• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1325-1341
• /
• 1998

A conventional CBR channel is now capable of delivering several digitally compressed video programs due to recent advances in video compression, such as MPEG-2, and digital transmission technology. This paper presents a joint video coding scheme that is to maintain a constant sum of bit rates for all the programs but to allow the variable bit rate for individual program in the transimission environment mentioned above. Thus advantages of VBR video compression can be obtained. This paper contributes in two aspects. First, a rate-distortion estimation method for MPEG-2 video is proposed, which enavle us predict the amount of bits and the distortion generated from an encoded picture at a given quantization step size and vice versa. The most attractive features of the proposed rate-distortion estimation method are its accuracy and a computational complexity low enough to be applied to real-time video coding applications. Second, this paper presents an efficient and accurate joint rate control scheme using the rate-distortion estimation results and verifies its performance with experiments. The experimental results show that our coding scheme gives a significant gain even though a small number of video programs are coded jointly. For example, a stable picture quality is maintained among the video programs as well as within a program, and additional extra programs can be transmitted over the same channel bandwidth if the proposed joint video coding scheme is used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.21-31
• /
• 2017

In this paper, the Zynq system-on-chip (SoC) platform is used to design an adaptive noise reduction and edge-detection system using partial reconfiguration. Filters are implemented in a partially reconfigurable (PR) region to provide high computational complexity in real-time, 1080p video processing. In addition, partial reconfiguration enables better utilization of hardware resources in the embedded system from autonomous replacement of filters in the same PR region. The proposed edge-detection system performs adaptive noise reduction if the noise density level in the incoming video sequences exceeds a given threshold value. Results of implementation show that the proposed system improves the accuracy of edge-detection results (14~20 times in Pratt's Figure of Merit) through self-reconfiguration of filter bitstreams triggered by noise density level in the video sequences. In addition, the ZyCAP controller implemented in this paper enables about 2.1 times faster reconfiguration when compared to a PCAP controller.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.3
• /
• pp.273-281
• /
• 2002

Determination of sediment type is generally based on ground truthing. This method, however, provides information only for the limited sites. Recent developments of remote classification of seafloor sediments made it possible to obtain continuous profiles of sediment types. QTC View system, which is an acoustic instrument providing digital real-time seabed classification, was used to classify seafloor sediment types in the Suyoung Bay, Pusan. QTC View was connected to 50 kHz echo sounder, All parameters of QTC View and echo sounder are uniformly kept during survey. By ground truthing, the sediments are classified into seven types, such as slightly gravelly sand, slightly gravelly sandy mud, gravelly muddy sand, clayey sand, sandy mud, slightly gravelly muddy sand, and rocky bottom. By the first remote classification using QTC View, four sediment types are clearly identified, such as slightly gravelly sand, gravelly mud, slightly gravelly muddy sand, and rocky bottom. These are similar to the result of the second survey. Also the result of remote classification matches well with that of ground truthing, but for sediment type determined by minor component. Therefore, QTC View can effectively be used for remote classification of seafloor sediments.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.75-94
• /
• 2011

In this paper, we explore the information diffusion mechanism under social network environments by investigating the effect of message characteristics on the volume and speed of retweeting in Twitter, a popular online social media service. To this end, we select eight main keywords (i.e., '무상급식', '반값등록금', '나가수', '평창', '김연아', '박태환', '아이폰', '갤럭시') that have been popular on online social media in recent days. Each keyword represents various social aspects of Korea that recently grab people's attention such as political issues, entertainment, sports celebrities, and the latest digital products, and eventually holds distinctive message characteristics. Analyzing the frequency and velocity of retweeting for each keyword, we find that more than half of the sample messages posted on Twitter contain personal opinions for the certain keyword, but we also find that the tweets which include objective messages with hyperlink are the fastest ones when being retweeted by other followers. In overall, when being retweeted, the group of messages related to the certain keyword present distinctive diffusion patterns and speed according to message characteristics. From academic perspective, the findings in the study broaden our theoretical knowledge of information diffusion mechanism over online social media. For practitioners, the results also provide managerial implications regarding how to strategically utilize online social media for marketing communications with customers.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.64-68
• /
• 2007

This paper describes the development of RF front.end equipment of a wide band high precision satellite navigation receiver to be able to receive the currently available GPS navigation signal and the GALILEO navigation signal to be developed in Europe in the near future. The wide band satellite navigation receiver with high precision performance is composed of L - band antenna, RF/IF converters for multi - band navigation signals, and high performance baseband processor. The L - band satellite navigation antenna is able to be received the signals in the range from 1.1 GHz to 1.6 GHz and from the navigation satellite positioned near the horizon. The navigation signal of GALILEO navigation satellite consists of L1, E5, and E6 band with signal bandwidth more than 20 MHz which is wider than GPS signal. Due to the wide band navigation signal, the IF frequency and signal processing speed should be increased. The RF/IF converter has been designed with the single stage downconversion structure, and the IF frequency of 140 MHz has been derived from considering the maximum signal bandwidth and the sampling frequency of 112 MHz to be used in ADC circuit. The final output of RF/IF converter is a digital IF signal which is generated from signal processing of the AD converter from the IF signal. The developed RF front - end has the C/N0 performance over 40dB - Hz for the - 130dBm input signal power and includes the automatic gain control circuits to provide the dynamic range over 40dB.

• Korean Journal of Remote Sensing
• /
• v.33 no.2
• /
• pp.189-199
• /
• 2017

Thisstudy quantitatively analyzed the research trendsin the use ofICT ofthe environmental field using the text mining technique. To that end, the study collected 359 papers published in the past two decades(1996-2015)from the National Digital Science Library (NDSL) using 38 environment-related keywords and 16 ICT-related keywords. It processed the natural languages of the environment and ICT fields in the papers and reorganized the classification system into the unit of corpus. It conducted the text mining analysis techniques of frequency analysis, keyword analysis and the association rule analysis of keywords, based on the above-mentioned keywords of the classification system. As a result, the frequency of the keywords of 'general environment' and 'climate' accounted for 77 % of the total proportion and the keywords of 'public convergence service' and 'industrial convergence service' in the ICT field took up approximately 30 % of the total proportion. According to the time series analysis, the researches using ICT in the environmental field rapidly increased over the past 5 years (2011-2015) and the number of such researches more than doubled compared to the past (1996-2010). Based on the environmental field with generated association rules among the keywords, it was identified that the keyword 'general environment' was using 16 ICT-based technologies and 'climate' was using 14 ICT-based technologies.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.194-205
• /
• 2006

The purpose of this study is to develop a pedestrian multi-agent model and simulation system using multi-agent theory, which may be utilized as a planning support system for building a comfort and safe environment of pedestrian street. Differing from existing pedestrian models, however, every single pedestrian was regarded as an individual agent in the model. Multiple agents like multiple pedestrians in the street then maintain their own characteristics and respond to surrounding environment. In addition their moving behavior are made by their own decision rules that they have or had acquired through the interactive communications or learning between agents like real world. After verifying the model validation, as the $R^2$ between the predicted value and observed value was up to 0.781, the developed model was applied to Gazwa district within Gyeongsang university village. The simulation system was developed by Flash MX action scripts and the physical environment of the streets was configured with the digital map and ArcGis within computer virtual space. The attribute data of buildings such as type and size of commercial business were collected through the field survey and combined with physical features. Then the effect of the variation of building attractiveness and the occurrence of street events to pedestrian environment were simulated. Through the experiments this study could make suggestions to improve pedestrian environment.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.115-121
• /
• 2017

The present study aimed to obtain basic knowledge of a customized artificial joint based on the convergence research of Digital Imaging and Communications in Medicine(DICOM) and 5-axis machining technology. In the case of the research method, three-dimensional modeling was generated based on the medical image of the humerus bone, and the shape was machined using a chemical wood material. Then, the anatomical characteristics and the modeling machining computation times were compared. The results showed that the Stereolithography (STL) modeling required twice more time for semi-finishing and 10 times more time for finishing compared to the Initial Graphics Exchange Specification(IGES) modeling. For the 5-axis machining humerus bone, the anatomical structures of the anatomic neck, greater tubercle, lesser tubercle, and intertubercular groove were similar to those in the three-dimensional medical image. In the future, the convergence machining technology, where 5-axis machining of various structures(e.g., the surgical neck undercut of the humerus bone) is performed as described above, can be efficiently applied to the manufacture of a customized joint that pursues the precise model of a human body.

• Journal of The Korean Association of Information Education
• /
• v.17 no.3
• /
• pp.277-290
• /
• 2013

As the deployment of digital learning environment has been accelerating in rapid changes in information and communications technology, a tool is required to practically measure and evaluate the level of information education (IE) for freshmen in the University in order to propose an appropriate direction of IE in a teachers college. According to such current trends, ICT literacy is a tool to assess a specific level of capabilities such as a variety of real-world problem-solving skills, creativity, critical thinking, analytic reasoning, and communication skills. This study has developed a test tool to measure ICT literacy competence on the basis of the concept of test questions defined from the previous research. It was used to measure ICT literacy competence of 360 university freshmen of education and analyze if there is a difference among them depending on overall ICT literacy levels and genders, content areas, competence factors, and completion of IE course in high school. The result of this study would be expected to determine the current location of IE for freshmen in the University of Education and to be able to take advantage of basic data of the direction for IE course that university students need to essentially acquire in preparation for the coming future.

• Korean journal of communication and information
• /
• v.45
• /
• pp.341-383
• /
• 2009

Customer Relationship Management (CRM) in the media field is a specialcustomer-centered management method based on the information technology in order to build a long-term relationship with customers, users or subscripted people of media services. The purpose of this study is to examine and compare the various strategies and the characteristics of customer relationship managements of domestic media corporations in the era of the digital convergence. The data is analyzed by in-depth interviews with the CRM managements of newspapers, cable & satellite broadcasters and telecommunication corporations. The result of the study shows that the practicing CRM in the media field has an influence on the management performance and the management's support influences the practice of CRM. CRM is practiced differently according to the scale of the media corporations and revenue. Also the study presents that media corporations which wanted to improve CRM are going through trials and errors caused by the lack of experience of the CRM market in Korea. Therefore this study would provide CRM strategy for CRM marketers in Korea. Furthermore, this study presents concepts to media corporations which do not apply to CRM yet, and theoretical backgrounds which do. Finally, the implication of the study, limitations and problems are explained and discussed.