• 한국수자원학회논문집
• /
• 제48권2호
• /
• pp.127-136
• /
• 2015

일반적으로 XP-SWMM은 맨홀을 하나의 절점으로 간주하여 절점의 형상과 크기에 따른 국부손실의 영향을 고려하지 못하기 때문에 침수면적을 과소 산정한다. 그러므로 과부하 맨홀 내에서의 손실계수를 고려한 해석 방안 및 손실계수의 적용에 따른 침수해석에 관한 연구가 필요하다. 본 연구에서는 유량변화 및 맨홀 형상 변화에 따른 수리실험을 실시하여, 과부하 맨홀(원형, 사각형)에서의 손실계수를 각각 0.61과 0.68로 산정하였다. 또한 XP-SWMM을 이용하여 군자배수분구를 대상으로 산정된 손실계수의 적용 유무에 따른 침수면적의 변화특성을 분석하였다. 분석 결과 손실계수를 적용하면 침수면적이 3.5ha 증가하는 것으로 나타났다. 이는 손실계수 적용에 따라서 맨홀에서의 월류량이 증가하기 때문이다. 대상유역에 손실계수를 적용하였을 경우 실제 침수면적과의 일치율은 약 58%로 나타났으며, 손실계수를 고려하지 않았을 경우의 일치율은 약 40%로 나타났다. 그러므로 과부하 맨홀에서의 손실계수를 고려한 2차원 침수해석의 결과는 도시지역의 침수 위험지역을 정확하게 파악하기 위한 기초적인 자료로 활용이 가능할 것으로 판단된다.

• 설비공학논문집
• /
• 제17권11호
• /
• pp.1022-1027
• /
• 2005

An experimental study is conducted to investigate the characteristics of the ion wind generated by the electric field between a needle electrode and the parallel plate electrodes. The ion wind enhances heat and mass transfer between the surface and the surrounding gas. Moreover such enhancement makes no noise or vibration. This study is conducted to develop the electronic cooling device. The measured gas velocities and heat transfer coefficients are proportional to the applied voltage. The heat transfer coefficient can be increased as compared with a natural convection. The maximum enhancement of heat transfer obtained in this system is $47\%$ for 3 W in heat transfer rate.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.74-79
• /
• 2012

It depends on the joint configuration, dimensions and constraints of the joint whether the residual stress at the root of single-sided butt weld is tensile or not. Therefore, recommendation is generally made that high R ratio should be used in the fatigue test of welded joint in order to prevent excessively long life caused by compressive residual stress. In this research, the residual stress profile in butt weld joint was obtained through compliance method, using successive extension of a slot and measurement of the variation of strain during the slot extension. The residual stress profile was firstly assumed to be the linear summation of Legendre polynomials up to 9th order excluding 0th and 1st order. Strain variation on the surface was measured while the slot was being extended by cutting to find out the 8 unknown coefficients of each polynomial term. The cut was made by the electric discharge machine. It was concluded that the residual stress near the surface is positive valued, however, it turned into the negative value as soon as it passed through 2 or 3 mm of the depth.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.518-521
• /
• 2004

The degradation characteristics of MgO protective layer and phosphors have been investigated in terms of the ion-induced secondary electron emission coefficient ${\gamma}$ and static margin of discharge voltages, respectively, in this experiment. The ion-induced secondary electron emission coefficients ${\gamma}$ for the degraded MgO protective layer and phosphors have been studied by ${\gamma}$ -focused ion beam system. The energy of Ne+ ions used is from 80 eV to 200 eV in this experiment. The degraded MgO and phosphor layers are found to have higher ${\gamma}$ than that of normal ones without degradations or aged one. Also, the static margin of discharge voltages for test panels with degraded MgO protective layer and phosphors been found to be seriously decreased in comparison with those of normal ones without degradations.

• Journal of the korean society of oceanography
• /
• 제36권3호
• /
• pp.59-71
• /
• 2001

In order to investigate the temporal variability of dissolved and particulate trace metals in the Han River, water samples were collected intermittently at two sites for 3 years (August 91 to December 94). Surface seawaters covering the range of salinity were also collected at the estuarine region to evaluate the role of estuary for the riverine fluxes of trace metals within the estuary during October 95 and 96. During the study period, dissolved metal concentrations in riverwaters varied by a factor of 5-10 for Fe, Ni, Co and Cu and 50-100 for Mn, Cd and Pb depending upon the water level; high concentration during the low water and low concentration in high water period except for Fe. The concentration of dissolved Fe increased with increasing water discharge. These concentration-discharge relationships of the studied trace metals are explained by the successive dilution of waters from two different origins, which can be presumably identified as anthropogenic discharges and watershed flushing. Although estuarine waters at early mixing region were not collected due to the difficulty of sampling, mixing behaviors of metals were inferred from the concentration-salinity relationships through the laboratory mixing experiment and field sampling, and distribution coefficients between dissolved and labile particulate phases. It is suggested that the Han River estuary plays a role of accumulating Fe, Mn, Co and Pb from riverine sources due to high turbidity caused by strong tidal current, whereas this system serves as a source of dissolved Cd due to release caused by extended residence time of riverine particles.

• 한국농공학회논문집
• /
• 제54권4호
• /
• pp.29-38
• /
• 2012

Drip irrigation is a affordable irrigation under structured cultivation. Drip irrigation system with high uniformity can be achieved through effective design, maintenance and management of irrigation systems. Nevertheless the design guidelines have not been established for the drip irrigation system products in domestic and imported considering cultivation method and greenhouse environment in Korea. The objectives of this study were to evaluate the performance of drip irrigation system with uniformity through an experiment. The experiment was conducted to study with nine different types of emitters produced in domestic and imported. Hazen-Williams coefficients were also estimated for the drip emitter through hydraulic simulation for design use. It was found that approximately 91.5 % for 10 cm emitter spacing and 96.2 % for 30 cm emitter spacing of statistical uniformity were observed in respectively. Average emission uniformity was decreased as the reduction of emitter spacing. The results would be used in the drip irrigation system design and guideline construction.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.103-103
• /
• 2010

Dependence of radical and ion densities on Plasma Parameters is theoretically investigated in $Cl_2$/Ar plasma discharges. Firstly, a set of reliable rate coefficients is obtained by direct calculations with cross section data set and by comparing them with previously reported values. Then, some global discharge simulations are performed for ICP(inductively coupled plasma) discharges and the results are compared with experimental results. Finally, the validated data set is used to analyze the dependence of radical and ion densities, which are usually not easy to be measured, on electron density arid temperature.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.268-274
• /
• 2013

Electric discharge machining drill (EDM-drill) is an efficient process for the fabrication of micro-diameter deep metal hole. As there is non-physical contact between tool (electrode) and workpiece, EDM-drill is widely used to machine the hard machining materials such as high strength steel, cemented carbide, titanium alloys. The electro-thermal energy forces the electrode to wear out together with the workpiece to be machined. The electrode wear occurs inside of a machining hole. and It causes hard to monitor the machining state, which leads the productivity and the quality to decrease. Thus, this study presents a methodology to estimated the electrode wear amount while two coefficients (scale factor and shape factor) of the logarithmic regression model are evaluated from the experiment result. To increase the accuracy of estimation model, the linear transformation method is adopted using the differences of initial electrode wear differences. The estimation model is verified through experiment. The experimental result shows that within minute error, the estimation model is able to predict accurately.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.389-392
• /
• 2007

별도의 가압장치가 없이 산화제탱크 내에 저장된 $N_2O$액체산화제가 공급될 때 액체에서 기체로의 상변화를 고려하여 $N_2O$액체 산화제의 유량공급특성을 예측하였다. 보다 정확한 산화제 공급특성을 계산하기 위해 산화제의 압력과 온도에 따른 $N_2O$의 물성치 변화를 고려하였으며 오리피스 형상과 토출계수 관계식을 이용하여 산화제 유량을 계산하였다. 그리고 산화제 공급에 따른 산화제탱크 내의 압력변화를 측정하고 해석결과와 비교하였다.

• 한국수자원학회논문집
• /
• 제34권5호
• /
• pp.543-549
• /
• 2001

수리학적 하도추적으로부터 하천유량을 간접추정하였다. 짧은 하천구간의 세 지점 연속수위자료와 하천 단면 자료만을 사용하여 조도계수 추정b과 하천유량 계산이 가능하였다. 유량의 간접추정 과정에서, 상류-하류 경계조건을 수위-수위 조건으로 사용하였다. 미국 미시시피 강의 상류 구간 자료가 사용되었고 수리학적 하도추적에는 DWO-PER (operational dynamic wave model)를 이용하였다. DWOPER 모형에서 수정 Newton-Raphson법에 의한 조도계수 추정과정을 개선하기 위하여 SCE-UA 전역최적화 기법을 적용하였으며, SCE-UA 기법의 결과가 적은 오차를 보였다. 특정 홍수에 대하여 유량을 추정한 결과, 몇 개를 제외한 대부분의 계산유량이 10% 이내의 오차를 보였다.