• The KIPS Transactions:PartD
• /
• v.9D no.5
• /
• pp.903-914
• /
• 2002

In this research, the technique and tool for the adaptation of components are suggested. While reusing a component or assembling components, component adaptation should be required since the interfaces of component to be assembled might not be exactly matched. Sometimes, other attributes are needed for new business features or even the same business concept. So, in reusing or assembling a component, component adaptation techniques are essentially required. In this research, we proposed the following Component Adaptation by Binary Component Adaptation Techniques : and Component Adaptation by Adaptation Components. Also, we constructed a component adaptation supporting tool. As the results, we can adapt the existing components without source code and can reuse the existing components when the components do not meet new requirements or can not be directly connected with other components to be integrated.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.1
• /
• pp.37-48
• /
• 2004

Important Java network application services have been rapidly increased along with the growth of the Internet. So, it is desirable for such applications to serve transparently, continuously and safely even if the network is temporally partitioned or certain hosts running those services are crashed down. To satisfy such requirements, many group communication systems have been developed. However, existing Java-based group communication systems do not support both the extended virtual synchrony and various types of message delivery such as FIFO, causal, total and safe delivery service. In this paper, we present the design and implementation of a Java group communication system, named JACE, supporting various types of message delivery between group members and the extended virtual synchrony model. The JACE system consists of a number of protocol modules which can be stacked on top of each other in a variety of ways. In addition, using the JACE system, we have developed an experimental UDDI registry for discovering and publishing information about Web services.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1658_1659
• /
• 2009

PLS(Pohang Light Source) will begin the PLS-II project that has been funded by the KOREA Government in order to further upgrade the PLS which has operated since 1992. The control system of the PLS-II has distributed control architecture, with two layers of hierarchy; operator interface computer (OIC) layer and machine interface computer (MIC) layer. The OIC layer is based on SUN workstation with UNIX. A number of PC-based consoles allow to remotely operating the machine from the control room. PC-based consoles use the Linux or Windows operation system. Similar consoles in the experimental hall are used to control experiments. The MIC layer is directly interfaced to individual machine devices for low-level data acquisition and control. MIC layer is based on VMEbus standard with vxWorks real-time operating system. Executable application software modules are downloaded from host computers at the system start-up time. The MIC's and host computers are linked through Ethernet network. It should enable the use of hardware and software already developed for specific light source requirements. The core of the EPICS (Experimental Physics and Industrial Control System)[1] has been chosen as the basis for the control system software.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.12
• /
• pp.1237-1242
• /
• 2012

No matter how low it might be, noise from home appliances in indoor environment cause displeasure for residents as it is produced nearby. Electronic goods including vacuum cleaner and washing machine generate high frequency noise, which interrupts TV-watching or conversations and cause noises between floors in apartment houses. In particular, refrigerators make constant noise late at night, hampering the study for exams and causing sleeplessness. Korea, despite the government's efforts to promote low-noise goods based on the noise test by corporation, there is a lack of standardization in the test method, test condition and measuring equipments. This is a major reason that lowers the reliability of low-noise products. At present, low-noise home appliances are certified with eco labeling in the nation but, only 7 brands of refrigerators, 4 brands of washing machines and 97 brands of air-conditioners obtained certification as of august, 2011. In addition, none of Kimchi-refrigerator and vacuum cleaner brands were approved as low-noise home appliances. This shows Korea's relatively underdeveloped market for low-noise products, which, in part, is because of the difficulties companies face in being certified with eco labeling as they should satisfy various requirements such as power-saving and eco-friendly design besides low-noise features. As a result, low-noise labeling for home appliances should be established for the revised noise and vibration management law and the study was carried out to establish low-noise labeling system for major noise sources including vacuum cleaner, washing machine, air-conditioner and refrigerator.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.2
• /
• pp.169-180
• /
• 2017

Cyclic loading tests for beam-to-column weak-axis connections were performed to investigate the seismic performance. In this study, the connections were developed to improve the constructability on the basis of investigation for existing small-size steel structures. The primary test parameter is the number of high-tension bolts which are used to connect steel beam and column using exterior and interior flange plates. Test results showed that the number of bolts had a significant effect on the cyclic behavior of beam-column weak-axis connections. From the analysis of test results, it is concluded that more than four bolts in the connections can satisfy the requirements of semi-rigid connection presented in current design codes. All of specimens showed the bearing failure around bolt holes and fracture at the beam flange. However, when the web height and the flange width is relatively small, the number of the bolts used in the connections might be limited. Thus, the additional research in this area is needed.

• Information Systems Review
• /
• v.10 no.2
• /
• pp.309-327
• /
• 2008

This research is a byproduct of a project initiated by a major airport in Korea. The airport aimed to enhance airside safety and weighed a few IT options that may strengthen its current safety practices. In order to satisfy requirements unique to the airport and to inherit existing legacy systems, a PCS-based mobile database system was proposed. We first discuss technical aspects of the system as well as design issues in mobile systems before we compare two specific alternatives for transactional service handoff. A simulation study comparing two types of coordination follows before we present a scheme that manages transaction processing and locating service in mobile environments. Finally, we discuss the limitations of the scheme from the perspectives of the airport in question along with other research issues.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.3
• /
• pp.127-136
• /
• 2014

As a new management paradigm, co-creation for creating new value through collaboration with stakeholders, including customers, distributers, suppliers, and partner organizations has been issued in the private and public organizations. To collectively create new value, effective communication tools among the interest groups should be provided. In fact, most of organizations have utilized information technology such as home pages and SNS for distributing information and respecting customer opinions. However, they are seriously experiencing in difficulty of systematic management and overlapped investment on information technology for co-creation. Thus, this study proposes the conceptual model for co-creation platform through case studies and it is verified by scenario analysis and experts. The study contributes to accumulate knowledge in the area of co-creation platform. It also defines the requirements and the functions for the design of co-creation platform for practitioners.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.8
• /
• pp.91-98
• /
• 2003

In the structural analysis of a launch vehicle, the construction of loading functions and the determination of responses to them are very important. Among many kinds of loads, acoustic load generated by exhaust is a random load that can be described in a statistical manner. In this study, loading functions corresponding to the acoustic loads are constructed and applied to the structural analysis of launch vehicle. Acoustic loading functions are constructed using source allocation method. Structural analyses are carried out by using finite element modelling and frequency response function of finite element model. The stresses resulting from acoustic loads and acceleration power spectral density functions at interfaces of each section are calculated. These analyses are essential for the development of environmental test specifications and associated dynamic design requirements which are necessary to ensure overall vehicle reliability.

• Design & Manufacturing
• /
• v.11 no.1
• /
• pp.45-49
• /
• 2017

Currently, a lot of efforts to make increases the manufacturing efficiency have tried and there is growing the interest to implementing the machining operation through CAM automation and optimization. This kind of movement has shown gradually in 5X milling as well as 3X milling task. By the way, in case of 5X milling, it is difficult to hire the CAM experts who is an experience for 5X machining and also it has too big trouble to use them due to high cost. For this reason, you can see the manufacturer who is concern the CAM S/W to provide the NC automation program that beginners can generate easily the 5X milling in short term and the existing 5X milling process can be improved. These requirements need to make a NC automation process including the practical machining strategies same as the generation by NC expert. In order to support this, it is necessary to directly apply the 3D machining part based on NC template which includes the machining procedures, standard cutter library, auto machine area selection, analyze tool for part shape, machining condition setting considering the material stiffness to be provided by CimatronE and it should be created the 5axis machining data by a minimized operation. With user-friendly, CimatronE's NC machining automation tools improve the 5-axis machining process and speed up the process, maximizing work efficiency and improving product productivity compared to existing machining tasks.

• Journal of Engineering Education Research
• /
• v.9 no.2
• /
• pp.52-70
• /
• 2006

Systems Engineering(SE), as a special discipline evolved from multidisciplinary and interdisciplinary design knowledges and practical lessons learned from development practices, is required to develop today's ever-growing large complex systems. As computer speed and analytic sophistication accelerate their applications, modern society's needs have become increasingly varied and complex. Rapid advances in Systems Engineering and its education programs among the developed countries demonstrate their needs as an alternative to what is lacking from traditional disciplinary engineering to meet new challenges of our changing social environments. Systems Engineering is an interdisciplinary approach that includes both management and technical processes. Its processes, methods, and tools are used to evolve, define, and verify an integrated, life-cycle balanced set of system solution that satisfy customer needs and requirements. The process methodology offers a top-down comprehensive, iterative and recursive problem solving process which includes the stating the problems, investigating the alternatives, architecting and modeling the system, integrating and operating the system, assessing and re-evaluating the system performances. The purpose of this paper is to research the cases of SE educational programs for both domestic and other developed countries and to propose recommendations for the domestic SE educational programs in the future.