• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.217-220
• /
• 1991

Ni-Zn ferrite powders in the few hundred angstrum size range and up have been synthesized by a wet direct method. The coprecipitate were prepared by adding alkaline solution into the constituent metal ions solution. and subsequent calcined at various temperature. At 95, the particles were ultrafine spherical shaped particles of about 500(A) in diameter.

• Textile Coloration and Finishing
• /
• v.21 no.5
• /
• pp.51-57
• /
• 2009

Since heavy metal pollution is a significant global environmental problem and very dangerous to human health, the improved methods for detecting heavy metals are required recently. Colorimetric chemosensors are now considered as one of the most effective analytical method used in the environment monitoring. New direct dyes having the function of colorimetric chemosensors were synthesized. When metal ions such as $Al^{3+}$, $Ca^{2+}$, $Cd^{2+}$, $Cr^{3+}$, $Cu^{2+}$, $Fe^{2+}$, $Fe^{3+}$, $Hg^{2+}$, $Li^+$, $Mg^{2+}$, $Na^+$, $Ni^{2+}$, $Pb^{2+}$ and $Zn^{2+}$ were added each solution of new direct dyes, the color of solution was changed and can be easily detected with naked eyes without expensive experimental equipment such as atomic absorption spectrometer (AAS) or inductively coupled plasma?mass spectrometer (ICP-MS). The new benzidine analogues were diazotized and reacted with couplers such as H-acid, J-acid, Chromotropic acid, Nevill-winther acid and gamma acid to synthesize new direct dyes. The structures of the new direct dyes were confirmed by high resolution mass spectrometer (FAB ionization) and evaluated with UV-Vis spectroscopy. The UV-VIS spectroscopy was measured for the dye solutions by adding various concentrations of metal ions. It was observed that the absorbance in UV-Vis spectra was changed as the heavy metal ions were added.

• Journal of the Korean Chemical Society
• /
• v.6 no.2
• /
• pp.122-124
• /
• 1962

The silver halide precipitate tends to separate in curdy form of flocculated colloid when it is precipitated by direct mixing of reactant solutions. This type of precipitate has a great tendency to adsorb or occlude foreign ions in the solution.When silver halide in precipitated from homogeneous solution using the slow hydrolysis of Alkyl halide or Ally halide, the precipitate becomes dense, filterable and uniform in particle size which is very advantageous in gravimetric analysis.We found that silver halide precipitates obtained from homogeneous solution with hydrogen halide formed by the hydrolysis of alkyl halide do not give the color change with fluorescein as adsorption indicater, while silver halide precipitates obtained by direct mixing method give sharply pink color which appear to be uniformly distributed through the solution in silver ion excess.

• Journal of Oral Medicine and Pain
• /
• v.5 no.1
• /
• pp.1-4
• /
• 1980

Caries free anterior teeth were rinsed for 10 minutes with 1%, 5% sodium fluoride and 1% stannous fluoride solution three times a day for the period of experiment. And the author measured the concentration of enamel fluoride by means of Mc Cann's Technique. And the results were as follows : 1. There were little difference of enamel fluoride concentration between the teeth treated with 5% sodium fluoride solution. 2. The enamel fluoride concentration shows a tendency of direct proportion in lower concentration of fluoride solution for the period of 10 days. 3. The Enamel fluoride concentration in the group treated with stannous fluoride solution reveals acute elevation in the 5th day of experiment but the trend was not direct proportional in the 10th day of experiment.

• Steel and Composite Structures
• /
• v.51 no.5
• /
• pp.575-586
• /
• 2024

Steel arch supports are used in mines and underground structures to provide stability. Most of the supports are made up of overlapping arches. They can behave either yieldingly or unyieldingly. If the normal force at any point of overlapping equals the slip resistance, the slide occurs. This paper presents a solution procedure for determining the load-carrying capacity of steel arch supports in the yielding implementation. This solution considers the effects of several significant elements, including differing materials and the number of clamps in yielding friction joints. The direct stiffness method is applied. The solution contains geometric, physical, and structural nonlinearity. The results obtained from numerical modeling using the provided procedure are compared to laboratory tests conducted at GIG Katowice in 2012. They show a good correlation with previously collected data from equivalent laboratory conditions.

• Membrane and Water Treatment
• /
• v.8 no.5
• /
• pp.449-462
• /
• 2017

Direct treatment of municipal wastewater by forward osmosis (FO) process was evaluated in terms of water flux decline, reverse salt diffusion, pollutants rejection and concentration efficiency by using synthetic seawater as the draw solution. It was found that when operating in PRO mode (active layer facing the draw solution), although the FO membrane exhibited higher osmotic water flux, more severe flux decline and reverse salt diffusion was also observed due to the more severe fouling of pollutants in the membrane support layer and accompanied fouling enhanced concentration polarization. In addition, although the water flux decline was shown to be lower for the FO mode (active layer facing the feed solution), irreversible membrane fouling was identified in both PRO and FO modes as the water flux cannot be restored to the initial value by physical flushing, highlighting the necessity of chemical cleaning in long-term operation. During the 7 cycles of filtration conducted in the experiments, the FO membrane exhibited considerably high rejection for TOC, COD, TP and $NH_4{^+}-N$ present in the wastewater. By optimizing the volume ratio of seawater draw solution/wastewater feed solution, a concentration factor of 3.1 and 3.7 was obtained for the FO and PRO modes, respectively. The results demonstrated the validity of the FO process for direct treatment of municipal wastewater by using seawater as the draw solution, while facilitating the subsequent utilization of concentrated wastewater for bioenergy production, which may have special implications for the coastline areas.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.311-315
• /
• 2006

Precision location and positioning of Asset within a network is an attractive feature with various applications, especially in indoor environments. Such a demand is met by the standard task group, IEEE 802.15.4a. Several methods, that is, pulse, chirp and chaotic communications have been proposed so far to satisfy the requirements of the standard. Among them, ultra wideband direct chaotic communications has advantageous features such as low hardware complexity, low cost, lower power consumption and flexible frequency band plan. In this paper, the feasibility of the ranging system using non-coherent chaotic transceiver is investigated by designing and implementing the system and the performance is proved by conducting location experiments in real indoor environments.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.105-106
• /
• 2002

An expanded scheme of direct numerical solution method for solving the Reynolds' equation in the boundary fitted coordinate systems for the gas lubrication with ultra low clearance is presented. Skewed slider is calculated by this scheme and results are compared to the original direct numerical solution. The modified scheme has advantages in stability in high compressibility number region. At the lower A region the difference in results of original and modified method is several percents.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.165.2-165.2
• /
• 2011

Dye to recent development such as increasing price of fossil fuels and energy offers such a solution. Wave energy supplies. Weve energy offers such a solution. Wave energy is the most consistent of all the intermittent renewable energy sources. In addition to this, very large energy fluxes occur in the ocean waves and by using appropriate wave energy converters the energy can be harnessed. The present study looks at utilizing a direct drive turbine of cross flow type to extract energy from ocean waves indirectly. This novel design incorporates a turbine in an enclosed in a closed tank. utilizing the energy generated from sloshing.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1634-1641
• /
• 2018

This study focuses on a high-performance direct active and reactive power controller design that is successfully applicable to three-phase pulse width modulation (PWM) AC/DC converters used in renewable distributed energy generation systems. The proposed controller can overcome the sluggish transient dynamic response of conventional controllers to rapid power command changes. Desired active and reactive powers can be thoroughly obtained at the end of each PWM period through a deadbeat solution. The proposed controller achieves an exact nonlinear cross-coupling decoupling of system power without using a predefined switching table or bang/bang hysteresis control. A graphical and analytical analysis that naturally leads to a control voltage vector selection is provided to confirm the finding. The proposed control strategy is evaluated on a 3 kW PWM AC/DC converter in the simulation and experiment.