• Journal of Broadcast Engineering
• /
• v.14 no.3
• /
• pp.322-331
• /
• 2009

This paper proposes an efficient data representation of stereo images using edge-based mesh optimization. Mash-based two dimensional warping for stereo images mainly depends on the performance of a node selection and a disparity estimation of selected nodes. Therefore, the proposed method first of all constructs the feature map which consists of both strong edges and boundary lines of objects for node selection and then generates a grid-based mesh structure using initial nodes. The displacement of each nodal position is iteratively estimated by minimizing the predicted errors between target image and predicted image after two dimensional warping for local area. Generally, iterative two dimensional warping for optimized nodal position required a high time complexity. To overcome this problem, we assume that input stereo images are only horizontal disparity and that optimal nodal position is located on the edge include object boundary lines. Therefore, proposed iterative warping method performs searching process to find optimal nodal position only on edge lines along the horizontal lines. In the experiments, we compare our proposed method with the other mesh-based methods with respect to the quality by using Peak Signal to Noise Ratio (PSNR) according to the number of nodes. Furthermore, computational complexity for an optimal mesh generation is also estimated. Therefore, we have the results that our proposed method provides an efficient stereo image representation not only fast optimal mesh generation but also decreasing of quality deterioration in spite of a small number of nodes through our experiments.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.1
• /
• pp.13-20
• /
• 1993

Traditional fermented fish products 'Jeodtgal' have been prepared with addition of about $25\%$ salt to prevent spoilage, but domestic seasoned and fermented products have only about $8\%$ salt, so they have been required careful treatment during distribution and could have a different fermentation pattern from traditional 'Jeodtgal' This study was conducted to establish shelf-life of seasoned and fermented squid at different distribution conditions. To establish shelf-life of seasoned and fermented squid stored at $10^{\circ}C,\;20^{\circ}C$ and $30^{\circ}C$, chemical components and sensory evaluation were investigated. Chemical components such as volatile basic nitrogen(VBN), ammonia nitrogen ($NH_3-N$) and total nitrogen(T. N) rapidly increased during storage at $20^{\circ}C$ and $30^{\circ}C$, but pH value and Hunter color value(${\Delta}E$) slowly decreased during storage without respect of storage temperature. Judging from chemical components analysis and senseory evaluation, seasoned and fermented squid could be storage for 3days at $30^{\circ}C$, 7days at $20^{\circ}C$ and 25days at $10^{\circ}C$, respectively. The ratio of quality deterioration per hour were 0.00166 at $10^{\circ}C$, 0.00595 at $20^{\circ}C$ and 0.01385 at $30^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.28-36
• /
• 2018

Islands are supplied with power from diesel generation or from photovoltaic power generation, and problems with offshore environmental impacts (age deterioration, salt pollution), environmental pollution (exhaust gas, noise, dust) and power generation costs (installation, maintenance) have increasingly emerged. In 2016, the cost recovery rate was only 27%, and deficits reached 73% on 65 islands managed by KEPCO. In terms of deficits, the costs incurred in the power generation sector accounted for 91%, with the ratio of fixed costs at about 60%. Analysis suggests that operating costs can be reduced with an optimal power supply system that improves power generation efficiency and makes operating systems more efficient. Therefore, it is possible to simplify fuel transportation and facility maintenance, because one island integrates the power plants of remote islands, and offshore cable is used to supply power to the other islands. From the economic evaluations in this paper, an algorithm deciding offshore cable layout validity for an integrated power supply between adjacent islands is presented. Simulation results based on the proposed algorithm confirmed that an integrated power supply is economical for existing stand-alone operations on islands having diesel generation, low peak power, and near distances.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.5
• /
• pp.598-606
• /
• 2020

Objective : The purpose of this study was to evaluate the impact of time interval between index event and stenting on the periprocedural risk of stenting for symptomatic carotid stenosis and to determine the optimal timing of stenting. Methods : This retrospective study included 491 (322 symptomatic [65.6%] and 169 asymptomatic [34.4%]) patients undergoing carotid stenting. The symptomatic patients were categorized into Day 0-3, 4-7, 8-10, 11-14, 15-21, and >21 groups according to the time interval between index event and stenting. Periprocedural (≤30 days) risk for clinical (any neurological deterioration) and radiological (new infarction on postprocedural diffusion-weighted imaging) events of stenting in each time interval versus asymptomatic stenosis was calculated with logistic regression analysis adjusted for confounders, and provided as odds ratio (OR) and 95% confidence interval (CI). Results : Overall clinical event rate (4.3%) of stenting for symptomatic carotid stenosis was higher than that for asymptomatic stenosis (1.2%; OR, 3.979 [95% CI, 1.093-14.489]; p=0.036). Stenting in Day 0-3 (13.2%; OR, 10.997 [95% CI, 2.333-51.826]; p=0.002) and Day 4-7 (8.3%; OR, 6.775 [95% CI, 1.382-33.227]; p=0.018) was associated with high risk for clinical events. However, the clinical event rates in stenting after 7 days from index event (Day 8-10, 1.8%; Day 11-14, 2.5%; Day 15-21, 0%; Day >21, 2.9%) were not different from that in stenting for asymptomatic stenosis. Overall radiological event rate (55.6%) in symptomatic stenosis was also higher than that in asymptomatic stenosis (35.5%; OR, 2.274 [95% CI, 1.553-3.352]; p<0.001). The high risk for radiological events was maintained in all time intervals (Day 0-3 : 55.3%; OR, 2.224 [95% CI, 1.103-4.627]; p=0.026; Day 4-7 : 58.3%; OR, 2.543 [95% CI, 1.329-4.949]; p=0.005; Day 8-10 : 53.6%; OR, 2.096 [95% CI, 1.138-3.889]; p=0.018; Day 11-14 : 57.5%; OR, 2.458 [95% CI, 1.225-5.021]; p=0.012; Day 15-21 : 55.6%; OR, 2.271 [95% CI, 1.099-4.764]; p=0.028; Day >21 : 54.8%; OR, 2.203 [95% CI, 1.342-3.641]; p=0.002). Conclusion : This study showed that as stenting was delayed, the periprocedural risk for clinical events decreased. The clinical event risk was high only in stenting within 7 days and comparable with that for asymptomatic stenosis in stenting after 7 days from index event, although the radiological event risk was not affected by stenting timing. Therefore, our results suggest that delayed stenting after 7 days from symptom onset is a safe strategy for symptomatic stenosis.

• Journal of Chest Surgery
• /
• v.31 no.12
• /
• pp.1165-1171
• /
• 1998

Background: All currently available mechanical and bioprosthetic valves are associated with various types of deterioration leading to dysfunction and/or valvular complications. Reoperation on prosthetic heart valves is increasingly under consideration for both clinical and prophylactic indications. This review was conducted to determine the factors affecting the risk of reoperation for prosthetic valve replacement. Material and method: From January 1985 to July 1996, 124 patients underwent reoperation on prosthetic heart valves, and 3 patients had a second valve reoperation. The causes of reoperation were prosthetic valve failure(96 cases, 77.4%), prosthetic valve thrombosis(16 cases, 12.9%), prosthetic valve endocarditis(7 cases, 5.6%) and paravalvular leak(5 cases, 4.1%). This article is based on the analysis of the experience with particular emphasis on the preoperative risks affecting the outcome of the reoperation. Result: Overall hospital mortality rate was 8.9%(11/124). Low cardiac output was the most common cause of death(70.6%). Left ventricular systolic dimension(p=0.001), New York Heart Association functional class IV(p=0.003) and serum creatinine level(p=0.007) were the independent risk factors, but age, sex and cardiothoracic ratio did not have any influence on the operative mortality. Follow-up period was ranged from 3 to 141 months (mean, 50.6 months). A late mortality rate was 1.8%. Conclusion: The surgical risk of reoperation on heart valve prostheses in the advanced NYHA class patients is higher, therefore reoperation is recommended before the hemodynamic impairment become severe.

• Food Science and Preservation
• /
• v.13 no.3
• /
• pp.273-278
• /
• 2006

In order to help the preservation of the cherry tomato and unshiu orange, antimicrobial paper incorporating grapefruit seed extract and zeolite was applied to the package. Cherry tomato and unshiu orange were packed in a box (38x25x20 cm) attached with antimicrobial paper and then stored respectively at $5^{\circ}C$. During the storage, weight loss, pH total acidity, soluble solid content microbial load and decay ratio were measured as quality indices. pH increase in cherry tomato was observed until 20 days, and decreased with litle difference between the packaging treatments thereafter pH and total acidity decrease in unshiu orange were shown till 30 days, and abrupt change was revealed by 40 days. This was due to physiological disorders. The microbial loads of total aerobic bacteria, and yeast/mold count were suppressed during storage by the box packaging incorporated with antimicrobial agents, which also contributed to reducing the decayed cherry tomato and unshiu orange. Antimicrobial paper was useful fur the reduction of microbial load in cherry tomato and unshiu orange pear without other quality deterioration.

• Food Science and Preservation
• /
• v.5 no.3
• /
• pp.224-230
• /
• 1998

In order to establish proper storage conditions for ginger, the quality changes of gingers stored at three different temperatures(7$^{\circ}C$, 12$^{\circ}C$ and 20$^{\circ}C$) and three different relative humidities(75%, 85% and 95%RH) were investigated during 150 days of storage. Gingers stored at 7$^{\circ}C$ and 20$^{\circ}C$ showed rapid quality deterioration due to chilling injury and spouting respectively in any range of relative humidity. Ginger stored at 7$^{\circ}C$ was staled to show symptoms of the chilling injury such as moldiness, shrivelling, discoloration etc after 30 days of storage ; then it was deteriorated after 90 days of storage. Ginger stored at 20$^{\circ}C$ was completely lost its storage-life after 30 days of storage because of high sprouting ratio. However ginger stored at 12$^{\circ}C$, 75%RH showed better quality than ones stored at both 7$^{\circ}C$ and 20$^{\circ}C$, but it was not so good as the one at 7$^{\circ}C$, 95%RH. Consequently storage conditions of 12$^{\circ}C$, 95%RH was observed the best effecive condition for keeping rhizomes in good quality from weight loss, spouting, mouldiness and so on.

• Strategy21
• /
• s.43
• /
• pp.5-28
• /
• 2018

The tensions between the U.S and China, which form the two pillars of the G2 era, seem to have persisted even after the Trump administration inaugurated. The strong confrontation between the two in recent foreign security issues may drive to develop an inadvertent military conflict, and it is high likely to occur in the maritime are. The purpose of this study is not only to analyze the balance of modernized naval forces in the PLAN through naval strategy changes and weapons system modernization trend, but also to predict the impact of the geographical proximity difference on the balance of naval forces in the disputed areas. It examined the impact of distance and geography on naval power by assessing the modernization pattern of the PLAN and capabilities in the context of two scenarios at different distances from China by 2020: one centered on Taiwan and the other on the Spratly Islands. The PLAN's strategy had impact on operational concept and forces construction. First, from the viewpoint of operation operational concept, it can be seen that the passive defense is changing into active defense. Second, in terms of power construction, it can threaten the surface and submarines of U.S power from a distance. And they generated follow three features; The ocean is not the focus of Chinese submarines, Horizontal and vertical expansion of Chinese naval vessels, The improvement of the suppression ability as the Chinese naval modernization ratio increases. The strength of the PLAN is dominant over the U.S in terms of reserves, and it can complement the qualitative deterioration by utilizing nearby bases in the vicinity of the mainland, such as the Taiwan Strait. However, due to the shortage of aircraft carriers, there is a possibility that it will take some time to secure the advantage of air and ocean in the amphibious operation. Therefore, as the dispute is prolonged, China may fail to achieve its original goal. In addition, the lack of cutting edge Commanding Ships may bring to weaken the C2 capabilities. At results, it is expected that PLAN will not be able to have a superiority in the short term due to lagging behind U.S advanced technology. Nevertheless, PLAN has strengthened its naval power through modernization sufficiently and it is highly likely to use force. Especially, it is more likely in the region where the naval power operation like the Taiwan Strait is possible with the almost equality to that of the United States. China will continue to use its naval forces to achieve a rapid and decisive victory over U.S in the close area from the land.

• Korean Journal of Food Science and Technology
• /
• v.25 no.1
• /
• pp.63-68
• /
• 1993

Heat penetration characteristics of retort pouched curry were studied to determine optimal sterilization conditions. Heating curve of retort pouched curry showed a simple logarithmic curve. The $f_h$ value (min.) of solid part in retort pouched curry was 1 min. higher than that of liquid part. $f_h$ value (min.) and $j_h$ value (heating lag factor) ranged from 8.3 min. to 12 min. and 1.0 to 1.17 respectively with increasing the ratio of solid to liquid and viscosity. $f_h$ value (min.) and $j_h$ value were significantly increased from 7.4 min. to 12.6 min. and 1.0 to 1.14 respectively with increasing thickness of the pouch from 11 to 15 mm. The low and medium volatile aroma components of retort pouched curry decreased during sterilization, which increased the high volatile aroma components. The retort pouched curry processed at $120^{\circ}C$, for 24 min. with $F_o$, value of $8{\sim}9$ could keep up a desirable quality without any remarkable deterioration.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.5
• /
• pp.525-534
• /
• 2006

Column-to-beam pinned connections can cause local moment to the web of a steel tube due to the distance of eccentricity between the row of bolts and the column flange, which possibility deteriorates the load capacity of column. In this study, a square hollow section tubular used finite element analysis of a square hollow section tubular column was carried out, and the column width and thickness, existence and non-existence of internal reinforcement, and existence and non-existence of compressive force were taken as variables to examine the load capacity deterioration of a square column caused by moment. To guarantee the reliability of the finite element results, some specimens were fabricated and tested. The yield line method was applied to suggest the strength formulas of the square tubular column to the beam pinned connections. Based on the study results, the column strength the moment of the square hollow section tubular column to the beam pined connections improved with the increase in the w to strength limitations, a no-reinforcement type of square hollow section tubular column was proposed, and if the limitation values were not satisfied, the reinforcement of the internal column was made mandatory. Therefore, the horizontal -reinforcement type considered the strength increase, and the fabrication of the square hollow section tubular column was ar column that considered its load capacity with the moment for the no-reinforcement and the horizontal-reinforcement types.