• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.5
• /
• pp.74-84
• /
• 1996

Dynamic loading of structures often causes excursions of stresses well into the inelastic range and the influence of geometric changes on the dynamic response is also significant in many cases. Therefore, both material and geometric nonlinearity effects should be considered in case that a dynamic load acts on the structure. For developing a program to analyze the dynamic response of an axisymmetric shell in this study, the material nonlinearity effect on the dynamic response was formulated by the elasto-viscoplastic model highly corresponding to the real behavior of the material. Also, the geometrically nonlinear behavior is taken into account using a total Lagrangian coordinate system, and the equilibrium equation of motion was numerically solved by a central difference scheme. A complete finite element program has been developed and the results obtained by it are compared with those in the references 1 and 2. The results are in good agreement with each other. As a case study of its application, the developed program was applied to a dynamic response analysis of a nuclear reinforced concrete containment structure. The results obtained from the' numerical examples are summarized as follows : 1. The dynamic magnification factor of the displacement and the stress were unrelated with the concrete strength. 2. As shown by the results that the displacement dynamic magnification factor were form 1.7 to 2.3 and the stress dynamic magnification factor from 1.8 to 2.5, the dynamic magnification factor of stress were larger than that of displacement. 3. The dynamic magnification factor of stress on the exterior surface was larger than that on the interior surface of the structure.

• Journal of KIISE:Databases
• /
• v.34 no.6
• /
• pp.518-527
• /
• 2007

It is an important issue to find out the difference between RDF documents, because RDF documents are changed frequently. When RDF documents contain blank nodes, we need a matching technique for blank nodes in the change detection. Blank nodes have a nested form and they are used in most RDF documents. A RDF document can be modeled as a graph and it will contain many subtrees. We can consider a change detection problem as a minimum cost tree matching problem. In this paper, we propose a change detection technique for RDF documents using the labeling scheme for blank nodes. We also propose a method for improving the efficiency of general triple matching, which used predicate grouping and partitioning. In experiments, we showed that our approach was more accurate and faster than the previous approaches.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.4
• /
• pp.535-543
• /
• 2002

In this paper, we propose $\pi$/8 shift 8PSK and trellis-coded $\pi$/8 shift 8PSK-OFDM techniques by applying $\pi$/4 shift QPSK to trellis-coded modulation (TCM), and performing signal set expansion and set partition correspondingly based on phase difference. In our Viterbi decoding algorithm, up to L phase differences from successively received symbols are employed in the new branch metrics. Such sliding multiple symbol detection (SMSD) method provides improved bit-error-rate (BER) performance in the differential detection of the trellis-coded $\pi$/8 shift 8PSK-OFDM signals. The performance improvements are achieved for different communication channels without sacrificing bandwidth and power efficiency. It thus makes the proposed modulation and sliding detection scheme more attractive for power and band-limited systems.

• Journal of Korea Multimedia Society
• /
• v.3 no.1
• /
• pp.53-62
• /
• 2000

Digital watermarking has been considered as an important technique to protect the copyright of digital content. It is essential that a watermark embedded in a still or moving image resists against various attacks ranging from compression, filtering to cropping. In particular, as JPEG is a dominant still image compression standard for Internet applications, digital watermarking methods that are robust against the JPEG compression are especially required. Most digital watermarking methods proposed so far work by modulating pixels/coefficients without considering the quality level of JPEG, which renders watermarks readily removable. In this paper, we proposed a new digital watermarking method as follows. For providing the robustness against JPEG, the quality level of JPEG is used as parameter on watermarking so as to compute the loss of image caused by JPEG compression and we compute the difference of an original image resulted from JPEG compression. Also in proposed method, we compute the visual components that are derived from the information of edge within image and consideration of brightness discrimination which is one of human visual system's properties. Thus, we proposed new watermarking scheme that after constructing a watermark by considering the loss of image resulted from JPEG compression and visual components derived from the human visual system, the watermark is embedded into the image.

• Journal of Korea Multimedia Society
• /
• v.11 no.10
• /
• pp.1325-1337
• /
• 2008

The difference of environments between training and recognition is the major reason of degradation of speech recognition. To solve this mismatch of environments, various noise processing methods have been studied. Among them, ERN(log-Energy dynamic Range Normalization) and SEN(Silence Energy Normalization) for normalization of log energy features show better performance than others. However, these methods have a problem that they can hardly achieve normalization for the relatively higher values of log energy features and the environmental mismatch caused by this problem becomes bigger especially in low SNR environments. To solve these problems, we propose applying ARMA filter as post-processing for smoothing log energy features by calculating the moving average in auto-regression scheme. From the recognition results conducted on Aurora 2.0 DB, the proposed method shows improved recognition results comparing with conventional methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1312-1317
• /
• 2013

Pseudolite is a contraction of the term "pseudo-satellite", used to refer to something that is not a satellite which performs a function commonly in the domain of satellites. Pseudolite are most often small transceivers that are used to create a local, ground-based GPS alternative. Pseudo-range measurement of pseudolite has around 300m range error, when time synchronization error of $1{\mu}sec$ occurs. Therefore the time synchronization methods play an important part in navigation augmentation using pseudolite. This paper proposes three clock synchronization methods that are installation method of pseudolite station, method using KRISS-UTC and method using PRN code phase difference for pseudolite. The simulation platform structure is presented for evaluating proposed clock synchronization performance.

• The KIPS Transactions:PartB
• /
• v.9B no.1
• /
• pp.47-56
• /
• 2002

In the distributed multimedia document system, media objects distributed over a computer network are retrieved from their sources and presented to users according to specified temporal relations. For effective presentation, synchronization has to be supported. Furthermore, since the presentation in the distributed environment is influenced by the network bandwidth and delay, they should be considered for synchronization. This paper proposes a distributed multimedia presentation system that performs presentation effectively in the distributed environment. And it also suggests a method to supports synchronization, in which, network situation and resources are monitored when media objects are transferred from servers to a client. Then a feedback message for the change of them is sent to the server so that the server might adjust the data sending rate to control synchronization. To monitor the situation of network, we use two methods together. One is to manage the level of the buffer by setting thresholds on a buffer and the other is to check the difference between the sending time of a packet from the server and the arrival time of the packet to the client.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1363-1372
• /
• 2011

Flooding based routing protocols are usually used to disseminate information in wireless sensor networks. Those approaches, however, require message retransmissions to all nodes and induce huge collision rate and high energy consumption. In this paper, HoGoP (Hop based Gossiping Protocol) in which all nodes consider the number of hops from sink node to them, and decide own gossiping probabilities, is introduced. A node can decide its gossiping probability according to the required average reception percentage and the number of parent nodes which is counted with the difference between its hop and neighbors' ones. Therefore the decision of gossiping probability for network topology is adaptive and this approach achieves higher message reception percentage with low message retransmission than the flooding scheme. Through simulation, we compare the proposed protocol with some previous ones and evaluate its performance in terms of average reception percentage, average forwarding percentage, and forwarding efficiency. In addition, average reception percentage is analyzed according to the application requirement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1B
• /
• pp.11-16
• /
• 2007

This paper describes the design and performance of a secure routing protocol with time-space cryptography for mobile ad-hoc networks. The proposed time-space scheme works in the time domain for key distribution between source and destination as well as in the space domain for intrusion detection along the route between them. For data authentication, it relies on the symmetric key cryptography due to high efficiency and a secret key is distributed using a time difference from the source to the destination. Also, a one-way hash chain is formed on a hop-by-hop basis to prevent a compromised node or an intruder from manipulating the routing information. In order to evaluate the performance of our routing protocol, we compare it with the existing AODV protocol by simulation under the same conditions. The proposed protocol has been validated using the ns-2 network simulator with wireless and mobility extensions.

• Journal of Korean Society of Rural Planning
• /
• v.7 no.1 s.13
• /
• pp.61-76
• /
• 2001

During the performance of large scale tidal land reclamation project along the coast line, the construction of large scale structures such as sea-dikes, closing estuaries will induce big changes of near-shore hydraulic behavior. In this paper, its is aimed to verify the change of tide and currents after the construction of sea-dike of the Saemangeum project along the coast line. Numerical scale model "TRISULA" which development by Delft Hydraulics in the Netherlands was used. "TRISULA" is adopting the finite difference numerical scheme, and mostly using for hydro-dynamic solution along the sea and estuaries. Model boundary is covering $100{\times}170$ Km and constructed with $133{\times}337$ grids. Outer side boundary is divided 48 sections, and input 37 tidal components are gained from another big scale numerical "Yellow Sea" model. Model calibrations & verifications were performed th field tide & current datas which were measured along sea-dike alignment during Aug. $1997{\sim}Apr$. 1999. And then, numerical simulation with the tide condition dated 17 Apr. 1999 was performed with & without sea-dike construction condition for the comparison. Evaluated boundary is 20 km out-side from sea-dike alignment. Four cross lanes were set up, each of lane contains 3 points, for the comparison of sea-dike construction effects. Results showing the tidal amplitude is reducing approximately 20 cm after the construction of sea-dike during spring tide condition, amplitude 6.9m. Currents after construction of sea-dikes along the alignment, the northern part shows 50%(inner), 90%(outer) and the southern part shows 10%(inner) 50%(outer) of the currents before construction.