• 디지털콘텐츠학회 논문지
• /
• 제18권3호
• /
• pp.509-516
• /
• 2017

본 연구의 목적은 유아음악교육에서 음원 사용의 실태, 디지털 음원 사용에 관한 사용 방법, 장점 및 이유, 단점 등을 파악하는데 있다. 연구대상은 유아음악교육에 관심을 가지고 활동에 참여하는 유아교사 8명으로 포커스 그룹 인터뷰를 통해 자료를 수집하였다. 연구 결과, [음원 사용 실태]는 <디지털 음원이 자주 사용됨>, <상황에 따라 직접 연주도 필요함>으로, [사용방법]은 <유료로 다운로드 후 카세트로 제공>, <노트북, 스마트폰으로 제공>으로, [사용 장점 및 사용 이유]는 <사용하기 편리함>, <연주하기 어려운 곡의 경우 요긴함>으로 [음원 사용 단점]은 <다양하지 못함>, <사용방법이 불편할 때도 있음>으로 주제가 분류되었다.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.91-98
• /
• 2004

Human uses level difference and time difference to get space information. Therefore this paper shows that method to presume direction of sound source by time difference and to mark presumed position. The position means direction from geometrical center of sensors to the sound source. To get the time difference of microphones input level, we will be explained about arrangement of microphones which used for the sensor to take the sound signal. It is included distance among the 3 microphones and distance between microphones and sound source. Secondly, input signals are transmitted to CPU througth digital process. CPU is used to DSP(Digital Signal Processor) for manage the signal by real time. Finally, the position of sound source is perceived by an explained algorithm in this paper.

• 제어로봇시스템학회논문지
• /
• 제13권10호
• /
• pp.983-989
• /
• 2007

Most of life thing including human being have tendency of reaction with inherently their own pattern against environmental change caused by such as light, sound, smell etc. Especially, a sense of direction often works as a very important factor in such reaction. Actually, human or animal lift that can react instantly to a stimulus determine their action with a sense of direction to a stimulant. In this paper, we try to propose how to give a sense of direction to a robot using sound being representative stimulant, and tracking sensors being able to detect the direction of such sound source. We also try to propose how to determine the relative directions among devices or robots using the digital compass and the RSSI on wireless network.

• 한국항해학회지
• /
• 제25권4호
• /
• pp.371-379
• /
• 2001

We have reported the new measurement system which was substituted digital filter for the analog filter in order to develop the optimal system that could find the time delay between each sensors with high accuracy. And also we have confirmed through the experiments that the accuracy of measurements were differentiated by the methods what kind of digital filter had been adopted. This paper suggests two algorithms which approximate the sound source's bearing and distance. One is that sound source's relative bearing can be approximately regarded as the gradient of hyperbolic asymptote, the other is that the source's range can be approximated under the condition of a long range source relative to the sensor's interval. And a series of experiments were carried out with the source's distance 22.42meters and the random bearing interval within the limits of $-90^{\circ}$~$+90^{\circ}$. As a result, we have recognized that the approximation methods could measure the bearing and distance with higher accuracy than the method using trigonometric relation could do.

• 한국항해학회지
• /
• 제24권5호
• /
• pp.443-450
• /
• 2000

Before some experiments were carried out with analog bandpass filter which used for filtering the noise included in sound source signal. And this filter was constituted by condenser, register and operational amplifier. Hut these elements made the phase characteristics to differentiate in each sensing channel and cause a little of measurement error. We made new measurement system that was substituted digital filter for the analog filter in order to develop the optimal system which could find the time delay between each sensors with high accuracy. This paper describes the new system's constitution and the function of each parts. Specially three digital filters were designed and applied to the digital signal processing Part. And a series of experiments were carried out with the source＇s distance 9.53meters and the random bearing interval within the limits of $0^{\circ}$ ~ $180^{\circ}$. As a result, we have recognized that the accuracy of measurements were differentiated by the methods what kind of digital filter were adopted. And we have confirmed the facts that IIR LPF was suitable for sound source's bearing measurement and FIR LPF reduced the range measurement error.

• 디지털산업정보학회논문지
• /
• 제10권4호
• /
• pp.161-170
• /
• 2014

Analog cassette tapes are easily changed due to environmental factors. To digitize is the best way to preserve a sound source. The way to digitize is to deal with the original sound to be enhanced to a variety of sources by playing through the audio card after recording. In this process to occur, it's the most important to remove various noise and equalizing sound in a method for preserving. It's studied about how to remove noise by using one of softwares, Cubase 5. 5, to remove hiss noise, which happens changing analog tape into digitalization. A amount of hiss noise is reduced to use X-Noise software of Wave which uses in Cubase 5.0, one of PLUG-IN. The noise is removed changing value of threshold and reduction every 10 times in no change of origin sound. To keep regular condition, the experiment to remove the hiss noise is conducted based on sound meondle, which is one of sound Nonmaegi. The noise is removed easily when the value of threshold is getting high in spite of giving a little value of reduction. However, as it gives a amount of reduction high, the damage rate of the sound source gets high.

• 한국항해학회지
• /
• 제22권4호
• /
• pp.31-36
• /
• 1998

The whistle is a very important information source for the safety navigation under foggy weather. But navigator has no concern about this, because it must be achived by human hearing sense and considered as a vague signal. If the range and relative bearing of signal source can be detected automatically, it would be very useful system for preventing marine casualties making a lot of economic loss and environment pollution. Before the algorithm of 2-dimensional sound source tracking system was reported. This paper describes the method that can obtain the time lag between three signals and the theory of cross-correlation analysis and subtraction method for cauculating the time lag by using the digital signal data sequences. And a series of experiments were carried out for various position of sound source in the range from 200cm to 530cm. As a result, we have recognized that sound source tracking system is possible to the sea field with improvement of position error.

• 한국항행학회논문지
• /
• 제10권3호
• /
• pp.250-255
• /
• 2006

디지털 멀티미디어 사회에서 음원은 과거 아날로그 방식에서 탈피하여 디지털 방식으로 생성, 저장 및 전송되는 음악 시스템이 주류를 이룬다. 이 과정에서 특정 규약에 따라 음악의 각종 정보를 위한 디지털 코드를 삽입해 놓는다면 음원분류 시스템이 내장된 Mp3 플레이어나 기타 디지털 음원 재생기에서 특정 곡의 선택, 분류등 여러 기능을 효율적으로 수행 할 수 있다. 본 논문에서는 기존의 음원에 정보 코드를 삽입하여 특정 재생기에서 개인이 원하는 방식으로 음악을 분류 및 검색할 수 있는 음원 분류 시스템을 구현하였다. 구현된 시스템을 이용하여 임의 장르에 대한 선별적 분류, 검색 실험 결과 제안한 방법의 타당성을 입증하였다.

• 한국중재학회지:중재연구
• /
• 제27권2호
• /
• pp.59-81
• /
• 2017

The purpose of this study is to find a solution to disputes in the process of producing digital music sources. At present, the center of the world music market including the domestic market has been completely transformed from the tangible musical record market to the intangible sound source market. Due to these environmental changes, the music production process becomes industrialized and specialized, causing conflicts of interest among the individuals in the process. First of all, this study examined changes in the music market which is the background of the dispute, identified the problems of the process and suggested solutions while summarizing the meaning and role of each process of producing a sound source that may arise during the sound production process. This study covers plagiarism between producers, copyright infringement of the creator against assistant creator caused by the industrialization and division of the production environment, issues related to the rights of sound engineers whose role and importance become bigger as acoustic technology develops and music genres become more diverse, and vertical hierarchy due to the formation of oligopoly by several distributors with huge capital. As a result of the study, it was concluded that Alternative Dispute Resolution (ADR) system is suitable for solving these problems. Specific methods of using ADR include activation of the dispute settlement system of the Korea Copyright Commission, active use of the arbitration clause specified in the standard contract, and recalculation of labor costs and earnings from copyright through mutual negotiations. This paper can be differentiated from previous studies in that it studied overall problems that might arise in the process of digital music source production and suggested ADR utilization as the solution.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.132-137
• /
• 2003

This paper concerns the prediction of railway noise propagation using scale model experiment in acoustics. In order to make acoustical experiment the digital signal processing technique are applied and spark discharge sound sources have been developed in which impulse response measured in 1/20 scale model railway. In the case of scale model experiment, it is difficult to realize sufficiently small size and directivity and to get sufficient sound energy and to get repeatability. Several type of Spark discharge sound source is made in laboratory. Experiment results are compared with the calculated results by the prediction model. As the results, it was found that railway noise could be predicted in acoustical scale model experiment using spark discharge sound source.