• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.36 no.2
• /
• pp.25-32
• /
• 2020

The purpose of this study is to estimate the economic value of architectural aesthetic using the contingent valuation method and to analyze the value-giving characteristics. The site survey was conducted based on the scenario of Dong-daemun Design Plaza, which is recognized as a work of outstanding architectural aesthetic. Based on 307 opinions collected, the main results are as follows: First, it could be confirmed that the higher the level of architectural aesthetic, the higher the payment amount was. The result of estimating the value of the architectural aesthetic on the basis of the fixed amount levy showed that the average payment amount was 8,859 won per person. The average payment amount was 13,014 won per person when the rejector of payment was excluded. The value of architectural aesthetic was about 13.72% of total construction cost. Second, free riding, which occurs mainly in the measurement of the value of public goods or environmental goods, appeared. This tendency is stronger in the elderly than in the younger, and in the differential amount levy than in the fixed amount levy. Third, the extreme subjectivity of architectural aesthetic value could be confirmed. While there are a lot of extreme denials of payments such as 0 won, the high-income was willing to pay a substantial amount. Fourth, it was confirmed that income factors was partly involved in the measured value.

• Korea Journal of Cosmetic Science
• /
• v.2 no.1
• /
• pp.1-10
• /
• 2020

Protection mechanisms for skin damage of ultraviolet (UV) absorbers in personal care products for protection against UV are well studied, but not for hair protection. The purpose of this study is to describe and compare the changes of physical property produced in human hair by doses of the UV-B exposure causing protein degradation. To observe the change of physical properties in hair, the experimental intensity of UV-B exposure has been established on the basis of statistical data from official meterological administration as daily one hour sunlight exposure for two weeks. Polysilicone-15, ethylhexyl methoxycinnamate (OMC), and octocrylene were employed for UV-B absorber, and those were treated to hair swatch by rubbing wash through shampoo and conditioner. Bending rigidity displayed kinetically successive reduction at high doses of UV exposure up to the 8,000 s, and exhibited different level at each sample of UV-B absorber. However, the values of Bossa Nova Technologies (BNT) for shinning factor were already saturable at the 2,000 s exposure except that treated with polysilicone-15. The differential scanning calorimetry (DSC) to measure a strength of inner protein produces a successive reduction of enthalpy as like a reduction of bending rigidity upon UV exposure. Surface roughness from lateral force microscope (LFM) acquired immediately after UV exposure show a saturable frictional voltage which has been also found in a saturable BNT data as the time of UV exposure increases. Through researching the DSC and the LFM, shinning of hair was much correlated to the protein damage at the surface, and bending rigidity could be regulated by the protein structural damage inside hair. Therefore, the optimization of efficient strategy for simultaneous prevention of hair protein on the surface and internal hair was required to maintain physical properties against UV.

• Advances in nano research
• /
• v.12 no.1
• /
• pp.25-35
• /
• 2022

Within the framework of the density functional theory combined with the method of non-equilibrium Green's functions (DFT + NEGF), the features of electron transport in fullerene nanojunctions, which are «core-shell» nanoobjects made of a combination of fullerenes of different diameters C₂₀, C₈₀, C₁₈₀, placed between gold electrodes (in a nanogap), are studied. Their transmission spectra, the density of state, current-voltage characteristics and differential conductivity are determined. It was shown that in the energy range of -0.45-0.45 eV in the transmission spectrum of the "Au-C₁₈₀-Au" nanojunction appears a HOMO-LUMO gap with a width of 0.9 eV; when small-sized fullerenes C₂₀, C₈₀ are intercalation into the cavity C₁₈₀ the gap disappears, and a series of resonant structures are observed on their spectra. It has been established that distinct Coulomb steps appear on the current-voltage characteristics of the "Au-C₁₈₀-Au" nanojunction, but on the current-voltage characteristics "Au-C₈₀@C₁₈₀-Au", "Au-(C₂₀@C₈₀)@C₁₈₀-Au" these step structures are blurred due to a decrease in Coulomb energy. An increase in the number of Coulomb features on the dI/dV spectra of core-shell fullerene nanojunctions was revealed in comparison with nanojunctions based on fullerene C₆₀, which makes it possible to create high-speed single-electron devices on their basis. Models of single-electron transistors (SET) based on fullerene nanojunctions "Au-C₁₈₀-Au", "Au-C₈₀@C₁₈₀-Au" and "Au-(C₂₀@C₈₀)@C₁₈₀-Au" are considered. Their charge stability diagrams are analyzed and it is shown that SET based on C₈₀@C₁₈₀-, (C₂₀@C₈₀)@C₁₈₀- nanojunctions is output from the Coulomb blockade mode with the lowest drain-to-source voltage.

• Journal of the Korean Society of Food Culture
• /
• v.21 no.2
• /
• pp.171-178
• /
• 2006

Tarakjuk with different amylose content was made up using roasted rice flours that consisted of the highest enzyme-resistant starch (RS), while differential scanning calorimetry (DSC) was also utilized to measure the gelatinization temperature of these roasted rice flours in order to establish cooking temperature of tarakjuk. The following qualities of tarakjuk with different amylose content were studied: color, viscosity, spreadability, starch fractions involving total starch (TS), rapidly digestible starch (RDS), slowly digestible starch (SDS) and RS, in vitro starch digestibility (IVSD) and sensory properties. During experimentation, it was found that as the amylose content of the rice flour decreased, the L value of tarakjuk decreased, whereas a value increased significantly (p<0.05). Also, while viscosity showed to increase significantly (p<0.05), on the opposite end, the property of spreadability decreased. TS ranged from $15.95{\sim}17.31%$, RDS $9.36{\sim}10.16%$, SDS $5.46{\sim}6.91%$ and RS $0.33{\sim}1.07%$, on a dry basis. Although the amylose content of rice flours decreased, IVSD increased, however showing no significant difference. When testing the sensory properties of tarakjuk, color and viscosity increased, whereas clumpiness decreased. Ilpum tarakjuk showed the highest score for nutty taste and overall acceptance levels. In fact a high correlation was shown between nutty taste and overall acceptance level (p<0.01), which leads one to believe that nutty taste is a prime factor that greatly influences overall acceptance. Furthermore, viscosity was positively correlated with both a and b values, however negatively correlated with L value (p<0.05). Moreover, roasted nutty taste and overall acceptance were positively correlated with a value (p<0.05), respectively. In conclusion, the above results suggest that tarakjuk could be made by choosing the appropriate rice flour based on the nutritional or sensory purpose.

• Journal of People, Plants, and Environment
• /
• v.22 no.3
• /
• pp.309-319
• /
• 2019

This study was conducted to investigate the effects of watching a virtual reality (VR) forest video on stress reduction in adults. Experiments were performed in an artificial climate chamber where temperature, humidity and illumination were controlled. To cause stress in subjects, the subjects were asked to multiply two digit numbers by one digit numbers for two minutes. The subjects then watched a VR forest video for five minutes. During the experiment, the heart rate variability (HRV) and heart rate (HR) of subjects were continuously measured for evaluating their physiological state. After measuring the baseline and watching a VR forest video, their psychological state was evaluated using the profile of mood state (POMS), semantic differential (SD) method, and positive affect and negative affect schedule (PANAS). The results of physiological evaluation after watching a VR forest video showed a decrease in the stress index and HR, an increase in the activity of the parasympathetic nervous system, and the standard deviation of normal to normal RR intervals (SDNN). The results of psychological assessment confirmed that watching a VR forest video induced "comfort", "natural", and "soothed" feelings in subjects. In addition, watching a VR forest video decreased "tension-anxiety (T-A)", "depression-dejection (D)", "anger-hostility (A-H)", "fatigue (F)", "total mood disturbance (TMD)", and increased "vigor (V)" compared to the base line, and decreased "negative affect" and increased "positive affect." These results indicate that watching a VR forest video decreases adults' stress index, stabilizes physiological state, and has a positive impact on psychological state. The findings of this study can serve as a basis for providing forest welfare services to people in the blind spots of forest welfare, and can lay a foundation for the adoption of VR, one of the technologies of the fourth industrial revolution in forestry.

• Structural Engineering and Mechanics
• /
• v.88 no.4
• /
• pp.389-403
• /
• 2023

In order to explore the influence of tooth root cracks on the dynamic characteristics of multi-stage planetary gear transmission systems, a concentrated parameter method was used to construct a nonlinear dynamic model of the system with 30-DOF in bending and torsion, taking into account factors such as crack depth, length, angle, error, time-varying meshing stiffness (TVMS), and damping. In the model, the energy method was used to establish a TVMS model with cracks, and the influence of cracks on the TVMS of the system was studied. By using the Runge- Kutta method to calculate the differential equations of system dynamics, a series of system vibration diagrams containing cracks were obtained, and the influence of different crack parameters on the vibration of the system was analyzed. And vibration testing experiments were conducted on the system with planetary gear cracks. The results show that when the gear contains cracks, the TVMS of the system will decrease, and as the cracks intensify, the TVMS will decrease. When cracks appear on the II-stage planetary gear, the system will experience impact effects with intervals of rotation cycles of the II-stage planetary gear. There will be obvious sidebands near the meshing frequency doubling, and the vibration trajectory of the gear will also become disordered. These situations will become more and more obvious as the degree of cracks intensifies. Through experiments, the theoretical results are in good agreement with experimental results, verifying the correctness of the theoretical model. This provides a theoretical basis for fault diagnosis and reliability research of the system.

• Structural Engineering and Mechanics
• /
• v.90 no.4
• /
• pp.325-343
• /
• 2024

Triple-tower double-cable suspension bridges have increased confinement stiffness imposed by the main cable on the middle tower, which has bright application prospects. However, vertical bending and torsional vibrations of the double-cable and the girder are coupled in such bridges due to the hangers. In particular, the bending vibration of the towers in the longitudinal direction and torsional vibrations about the vertical axis influence the vertical bending and torsional vibrations of the stiffening girders, respectively. The conventional analytical algorithm for assessing the dynamic features of the suspension bridge is not directly applicable to this type of bridge. This study attempts to mitigate this problem by introducing an analytical algorithm for solving the triple-tower double-cable suspension bridge's natural frequencies and mode shapes. D'Alembert's principle is employed to construct the differential equations of the vertical bending and torsional vibrations of the stiffening girder continuum in each span. Vibrations of stiffening girders in each span are interrelated via the vibrations of the main cables and the bridge towers. On this basis, the natural frequencies and mode shapes are derived by separating variables. The proposed algorithm is then applied to an engineering example. The natural frequencies and mode shapes of vertical bending and torsional vibrations derived by the analytical algorithm agreed well with calculations via the finite element method. The fundamental frequency of vertical bending and first- and second-order torsion frequencies of double-cable suspension bridges are much higher than those of single-cable suspension bridges. The analytical algorithm has high computational efficiency and calculation accuracy, which can provide a reference for selecting appropriate structural parameters to meet the requirements of dynamics during the preliminary design.

• Fire Science and Engineering
• /
• v.26 no.6
• /
• pp.99-108
• /
• 2012

These days, spontaneous ignition phenomena by oxidizing heat frequently occur in the circumstances of processing and storing waste tires. Therefore, to examine the phenomena, in this work, this researcher conducted the tests of fires of fragmented waste tires (shredded tire), closely investigated components of the fire residual materials collected in the processing and storing place, and analyzed the temperature of the starting of the ignition, weight loss, and heat of reaction. For the study, this researcher conducted fire tests with fragmented waste tires in the range of 2.5 mm to 15 mm, whose heat could be easily accumulated, and performed heat analysis through DSC and TGA, DTA, DTG, and GC/MS to give scientific probability to the possibility of spontaneous ignition. According to the tests, at the 48-hour storage, rapid increase in temperature ($178^{\circ}C$), Graphite phenomenon, smoking were observed. And the result from the DTA and DTG analysis showed that at $166.15^{\circ}C$, the minimum weight loss occurred. And, the result from the test on the waste tire analysis material 1 (Unburnt) through DSC and TGA analysis revealed that at $180^{\circ}C$ or so, thermal decomposition started. As a result, the starting temperature of ignition was considered to be $160^{\circ}C$ to $180^{\circ}C$. And, at $305^{\circ}C$, 10 % of the initial weight of the material reduced, and at $416.12^{\circ}C$, 50 % of the intial weight of the material decreased. The result from the test on oxidation and self-reaction through GC/MS and DSC analysis presented that oxidized components like 1,3 cyclopentnadiene were detected a lot. But according to the result from the heat analysis test on standard materials and fragmented waste tires, their heat value was lower than the basis value so that self-reaction was not found. Therefore, to prevent spontaneous ignition by oxidizing heat of waste tires, it is necessary to convert the conventional process into Cryogenic Process that has no or few heat accumulation at the time of fragmentation. And the current storing method in which broken and fragmented materials are stored into large burlap bags (500 kg) should be changed to the method in which they are stored into small burlap bags in order to prevent heat accumulation.

• Asia pacific journal of information systems
• /
• v.18 no.4
• /
• pp.105-130
• /
• 2008

Consumers of e-learning market differ from those of other markets in that they are replaced in a specific time scale. For example, e-learning contents aimed at highschool senior students cannot be consumed by a specific consumer over the designated period of time. Hence e-learning service providers need to attract new groups of students every year. Due to lack of information on products designed for continuously emerging consumers, the consumers face difficulties in making rational decisions in a short time period. Increased uncertainty of product purchase leads customers to herding behaviors to obtain information of the product from others and imitate them. Taking into consideration of these features of e-learning market, this study will focus on the online herding behavior in purchasing e-learning contents. There is no definite concept for e-learning. However, it is being discussed in a wide range of perspectives from educational engineering to management to e-business etc. Based upon the existing studies, we identify two main view-points regarding e-learning. The first defines e-learning as a concept that includes existing terminologies, such as CBT (Computer Based Training), WBT (Web Based Training), and IBT (Internet Based Training). In this view, e-learning utilizes IT in order to support professors and a part of or entire education systems. In the second perspective, e-learning is defined as the usage of Internet technology to deliver diverse intelligence and achievement enhancing solutions. In other words, only the educations that are done through the Internet and network can be classified as e-learning. We take the second definition of e-learning for our working definition. The main goal of this study is to investigate what factors affect consumer intention to purchase e-learning contents and to identify the differential impact of the factors between consumers with purchase experience and those without the experience. To accomplish the goal of this study, it focuses on herding behavior and perceived usefulness as antecedents to behavioral intention. The proposed research model in the study extends the Technology Acceptance Model by adding herding behavior and usability to take into account the unique characteristics of e-learning content market and e-learning systems use, respectively. The current study also includes consumer experience with e-learning content purchase because the previous experience is believed to affect purchasing intention when consumers buy experience goods or services. Previous studies on e-learning did not consider the characteristics of e-learning contents market and the differential impact of consumer experience on the relationship between the antecedents and behavioral intention, which is the target of this study. This study employs a survey method to empirically test the proposed research model. A survey questionnaire was developed and distributed to 629 informants. 528 responses were collected, which consist of potential customer group (n = 133) and experienced customer group (n = 395). The data were analyzed using PLS method, a structural equation modeling method. Overall, both herding behavior and perceived usefulness influence consumer intention to purchase e-learning contents. In detail, in the case of potential customer group, herding behavior has stronger effect on purchase intention than does perceived usefulness. However, in the case of shopping-experienced customer group, perceived usefulness has stronger effect than does herding behavior. In sum, the results of the analysis show that with regard to purchasing experience, perceived usefulness and herding behavior had differential effects upon the purchase of e-learning contents. As a follow-up analysis, the interaction effects of the number of purchase transaction and herding behavior/perceived usefulness on purchase intention were investigated. The results show that there are no interaction effects. This study contributes to the literature in a couple of ways. From a theoretical perspective, this study examined and showed evidence that the characteristics of e-learning market such as continuous renewal of consumers and thus high uncertainty and individual experiences are important factors to be considered when the purchase intention of e-learning content is studied. This study can be used as a basis for future studies on e-learning success. From a practical perspective, this study provides several important implications on what types of marketing strategies e-learning companies need to build. The bottom lines of these strategies include target group attraction, word-of-mouth management, enhancement of web site usability quality, etc. The limitations of this study are also discussed for future studies.

• Journal of Korean Academy of Nursing Administration
• /
• v.4 no.2
• /
• pp.307-319
• /
• 1998

This study is an empirical investigation and study on the measurement of nursing service quality as perceived by patients. A series of H1. H2. H3 alternative hypotheses were tested using a sample of 250 patients in Taegu City. Korea. HI hypothese were tested for application of five component of service quality (SERVQlTAL and SE RPERF : tangiblity. reliability. responsiveness. accessibility. understandability) in Taegu area Hospitals. Validity test - the five components of service quality were rearranged into two components of service quality (personal factor. nonpersonal factor). Although SERVQUAL was verified in USA. application for five components of service quality in Korea indicated that it need more analytical studies. Nobody can deny the fact that the recent growth of the nursing service quality is one of the most important driving forces of hospital management. In many hospitals. the nursing quality charges more than 50% of the medical service quality. As a result. many hospital managers should be enormous interests in the investment potentiality of the nursing service. However. doesn't many researchers invest their time and effort on the research of the quality control in nursing service. Nursing service management is the process to satisfy customer's desires and expectations through the various service activities. Presently nursing service are being faced with three Common tasks of improving quality of nursing service. competitively differential advantage and productivity because of quantitative expansion of Nursing service. Such a phenomenon is also found in our medical service industry. resulting from increasing demands for medical service owing to national medical insurance policy and consumer's attitude change emphasizing prevention of illness. excessiveness of medical facilities in large cities and increasing medical lawsuits due to influence of consumerism. Therefore. under such circumstances. this research on nursing service is conducted from nursing managements to improve the nursing service quality problems faced by medical institutions. The results of this theoretical/empirical research are as follows: 1. Nursing service Quality is regarded as patients' perceived quality and evaluated on the basis (5 dimension) of technical and functional quality. 2. Nursing service Quality is a concept of patients evaluation on the measurable multi-dimensions intrinsic and extrinsic attributes of service. 3. Nursing service Quality is conceptually defined as the difference between the perceived service and the expected service. 4. Korean consumers trend to evaluate nursing service quality based on such dimensions as responsiveness and reliability. understandability. accessibility. tangibility. 5. After analyzing whether or not there are some differences in respective medical institution. it was found that there are significant difference on understandability. reliability. communicability. courtesy. competence. 6. After analyzing the difference between the expected nursing service and the nursing perceived service, it was found that the expected nursing service is higher than the perceived service in every medical institution. 7. HI hypothesis was tested with regard to the validity test between SERVQUAL and SERVPERF in nursing service quality. The result of validity test between SERVQUAL and SERVPERF was found to have differential result. That is the R2 of SERVPERF is higher than that of SERVQUAL. Therefore. HI was verified in nursing management. H2. H3 hypotheses were tested whether or not the nursing service quality and patient satisfaction is the preceding variable. The result of H2 hypothes is that the nursing service quality is the preceding variable of patient satisfaction and the patient satisfaction is that of revisiting intention. After analyzing whether or not there is any differences on the demographic variable of five nursing service quality factor. it was found that there are statistically significant differences on communicability and courtesy at the sex. understand ability. accessibility and tangibility at the age. understandability at the academic background respectively.