• Steel and Composite Structures
• /
• v.28 no.2
• /
• pp.223-231
• /
• 2018

Nowadays, there are a great number of various structures that have been retrofitted by using different FRP Composites. Due to this, more researches need to be conducted to know more the characteristics of these structures, not only that but also a comparison among them before and after the retrofitting is needed. In this research, a model steel structure is tested using a bench-scale earthquake simulator on the shake table, using recorded micro tremor data, in order to get the dynamic behaviors. Columns of the model steel structure are then retrofitted by using GFRP composite, and then tested on the Quanser shake table by using the recorded micro tremor data. At this stage, it is needed to evaluate the dynamic behaviors of the retrofitted model steel structure. Various types of methods of OMA, such as EFDD, SSI, etc. are used to take action in the ambient responses. Having a purpose to learn more about the effects of GFRP composite, experimental model analysis of both types (retrofitted and no-retrofitted models) is conducted to evaluate their dynamic behaviors. There is a provision of ambient excitation to the shake table by using recorded micro tremor ambient vibration data on ground level. Furthermore, the Enhanced Frequency Domain Decomposition is used through output-only modal identification. At the end of this study, moderate correlation is obtained between mode shapes, periods and damping ratios. The aim of this research is to show and determine the effects of GFRP Composite implementation on structural responses of the model steel structure, in terms of changing its dynamical behaviors. The frequencies for model steel structure and the retrofitted model steel structure are shown to be 33.916% in average difference. Finally, it is shown that, in order to evaluate the period and rigidity of retrofitted structures, OMA might be used.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.7
• /
• pp.957-966
• /
• 2000

The effect of rotation on the discharge coefficient of orifices with various length-to-diameter ratios and two different inlet corner radii was studied. Length-to-diameter ratios of the orifices range from 0.2 to 10, while the inlet shapes are square edged, or round edges of radius-to-diameter ratio of 0.5. From the experiment, we found that rotational discharge coefficient and Rotation number, when based on ideal exit velocity of the orifice considering momentum transfer from the rotor, describe the effect of rotation very well. In this study, the discharge coefficients of rotating orifices are shown to behave similar to those of the well-known non-rotating orifices. For both rotating and non-rotating orifices, the discharge coefficients increase with the length-to-diameter ratio until a maximum is reached. The flow reattachments in the relatively short orifices are responsible for the increase. The coefficient then decreases with the length-to-diameter ratio due to the friction loss along the orifice bore. The length-to-diameter ratio that yields maximum discharge coefficient, however, increases with the Rotation number because the increased flow-approaching angle requires larger length-to-diameter ratio for complete reattachment. The length-to-diameter ratio for complete reattachment is shorter for round edged orifices than that of square edged orifices by about a unit length-to-diameter ratio.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.10
• /
• pp.925-931
• /
• 2010

The paper describes a Large Eddy Simulation (LES) study of turbulent flow around a cavity. A series of three-dimensional cavities placed in a turbulent boundary layer are simulated at a Reynolds number of $1.0{\times}10^5$ by considering U and h, which represent the velocity at the top and the depth of the cavity, respectively. In order to obtain the appropriate solution for the filtered Navier-Stokes equation for incompressible flow, the computational mesh forms dense close to the wall of the cavity but relatively coarse away from the wall; this helps reduce computation cost and ensure rapid convergence. The Boussinesq hypothesis is employed in the subgrid-scale turbulence model. In order to determine the subgrid-scale turbulent viscosity, the Smagorinsky-Lilly SGS model is applied and the CFL number for time marching is set as 1.0. The results show the flow variations inside cavities of different sizes and shapes.

• Journal of Magnetics
• /
• v.12 no.3
• /
• pp.97-102
• /
• 2007

We have investigated the electronic structures and magnetism of a full Heusler alloy $Co_2CrGa(001)$ surface by using the all-electron full-potential linearized augmented plane wave (FLAPW) method within the generalized gradient approximation (GGA). We considered two types of different terminations: the Co-terminated (Co-Term) and the CrGa-terminated (CrGa-Term) surfaces. From the calculated layer-projected density of states (LDOS), we found that the surface of the CrGa-Term shows nearly half-metallic character while that of the Co-Term is far from the half-metallic. For the Co-Term, the surface Co atom moves down to the bulk region by $0.05{\AA}A$, while the subsurface Cr and Ga atoms move up to the surface layer by 0.05 and $0.01{\AA}$, respectively. For the CrGa-Term, there is a large inward relaxation of the surface Ga atom $(0.07{\AA})$, but the relaxation of the surface Cr atom is very small $(0.01{\AA})$. The relaxations affect not much to the overall shapes of DOS for both terminations, but make the surface states of the surface Cr and Ga atoms for the CrGa-Term shift to higher energy that enhances the nearly half-metallic character of the CrGa-Term. The magnetic moments of the surface $Cr(2.98{\mu}_B)$ in the CrGa-Term and the surface $Co(1.17{\mu}_B)$ in the Co-Term were much increased compared to those of the inner-layers $(1.79\;and\;0.77{\mu}_B)$, respectively, while that of the subsurface Cr atom in the Co-Term was decreased to $1.19{\mu}_B$.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.4
• /
• pp.20-30
• /
• 2001

This study represents the Nondestructive Test about impact damage of composite materials made by different lay-up patterns and degrees. For this study, they were examined by the drop test on composite materials of two type lap-up patterns with fabric and unidirectional prepreg and examined nondestructive test of those. Nondestructive methods were X-ray test with $ZnI_2$ penetrant and Ultrasonic C-scan. The defect detectability of X-ray and Ultrasonic test was compared according to defect species. And the amounts of damage on impacted zone wert compared according to impact energy on two type test specimens. At results, Ultrasonic test was more effective to detect delamination and Penetrant X-ray test was more effective to detect matrix crack and fiber fracture. There were some differences in defect shapes and grades according to lay-up patterns and degrees, and the trend appeared that matrix crack, delamination, fiber fracture occured and increasing defects sizes according to increasing impact energy.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.195-202
• /
• 2005

An adaptive segmentation algorithm is used to efficiently target decisions in local non-stationary images. Until now, several adaptive approaches have been proposed as a method of segmentation. However, they can't be directly used for radar target detection because a radar signal has different characteristics from general images. Generally, a histogram of radar signal shows that targets have a relatively small number of frequency functions compared to the background and distribution of background, which have several shapes as the environment changes. In this paper, we propose an adaptive segmentation algorithm using a histogram chord which is a right-down line from maximum pick of frequency function. The proposed method provides thresholds which are optimum for several radar environments because the used chord for threshold search is not significantly effected by interference conditions. Simulation results show that the proposed method is superior to the traditional algorithms, global threshold method and distribution median method, with respect to detection performance.

• Journal of Korean Academy of Nursing
• /
• v.40 no.6
• /
• pp.775-784
• /
• 2010

Purpose: The study was conducted to describe body shapes of school age children using the degree of obesity index (DOI) and body mass index obesity index classified by the Ministry of Education, Science and Technology (M-BOI) and Seoul Metropolitan Office of Education (S-BOI). Methods: In this cross sectional descriptive study health screening data for school children collected in 2007 was used. Results: Data were analyzed for 2,193 4th-6th grade boys (52%) and girls who attended 4 schools in rural areas. DOI determined that only 44.3% of students had average weight. This proportion was much lower than the results of other methods (74.3-77.6%). All three methods defined girls (51.3-61.8%) as skinnier than boys. Skinny and average body shaped children classified by DOI and obese children classified by S-BOI were heavier and taller and presented higher degrees of obesity (DO) and BMI scores than by other methods. M-BOI and S-BOI presented statistically significant positive correlations with weight, height, DO and BMI, while DOI was not correlated with height. Conclusion: BMI based body shape classifications provide a more rigorous classification of body shape which are favorable for school health professionals with limited resources and policy makers for internationally comparable references.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.5
• /
• pp.61-66
• /
• 2010

A stereo vision, which is based on two or more images taken from different view points, is able to build three dimensional maps of its environment having various applications including robots and home networks. SAD algorithm, which is based on area-based correlation, is widely used since its regular structure provide abundant parallelism. In this paper, we present heuristic designs of SAD algorithm to meet the demands on accuracy and resource usages in various applications. The disparity abridgement and the window abridgement algorithms can be used for vision systems in low cost and small size. The window shape algorithm can be applicable when object are in specific shapes. The adaptive window algorithm work well when accuracy is the primary concern.

• Journal of Korean Association for Spatial Structures
• /
• v.4 no.4 s.14
• /
• pp.113-128
• /
• 2004

A three-dimensional (3-D) method of analysis is presented for determining the free vibration frequencies and mode shapes of solid paraboloidal and complete (that is, without a top opening) paraboloidal shells of revolution with variable wall thickness. Unlike conventional shell theories, which are mathematically two-dimensional (2-D), the present method is based upon the 3-D dynamic equations of elasticity. The ends of the shell may be free or may be subjected to any degree of constraint. Displacement components $u_r,\;u_{\theta},\;and\;u_z$ in the radial, circumferential, and axial directions, respectively, are taken to be sinusoidal in time, periodic in ${\theta}$, and algebraic polynomials in the r and z directions. Potential (strain) and kinetic energies of the paraboloidal shells of revolution are formulated, and the Ritz method is used to solve the eigenvalue problem, thus yielding upper bound values of the frequencies by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Convergence to four digit exactitude is demonstrated for the first five frequencies of the complete, shallow and deep paraboloidal shells of revolution with variable thickness. Numerical results are presented for a variety of paraboloidal shells having uniform or variable thickness, and being either shallow or deep. Frequencies for five solid paraboloids of different depth are also given. Comparisons are made between the frequencies from the present 3-D Ritz method and a 2-D thin shell theory.

• The Research Journal of the Costume Culture
• /
• v.19 no.1
• /
• pp.214-229
• /
• 2011

The purpose of this study is to find strategic methods of quality management for customer satisfaction when developing clothing for middle and elderly women. For this study was middle and elderly women who were living in Seoul and Kyonggi-do. SPSS 11.5 statistical program was used for data analysis and to conduct factor analysis, reliability verification, paired-sample t-test, frequency analysis and percentage. The result were as follows; First, middle and elderly women's behavioral characteristic in purchasing clothing, the average price of formal suit was 700 thousand won and the time for purchasing was less than 3 months. They tended to purchase mostly by themselves on their own, and they purchase their own formal suit. Second, The body parts that influence the fit the most are in the order of waist circumference, shoulder width, chest circumference. Third, Regarding the difference of importance and satisfaction on the fit by body part that the middle and elderly women by body part, there was no significant different in neck circumference and shoulder swerve. Overweighing middle and elderly women showed difference in importance and satisfaction on all body parts. Underweighing middle-aged to aged women showed a significant difference in importance and satisfaction in the order of circumference of hips. Fourth, middle-aged women in 50s showed higher importance than satisfaction in the order of waist circumference, and elderly women in 60s should higher importance than satisfaction in rise length, jacket length. Aged women in 70s and above should significant difference only in the height of collar.