• Journal of the Korean Vacuum Society
• /
• v.18 no.6
• /
• pp.481-487
• /
• 2009

To control the diameter size of the carbon nanofilaments (CNFs), SF6 was incorporated in the source gases ($C_2H_2/H_2$) during the initial deposition stage. The source gases and $SF_6$ were manipulated as the cyclic on/off modulation of $C_2H_2/H_2/SF_6$ flow in a thermal chemical vapor deposition system. The characteristics of the CNFs formation on the substrate were investigated according to the different cyclic modulation processes and the substrate temperatures. By $SF_6\;+\;H_2$ flow injection during the cycling etching interval time, the diameter size of CNFs was extremely decreased. The cause for the decrease in the diameter size of the individual CNFs by the cyclic on/off modulation process of $C_2H_2/H_2/SF_6$ flow was discussed in association with the slightly enhanced etching ability by the incorporation of $SF_6$.

• Journal of IKEEE
• /
• v.19 no.2
• /
• pp.133-141
• /
• 2015

The IMS is an architectural control framework for delivering IP multimedia services such as voice, video, audio and data, the IMS supports not only the mobile communication system but also the existing wired and wireless network based on IP. The network that is integrated by the IMS needs policy-based network management protocol for managing the limited network resources to provide efficient multimedia service. The IMS use additional device called PDF for efficient resource management, but the PDF only uses diameter which is one of the network management protocol such as SNMP and COPS. Many devices use various protocol to manage the limited network resources. There is an algorithm using a variety of protocols such as Diameter, COPS and SNMP to handle the resources management efficiently. We also analyze the performance using the proposed algorithm in the implemented IMS environment.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.11
• /
• pp.1506-1512
• /
• 2000

Control of shock may be important in the hydraulic system and necessary to avoid failure and to improve the efficiency of operation. This study addresses the design and use of an orifice to provide the desired control of the hydraulic actuator system. The experimental apparatus is an idealization of an automobile shift system. Control is accomplished by installing three different types of orifices at appropriate locations in the system. Experimental results show that the orifice can be used to obtain the control of shock and control level depends on the orifice size, orifice type, operating pressure and flow rate.

• The Pure and Applied Mathematics
• /
• v.30 no.2
• /
• pp.191-201
• /
• 2023

In this paper the control system described by Urysohn type integral equation is studied. It is assumed that control functions are integrally constrained. The trajectory of the system is defined as multivariable continuous function which satisfies the system's equation everywhere. It is shown that the set of trajectories is Lipschitz continuous with respect to the parameter which characterizes the bound of the control resource. An upper estimation for the diameter of the set of trajectories is obtained. The robustness of the trajectories with respect to the fast consumption of the remaining control resource is discussed. It is proved that every trajectory can be approximated by the trajectory obtained by full consumption of the control resource.

• Journal of Preventive Medicine and Public Health
• /
• v.20 no.2 s.22
• /
• pp.236-246
• /
• 1987

n-Hexane and benzene are organic compounds which have been widely used as industrial solvents. However, they are also increasingly recognized as important pollutants in working environment. The purpose of this study is tp analyze neurotoxicity of benzene and n-hexane. In this study, tibial nerve of Sprague-Dawley rats were observed after exposing them to two different concentrations of these compounds (6000 ppm of n-hexane and 2000 ppm of benzene) which were known to be the levels to cause subacute toxicity for the three different periods; two weeks, four weeks, and six weeks. The following results were obtained from the analysis of variance, Duncan's multiple comparison test, and regression analysis: 1) Myelin sheath thickness of nerve fiber for two n-hexane exposed groups (four weeks and six weeks) were both reduced compared with the control group and the benzene exposed group. 2) There were positive relationships between nerve fiber diameter and myelin sheath thickness for both exposed and control groups. 3) There was no significant difference in myelin sheath thickness from equal diameter nerve fibers between benzene exposed group and control group, but the greater number of thin myelin sheath were observed for n-hexane exposed group compared with control group. Thus, it is concluded that n-hexane tends to reduce the rate of growth of nerve fiber more than the benzene and control group. While these results shed light on understanding the effects of benzene and n-hexane, the duration of exposure was not long enough to apply these results to real working environments. In addition, to further understand the mechanims of nerve degeneration caused by organic solvents, both epidemiological and biochemical studies should accompanied by this kind of study.

• Journal of Powder Materials
• /
• v.22 no.4
• /
• pp.240-246
• /
• 2015

Anodic aluminum oxide (AAO) has been widely used for the development and fabrication of nano-powder with various morphologies such as particle, wire, rod, and tube. So far, many researchers have reported about shape control and fabrication of AAO films. However, they have reported on the shape control with different diameter and length of anodic aluminum oxide mainly. We present a combined mild-hard (or hard-mild) anodization to prepare shape-controlled AAO films. Two main parameters which are combination mild-hard (or hard-mild) anodization and run-time of voltage control are applied in this work. The voltages of mild and hard anodization are respectively 40 and 80 V. Anodization was conducted on the aluminum sheet in 0.3 mole oxalic acid at $4^{\circ}C$. AAO films with morphologies of varying interpore distance, branch-shaped pore, diameter-modulated pore and long funnel-shaped pore were fabricated. Those shapes will be able to apply to fabricate novel nano-materials with potential application which is especially a support to prevent volume expansion of inserted active materials, such as metal silicon or tin powder, in lithium ion battery. The silicon powder electrode using an AAO as a support shows outstanding cycle performance as 1003 mAh/g up to 200 cycles.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.4
• /
• pp.284-291
• /
• 2015

This study was performed to investigate the effects of enhanced light transmission on plant growth, photosynthetic ability, and disease tolerance to leaf blight, anthracnose in ginseng (Panax ginseng C. A. Meyer, Araliacease family) during the early growth stage (April to June). The photosynthetic ratio, stomatal conductance, and stem diameter of plants grown under a shade net with 15% light transmission rate showed an increasing trend compared to the control plants (5% light transmission rate) although the growth of the aerial parts were not influenced significantly. Plant height, stem length, and leaf length of treated plants were not significantly different from those of the control plants. Root parameters, such as root length, diameter, and weight of treated plants increased significantly compared to the control. Yield performance ($187.4kg{\cdot}10a^{-1}$) of treated plants was 55.5% higher than that of the control ($150.4kg{\cdot}10a^{-1}$). Additionally, disease severity scores of treated plants were lower than those of the control plants, revealing higher survival rates. To retain high yield potential and enhance the level of disease tolerance in ginseng, we suggest the increase of light transmission rate during the early growth stage.

• Computers and Concrete
• /
• v.11 no.2
• /
• pp.105-121
• /
• 2013

This paper investigates the parameters that control the design of Fiber Reinforced Polymer (FRP) reinforced concrete flexural members proportioned following the ACI 440.1R-06. It investigates the critical parameters that control the flexural design, such as the deflection limits, crack limits, flexural capacity, concrete compressive strength, beam span and cross section, and bar diameter, at various Mean-Ambient Temperatures (MAT). The results of this research suggest that the deflection and cracking requirements are the two most controlling limits for FRP reinforced concrete flexural members.

• Journal of Bio-Environment Control
• /
• v.16 no.2
• /
• pp.142-145
• /
• 2007

Growth characteristics according to mixture ratio of used-rockwool in pot nursery, in Pinus densiflora, Torreya nucifera, Quercus acutissina and Fraxinus mandshurica nursery, was investigated. The used-rockwool on mixture ratio between used-rockwool and control (peatmoss: pearlite=1:1, v/v) were 0%, 30%, 50% and 70%. Flesh weight, dry weight and height of tree, in Pinus densiflora nursery, increased much more in 50% and 70% media but trunk diameter of tree had no difference according to mixture ratio. In Torreya nucifera nursery, flesh weight and height of tree in 70% medium and trunk diameter and numbers of shoot of tree in 50% and 70% media increased. Flesh weight, height and trunk diameter of tree, and chlorophyll (SPAD) and photosynthesis rate, in Quercus acutissina nursery, increased much more in 50% and 70% media, but dry weight of tree had only difference between non-mixed and mixed with rockwool. In Fraxinus mandshurica nursery, flesh weight and photosynthesis rate of tree increased much more in 70% medium, height, trunk diameter and total chlorophyll of tree had difference according to non-mixed and mixed with rockwool or had no only difference according to mixture ratio, respectively.

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.3
• /
• pp.355-362
• /
• 1999

Objective: This study was performed to compare the clinical response to controlled ovarian hyperstimulation (COH) of in vitro fertilization and embryo transfer (IVF-ET) according to the size of baseline ovarian cyst. Method: From February 1992 to March 1999, a retrospective analysis was done of 272 cases who underwent COH using mid-luteal phase long protocol of gonadotropin-releasing hormone agonist (GnRH-a) for IVF-ET. These cases were divided into four group; group 1 (n=63) had cysts with mean diameters between 20.0 and 29.0 mm on their baseline ultrasound on cycle day 3, group 2 (n=57, $30.0{\sim}49.0mm$), group 3 (n=68, >50.0 mm) and control group (n=84). Cases were excluded according to the following criteria; pure male factor infertility, the presence of only one ovary, high CA-125 level and previous endometriosis. Results: There were no statistically significant differences between cases with baseline ovarian cyst <50.0 mm in diameter and control group in any of the parameters. However, cases with baseline ovarian cyst>50.0 mm in mean diameter needed more amount of human menopausal gonadotropin (hMG), showed significantly lower estradiol ($E_2$) level, the number of follicle >15.0 mm on the day of human chorionic gonadotropin (hCG) administration, the number of oocytes retrieved, the number of mature oocytes, and pregnancy rate compared with control group. Conclusion: This study suggests that cases with baseline ovarian cyst <50.0 mm in diameter do not adversely impact on IVF-ET outcome. However, cases with baseline ovarian cyst >50.0 mm in diameter had adverse effects on various parameters. Therefore, to improve the outcome of IVF-ET in these cases, ovarian cyst aspiration prior to initiating COH may be required.