• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.2
• /
• pp.248-253
• /
• 2006

For the determination of vitamin I using high performance liquid chromatography (HPLC), the most critical and time consuming step is the Quantitative extraction of all vitamin E homologs from sample matrix. Three different extraction methods were compared to determine vitamin E in grains. Saponification used alkaline hydrolysis followed by solvent extraction. Direct solvent extraction included dispersing the samples in hot water, addition of isopropanol and $MgSO_4$, and extraction of the analytes with extracting solvent with Polytron homogenization. Using Soxhlet extraction, the samples were extracted in a Soxhlet apparatus with hexane containing butylated hydroxytoluene (BHT). Vitamin E content in 14 grains were analyzed and compared by three different extraction methods. Generally, the highest values were observed from direct solvent extraction and Soxhlet extraction followed by saponification. a-Tocopherol equivalent (a-TE) levels in grains ranged from 0.32 a-TE/100 g in prosomillet to 5.12 a-TE/100 g in black rice.

• Journal of Environmental Science International
• /
• v.28 no.11
• /
• pp.927-933
• /
• 2019

A lipid-enriched strain of Botryococcus braunii (UTEX 572) was cultivated in a semi-batch aeration tank to enhance biomass as well as to develop intracellular lipids and fatty acids. A 30 day period of incubation produced 1.39 g/L of biomass and 0.31 g/L of total lipids in the biomass. The grown biomass was pre-treated using several methods to extract the total lipid content efficiently: ultrasonication was found to yield the highest percentage of lipids-namely 19.8% per biomass. Direct heating of biomass in an autoclave also showed better performance than when using only conventional solvent extraction. To enhance the biomass harvest and lipid extraction efficiency, coagulation and flocculation steps were added to the extraction process. It is noteworthy that not only the solvent type but also the solvent/biomass ratio greatly affected efficiency. In addition, the moisture content of the harvested(wet) biomass affected the efficiency significantly. This study elucidated the need for future research on optimizing this extraction process.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3196-3202
• /
• 2012

Post-synthesis is used to synthesize organic hybrid inorganic mesoporous sieves. In this method, the activity and structure of the base sieve are crucial to obtain the definable hybrid materials. The chemical and physical properties of the base can be largely changed either by the final step of its synthesizing processes, by template removal which is accomplished with the oxidative thermal decomposition (burning) method or by solvent extraction method. In this paper we compared two methods for the post-synthesis of organic hybrid MCM-48. When the template was extracted with HCl/alcohol mixture, the final product showed larger pore size, larger pore volume and better crystallinity compared to the case of the thermal decomposition. The reactivity of the surface silanol group of template free MCM-48 was also checked with an alkylsilylation reagent $CH_2=CHSi(OC_2H_5)_3$. Raman and $^{29}Si$ NMR spectra of MCM-48 in the test reaction indicated that more of the organic group was grafted to the surface of the sample after the template was removed with the solvent extraction method. Direct synthesis of vinyl-MCM-48 was also investigated and its characteristics were compared with the case of post-synthesis. From the results, it was suggested that the structure and chemical reactivity can be maintained in the solvent extraction method and that organic grafting after the solvent extraction can be a good candidate to synthesize a definable hybrid porous material.

• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.391-407
• /
• 2023

This article provides a survey of wet (aqueous) methods for recovery, separation, and purification of uranium from fission products in carbonate solutions during the reprocessing of spent nuclear fuel and methods for removal of radionuclides from alkaline radioactive waste. The main methods such as selective direct precipitation, ion exchange, and solvent extraction are considered. These methods were compared and evaluated for reprocessing of spent nuclear fuel in carbonate media according to novel alternative non-acidic methods and for treatment processes of alkaline radioactive waste.

• Mass Spectrometry Letters
• /
• v.8 no.1
• /
• pp.8-13
• /
• 2017

Analysis of quinidine for fish tissues using single drop microextraction (SDME) coupled with atmospheric pressure matrix assisted laser desorption/ionization mass spectrometry (AP-MALDI-MS) are reported. Optimization conditions; such as extraction solvent, extraction time, pH of the aqueous solution, salt additions (NaCl), stirring rate, matrix type and concentration are investigated. Linear dynamic range (${\mu}M$), limit of detection, relative recovery%, and enrichment factor are 0.08-9.2, 0.05, $94.8{\pm}3.1-98.5{\pm}3.3%$, $4.34{\pm}0.28-4.40{\pm}0.30$, respectively. SDME-AP-MALDI-MS shows good intraday and interday reproducibility.

• Natural Product Sciences
• /
• v.23 no.2
• /
• pp.75-83
• /
• 2017

The optimization and microwave assisted extraction of stem bark of Terminalia arjuna, quantitative estimation of the marker compounds arjunic acid and arjunolic acid using HPTLC and the evaluation of free radical scavenging activity has been performed in this study. The central composite design was used for optimization and the values of parameters for optimized batch of microwave assisted extraction were 1000 W (Power), 3 minutes (Time) and 1/120 (Solid/solvent ratio). The solvent system to carry out the HPTLC was toluene: acetic acid: ethyl acetate (5: 5: 0.5) and quantitative estimation was done using standard equations obtained from the marker compounds. The in-vitro free radical scavenging activity was performed spectrophotometrically using ascorbic acid as standard. The value of estimated percentage yield of arjunic acid and arjunolic acid was 1.42% and 1.52% which upon experimentation was obtained as 1.38% and 1.51% respectively. The DPPH assay of the different batches of microwave assisted extraction and marker compounds taken suggested that the marker compounds arjunic acid and the arjunolic acid were responsible for the free radical scavenging activity as the batch having the maximum percentage yield of the marker compounds showed best free radical scavenging effect as compared to standard ascorbic acid. The $IC_{50}$ value of the optimized batch was found to be 24.72 while that of the standard ascorbic acid was 29.83. Hence, the yield of arjunic acid and arjunolic acid has direct correlation with the free radical scavenging activity of stem bark extract of Terminalia arjuna and have potential to serve as active lead compounds for free radical scavenging activity.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.1
• /
• pp.120-143
• /
• 2018

The analytical methods and their ambient levels of organic nitrogenous compounds such as nitrosamines, nitramines (nitroamines), imines, amides and nitro-polycyclic aromatic hydrocarbons (nitro-PAHs) in the atmosphere are summarized and discussed. Sampling for the analysis of organic nitrogenous compounds was mostly conducted using high volume air sampler. The direct liquid extraction (DLE) using sonification and the pressurized liquid extraction (PLE) using the accelerated solvent extraction (ASE) have been frequently employed for the extraction of organic nitrogenous compounds in the atmospheric samples. After extraction, clean-up via filtration and the solid phase extraction (SPE) and concentrations using nitrogen and rotary evaporator have been generally conducted but in some studies the clean-up and concentration steps have been omitted to prevent the loss of analyte and improve the recovery rate of the analytical procedure. Instrumental analysis was mainly carried out using gas chromatography (GC) or the high performance liquid chromatography (HPLC) coupled with the single quadrupole mass spectrometer or tandem mass spectrometer in the electron ionization (EI), positive chemical ionization (PCI) and negative chemical ionization (NCI) mode and analysis sensitivity of nitrosamines and nitramines were higher in NCI mode. Desirable sampling and analysis methods for analyzing particulate organic nitrogenous compounds are suggested.

• Analytical Science and Technology
• /
• v.20 no.1
• /
• pp.41-48
• /
• 2007

The determination method for the trace lead and cadmium in glass materials was developed by ICP-AES. The lead- and cadmium-DDTC chelates were formed by adding Na-DDTC (sodium diethyldithiocarbamate) as a chelating agent and extracted into MIBK (methyl-isobutyl ketone). Direct measuring of the trace lead and cadmium in glass was not possible because of the interferences of matrix elements as Na, Si, Mg and Ca of glasses unless solvent extraction of lead and cadmium was applied. This procedure was confirmed to be valid quantitative method of Pb and Cd analysis in glass did not influence of sample matrix, by applying it procedure to artifact sample and NIST SRM 1412.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.5
• /
• pp.781-785
• /
• 2005

A fast and reliable method for the selective separation and preconcentration of $Cu^{2+}$ ions using homogeneous liquid-liquid extraction was developed. A new $\alpha$-dioxime derivative (2H-1,4-benzothioazine-2,3(4H)dionedioxime, Dioxime I) was synthesized and investigated as a suitable selective complexing ligand for $Cu^{2+}$ ions. Zonyl FSA (FSA) was applied as a phase-separator agent under the slightly acidic pH conditions. Under the optimal experimental conditions ([FSA] = 3.2% w/v, [THF] = 19.5% v/v, [Dioxime I] = 1.9 ${\times}\;10^{-3}$ M, and pH = 4.7), 10 ${\mu}g\;of\;Cu^{2+}$ in 5.2 mL aqueous phase could be extracted quantitatively into 80 $\mu$L of the sedimented phase. The maximum concentration factor was 65-fold. The limit of detection of the proposed method was 0.005 ng $mL^{-1}$. The reproducibility of the proposed method, on the 10 replicate measurements, was 1.3%. The influence of the pH, type and volume of the water-miscible organic solvent, concentration of FSA, concentration of the complexing ligand and the effect of different diverse ions on the extraction and determination of $Cu^{2+}$ ions were investigated. The proposed method was applied to the extraction and determination of $Cu^{2+}$ ion in different synthetic and natural water samples.

• Korean Journal of Pharmacognosy
• /
• v.41 no.1
• /
• pp.62-66
• /
• 2010

In result of analysis for the content determination of ursolic acid(UA) and oleanolic acid(OA) in extract of Eriobotryae folium using HPLC with UV detector, UA in chloroform extract of Moo-mok variety was showed highest content(2.7843 mg/g). And OA in ethyl acetate extract of Dae-bang variety was showed highest content(0.5898 mg/g). These result suggest that direct extraction using organic solvent(chloroform or ethyl acetate) was useful method for rapid quantitative analysis of UA and OA without preprocessing such as drying or fractionation.