• 인터넷정보학회논문지
• /
• 제12권3호
• /
• pp.69-76
• /
• 2011

온라인 중개 서비스 시스템에서 원하는 고객을 상호 매칭시키는 기능은 핵심 역할 중의 하나이다. 매칭은 정보검색과 같이 한쪽의 의사만으로 결정되는 단방향과, 양쪽 사용자의 의사를 모두 고려하는 양방향 방식이 있다. 기존의 양방향 방식은 사용자가 상대에 대한 관심을 직접 입력하여야 하므로 입력의 번거로움 뿐만 아니라 상대가 나에 대해 관심을 입력하지 않은 경우는 서비스 활용이 어렵다는 문제점이 있었다. 따라서 본 연구는 퍼지 알고리즘을 이용하여 시스템이 상대의 흥미를 자동으로 계산하도록 하여 양방향 방식을 자동화 하고자한다. 개발된 퍼지 알고리즘의 구인/구직 정보매칭 결과가 모두 95%이상의 취업알선가능률을 보였다. 또한 실 서비스에 구축하여 도입효과를 분석한 결과 취업활동 동기 부여에 통계적으로 유의미한 긍정적인 효과가 나타났다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.300-307
• /
• 2002

Bridge foundation failure considering the effect of local scour around pier foundations under hi-directional seismic excitations is examined in probabilistic perspectives. The seismic responses of bridges with deep foundations are evaluated with a simplified mechanical model, which can consider the local scour effect around the deep foundation in addition to many other components. The probabilistic characteristics of local scour depths are estimated by using the Monte Carlo simulation. The probabilistic characteristics of basic random variables used in the Monte Carlo simulation are determined from the actual hydraulic data collected in middle size streams in Korea. The failure condition of deep foundation is assumed as bearing capacity failure of the ground below the foundation base. The probability of foundation failure of a simply supported bridge with various scour conditions and hi-directional seismic excitations are examined. It is found that the local scour and the recovery duration are critical factors in evaluating the probability of foundation failure. Moreover, the probability of foundation failure under hi-directional seismic excitations is much higher than under uni-directional seismic excitations. Therefore, it is reasonable to consider hi-directional seismic excitations in evaluating the seismic safety of bridge systems scoured by a flood.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.914-921
• /
• 2006

To describe the effect of the numerous and various oriented microcracks on the compressive and tensile concrete behaviors, the directional nonlocality is defined. The plasticity model using multiple failure criteria is developed for RC planar members in tension-compression. The crack damages are defined in the pre-determined reference orientations, and then the total crack damage is calculated by integrating multi-oriented crack damages. To describe the effect of directional nonlocality on the anisotropic tensile damage, based on the existing test results, the nonlocal damage factor is defined in each reference orientation. The reduced compressive strength in the cracked concrete is defined by the multi-oriented crack damages defined as excluding the tensile normal plastic strain from the compressive equivalent plastic strain. The proposed model is implemented to finite element analysis, and it is verified by comparisons with various existing panel test results.

• 한국해양공학회지
• /
• 제26권2호
• /
• pp.68-78
• /
• 2012

This study proposes an improved 3-D model that includes a new non-reflected wave generation system for oblique incident and multi-directional random waves, which enables us to estimate the effect of the various wave-types on 3-D wave fields in a coastal area with permeable submerged breakwaters. Then, using the numerical results,the three-dimensional wave field characteristics around permeable submerged breakwaters are examined in cases of oblique incident and multi-directional random waves. Especially, the wave height, mean surface elevation and mean flow around the submerged breakwaters are discussed in relation to the variation of incident wave condition.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2012년도 한국컴퓨터종합학술대회논문집 Vol.39 No.1(C)
• /
• pp.406-407
• /
• 2012

Texture transfer is a NPR technique for expressing various styles according to source (reference) image. By late 2000s, there are many texture transfer researches. But video base researchers are not active. Moreover, they didn't use important feature like directional information which need to express detail characteristics of target. So, we propose a new method to generate texture transfer animation (using video) with directional effect for maintaining temporal coherence and controlling coherence direction of texture. For maintaining temporal coherence, we use optical flow and confidence map to adapt for occlusion/disocclusion boundaries. And we control direction of texture for taking structure of input. For expressing various texture effects according to different regions, we calculate gradient based on directional weight. With these techniques, our algorithm can make animation result that maintain temporal coherence and express directional texture effect. It is reflect the characteristics of source and target image well. And our result can express various texture directions automatically.

• ETRI Journal
• /
• 제27권6호
• /
• pp.697-707
• /
• 2005

This paper proposes a new design of directional couplers with high directivity for personal communication services (PCS) and International Mobile Telecommunications-2000 (IMT-2000). The directional coupler is used to check and verify the power, frequency, and antenna reflection of a signal at transmission stations for mobile communications. The performance requirements of directional couplers are a strong coupling to reduce the effect on the transmitted power and high directivity to suppress the interference of the reflected signals and reduce the errors in communication. So far, various architectures have been proposed to gain high directivity, and there have been many studies used to obtain a strong coupling. However, conventional architectures for high directivity and strong coupling have a directivity of only about 20 dB, and there have been difficulties to achieve the higher directivity of 30 dB suitable for PCS and IMT-2000. This paper proposes a new architecture of directional couplers based on a grounding composed of strip lines, and compares the test results of this directional coupler with conventional ones. The results show that the proposed directional coupler has a directivity of more than 30 dB and is adequate for PCS and IMT-2000.

• 드라이브 ㆍ 컨트롤
• /
• 제15권1호
• /
• pp.1-9
• /
• 2018

The spool displacement of directional control valve can be considered as the standard signal to measure the bandwidth frequency of a directional control valve. When the spool displacement is not available, the metering-orifice system is implemented in this research as an alternative way of measuring the 90 degrees phase bandwidth frequency of the hydraulic directional control valve. The inertia effect on the transmission line oil induces the phase lead of the valve load pressure when compared with the phase of spool displacement. The capacitance effect of the oil induces the phase lag of the valve load pressure. The phase of the load pressure can be adjusted to be the same as that of the spool displacement by controlling the opening area of the metering orifice. A series of experiments were conducted to verify the effectiveness of the metering orifice. The 90 degrees phase bandwidth frequency measured from the valve load pressure was significantly deviated in some cases from the frequency of the spool displacement. The metering orifice was hard to be applied to measure the -90 degrees phase bandwidth frequency of the high precision.

• Coupled systems mechanics
• /
• 제5권2호
• /
• pp.101-126
• /
• 2016

Seismic structural fragility constitutes an important step for performance based seismic design. Lateral load-resisting structural members are often analyzed under one component base excitation, while the effect of bi-directional shaking is accounted per simplified rules. Fragility curves are constructed herein under real bi-directional excitation by a simple extension of the conventional Incremental Dynamic Analysis (IDA) under uni-directional shaking. Simple SODF systems, parametrically adjusted to different periods, are examined under a set of near-fault and far-fault excitations. Consideration of bi-directional interaction appears important for stiff systems. Further, the study indicates that the peak ground accelertaion, velocity and displacement (PGA, PGV and PGD) of accelerogram are relatively stable and efficient intensity measures for short, medium and long period systems respectively. '30%' combination rule seems to reasonably predict the fragility under bi-directional shaking at least for first mode dominated systems dealt herein up to a limit state of damage control.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권5호
• /
• pp.238-242
• /
• 2001

In this paper, we extracted design parameters for re-entrant mode microstrip directional coupler using FE(finite element) calculations. The microstrip directional coupler suffers from a poor directivity due to effect of the inhomogeneous dielectric including both dielectric substrate and air in microstrip transmission lines. Thus, the phase velocity of even mode is not equal to that of odd mode. In order to improve the directivity of microstrip directional coupler, a novel re-entrant mode microstrip directional coupler was employed. In microstrip configuration, the high directivity can be reached by matching the even- and odd-mode effective phase velocities. Through the values of capacitance obtained from 2-dimensional FE calculations, the phase velocities for each mode and the design parameter were extracted for the proposed parallel coupled-line configuration. Based on the extracted design parameter with phase matching condition, we designed and fabricated a 30dB directional coupler at 0.85GHz. Experimental results show good performance with excellent, isolation and directivity.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권4호
• /
• pp.443-450
• /
• 1995

A directional coupler which on the X-cut $LiNbO_3$ substrate is fabricated by using proton exchange method and self-aligned method. After proton exchange process, the waveguide is formed by annealing process. The relation ship between refractive index change of waveguide and maximum output was studied along with the annealing time. A self-aligned method was used to simplify the fabrication process of the waveguide and to maximize the efficiency of electric field. The on-off state of modulator has been observered with the switching of the directional coupler by the electric field effect and also the switching voltage of the directional coupler has been measured with 8.0 [V].