear rate) of magnetic particle suspensions. In this characterization, measurement of suspension viscosity is used to obtain the dependence of viscous energy dissipation on microstructural state of dispersions. Microstructural shape effects which are related to particle orientation are then indirectly obtained. Empirical formulas from mean field theory and the Mooney equation, which are applicable at high concentration of magnetic particles, are used to relate viscosity to particle concentration. The validity and physical meaning of these equations are discussed.

• Proceedings of the PSK Conference
• /
• 2003.10a
• /
• pp.50-53
• /
• 2003

Aceclofenac (AFC) as a model has poor solubility in water, resulting in lower dissolution rate and bioavailability. A solid dispersion (SD) is one of effective methods to enhance the solubility or dissolution rate of various poorly water-soluble drugs. Polyvinylpyrrolidone (PVP) that is a nontoxic, water-soluble and generally applicable pharmaceutical excipient has been widely used as a carrier in the preparation of solid dispersions. (omitted)

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.04a
• /
• pp.359.2-362
• /
• 2001

• Journal of Pharmaceutical Investigation
• /
• v.38 no.4
• /
• pp.249-254
• /
• 2008

Solid dispersions of poorly water-soluble drug, atorvastatin, were prepared with Eudragit L100 to improve the solubility by spray dryer. To investigate the correlation between physicochemical properties and dissolution rate of solid dispersions, the samples were characterized by scanning electron microscopy (SEM), differential scanning calorimeter (DSC) and fourier transform infrared spectroscopy (FT-IR). SEM and DSC were found that atorvastatin is amorphous in the Eudragit L100 solid dispersion. FT-IR was used to analyze the salt formation by interaction between atorvastatin and Eudragit L100. The dissolution rate of solid dispersed atorvastatin was markedly increased compared to drug powder in stimulated intestinal juice (pH 6.8). Thus, the solid dispersed atorvastatin using the spray drying method with Eudragit L100 may be effective for the bioavailability.

• KCI Concrete Journal
• /
• v.13 no.2
• /
• pp.42-48
• /
• 2001

The bend resistance of coated reinforcing bar is greatly influenced by both the adhesion strength between bar and coating materials, and the followed transformation of coating material as bars bend. Especially, tearing state or partial microscopic cracks are predicted on the inside and outside of bending angle, because tensile strength and elongation of polymer film are very different according to types of polymer dispersions in bar coating, and these damaged parts are rapidly corroded by penetration of corrosive factors. In this study, polymer cement slurry coated reinforcing bars with various polymer dispersions are prepared by following combined conditions, polymer-cement ratio of 50% and 100%, coating thickness of 250$\mu$m and 450$\mu$m, coating number, curing age of 3, 7, 14 and 28days. Then the specimens are tested for working life and bend resistance at bending angles $90^{\circ}$, $135^{\circ}$and $180^{\circ}$ to observe the microscopic damage effect as the bars bend. Also, epoxy-coated reinforcing bars for control experiment were used with 250$\mu$m of coating thickness. The tensile strength for polymer films is performed. From the test results, the working life of the polymer cement slurry is within 90 seconds. Among four types of polymer dispersion, polymer cement slurry coated reinforcing bar using St/BA-1 emulsion has the excellent bend resistance, which is remarkably improved than that of epoxy-coated reinforcing bar. And the bend resistance is more related to elongation than tensile strength of polymer film. Polymer cement slurry with a polymer-cement ratio of 100%, a coating thickness of $450\mu$m and one coating using St/BA emulsion is selected as a most suitable coating material for coated reinforcing bar.