• Journal of the Korean Society of Costume
• /
• v.67 no.3
• /
• pp.31-46
• /
• 2017

The purpose of this study is to analyse the occurrence and evolution of Mao suit which is important position in the modern costume history of China and to provide a source of design inspiration to contemporary fashion designers. In the research method, literature review and case studies was conducted in parallel. For the literature review, changes of Mao suit in each age were reviewed with reference to the related documents, Chinese costume and cultural history, prior research papers and internet resources. The case analysis was qualitatively done focusing on the silhouette, color and detail of clothes in fashion collections. The scope of the study was from 1912 to 2000. The case analysis of the Mao suit applied to the contemporary fashion was made on the applications centered around 'London Collection', 'New York Collection', 'Paris Collection', 'Milan Collection' and 'Chinese Fashion Week' from 2008 to 2015. The results found that Mao suit changed into many different forms after Sun Wen designed it for the first time in 1912. This study classified it into Phase 1(1912~1927), Phase 2(1928~1965), Phase 3(1966~1977), and Phase 4(1978~2000) with historical and political issues and conformational changes in Mao suit. The frequency analysis of the cases of the fashion collections using Mao suit from 2008 to 2015 showed an increased application of Mao suit to the western collection in New York, Paris and London in 2008 due to the impact of Beijing Olympics. However, from 2009 onwards, the frequency of the utilization of Mao suit was higher in the Chinese Fashion Week and the New York Collection. This cause is explained by the fact that the designers who inspired from Mao suit in the New York Collection are American Chinese.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.98-103
• /
• 2018

The CNTFET, which is widely recognized as a next-generation semiconductor, has a structure that can improve performance by positioning CNTs between the source and drain of a conventional MOSFET. However, positioning CNTs increases the complexity of a CNTFET's structure, and the process variation changes the complex structure into various shapes; so, when CNTFET device performance is analyzed, it requires more computation than that of a conventional MOSFET. These problems greatly increase the simulation time necessary for the analysis, and sometimes that analysis cannot be performed using an existing tool; they are therefore important obstacles to designing a circuit using a CNTFET. In this study, we will show that the existing Linear Programming methodology can be utilized to solve the long simulation time problem and discuss the effect of the suggested method in detail. Simulation results show that the Linear Programming method can reduce the number of simulation about 2.5 times when the maximum number of CNT is changed from 6 to 12.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.109-115
• /
• 2014

This paper suggest meteorological satellite processing software's structure that reduces time and efforts of modification/upgrade. This structure's key feature is "algorithm component" that works within framework and eventually to a complete Meteorological satellite processing system. Most of existing Meteorological satellite system is designed around specific function and data sets which limits range of modification and upgrade. In addition, re-use of current algorithms become difficult although re-use of similar algorithm is the case in many occasions. This inefficiency can be resolved by designing a new framework as a result of detail analysis of collected requirements. A new framework and system architecture has been designed. In addition, operational flow of Satellite image processing framework has been described.

• Earthquakes and Structures
• /
• v.10 no.2
• /
• pp.367-388
• /
• 2016

Eccentrically braced frames (EBFs) represent an attractive lateral load resisting steel system to be used in areas of high seismicity. In order to assess the likely damage for a given intensity of ground shaking, fragility functions can be used to identify the probability of exceeding a certain damage limit-state, given a certain response of a structure. This paper focuses on developing a set of fragility functions for EBF structures, considering that damage can be directly linked to the interstorey drift demand at each storey. This is done by performing a Monte Carlo Simulation of an analytical expression for the drift capacity of an EBF, where each term of the expression relies on either experimental testing results or mechanics-based reasoning. The analysis provides a set of fragility functions that can be used for three damage limit-states: concrete slab repair, damage requiring heat straightening of the link and damage requiring link replacement. Depending on the level of detail known about the EBF structure, in terms of its link section size, link length and storey number within a structure, the resulting fragility function can be refined and its associated dispersion reduced. This is done by using an analytical expression to estimate the median value of interstorey drift, which can be used in conjunction with an informed assumption of dispersion, or alternatively by using a MATLAB based tool that calculates the median and dispersion for each damage limit-state for a given set of user specified inputs about the EBF. However, a set of general fragility functions is also provided to enable quick assessment of the seismic performance of EBF structures at a regional scale.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.8
• /
• pp.1051-1060
• /
• 2003

The heat and mass transfer on two kinds of tube surfaces (bare stainless steel tube and Teflon coated tube) in steam-air mixture flow are experimentally studied to obtain design data for the heat exchanger of the latent heat recovery from flue gas. In the test section, 3-tubes are horizontally installed, and steam-air mixture is vertically flowed from the top to the bottom. The pitch between tubes is 67mm, the out-diameter of tube is 25.4mm, and the thickness is 1.2mm ; blockage factor (cross sectional tube area over the cross sectional area of the test section) is about 0.38. All of sensors and measurement systems (RTD, pressure sensor, flow-meter, relative humidity sensor, etc.) are calibrated with certificated standard sensors and the uncertainty for the heat transfer measurement is surveyed to have the uncertainty within 7%. As experimental results, overall heat transfer coefficient of the Teflon (FEP) coated tube is degraded about 20% compared to bare stainless tube. The degradation of overall heat transfer coefficient of Teflon coated tube comes from the additional heat transfer resistance due to Teflon coating. Its magnitude of heat transfer resistance is comparable to the in-tube heat transfer resistance. Nusselt and Sherwood numbers on Teflon (FEP) coated surface and bare stainless steel surface are discussed in detail with the contact angles of the condensate.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.2
• /
• pp.1-7
• /
• 2001

To protect combustion chamber from high temperature combustion gas, regenerative cooling is used for most liquid rocket engine. Although regenerative cooling is the most effective way to protect the chamber from high heat flux, realization of this system requires detail analysis, manufacturing technique and high cost. To demonstrate the possibility of applying regenerative cooling to a real rocket engine, the hot fire test has been carried out for the sub-scale liquid rocket with the water cooling system. The main purpose of the test is to identify the problem area of design, safety and cost effective manufacturing technique. The coolant passage was 3 mm in width and wall thickness was 1 mm with stainless steel. Maximum combustion time and pressure were 60 seconds and 400 psi, respectively. The flow rate of coolant was reduced gradually from 2 kg/s to 0.12 kg/s throughout firing test, combustion chamber was visually examined and no dwfect was observed.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.313-318
• /
• 2007

Interior permanent magnet synchronous motor(IPMSM) has become a popular choice in electric vehicle applications, due to their excellent power to weight ratio. This paper proposes maximum torque control of IPMSM drive using adaptive fuzzy neural network controller and artificial neural network(ANN). This control method is applicable over the entire speed range which considered the limits of the inverter's current and voltage rated value. For each control mode, a condition that determines the optimal d-axis current $i_d$ for maximum torque operation is derived. This paper considers the design and implementation of novel technique of high performance speed control for IPMSM using Adaptive-FNN controller and ANN controller. The hybrid combination of neural network and fuzzy control will produce a powerful representation flexibility and numerical processing capability. Also, this paper reposes speed control of IPMSM using Adaptive-FNN and estimation of speed using ANN controller. The back propagation neural network technique is used to provide a real time adaptive estimation of the motor speed. The proposed control algorithm is a lied to IPMSM drive system controlled Adaptive-FNN and ANN controller, the operating characteristics controlled by maximum torque control are examined in detail. Also, this paper proposes the analysis results to verify the effectiveness of the Adaptive-FNN and ANN controller.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.710-717
• /
• 2009

The researchers and planners are using patent/paper map system to analyze the research trend, but we can't use the existing analysis system because of the specialty of korean traditional medicine. Thus we deduced the analysis models from preceding research and system and designed 14 analysis models which are composed of basic, detail and complex models. We verified the analysis models using papers which has 'meridian' keyword among 16,000 papers stored in OASIS. From the analysis result, we know that the meridian study has just entered in the maturity and is closely related with other parts of korean traditional medicine as physiology etc. And we verified the proposed analysis model from the comparison with the analysis models of preceding systems. The analysis model will be used for the development of Korean traditional medicine paper map analysis service scenario and system.

• Science of Emotion and Sensibility
• /
• v.11 no.2
• /
• pp.215-226
• /
• 2008

The previous research suggested a self-report questionnaire-type scale to measure a user's emotions naturally expressed while using a product. Using the scale, this research measured their emotions expressed while users use cellular phones naturally for a certain time without setting tasks. The results suggest that the cellular phone of high usability lead to higher 'Satisfaction in Usability' and lower 'Uncomfortableness' than the cellular phone with usability flaws. On the other hand the cellular phone with usability flaws lead to higher 'Uncomfortableness' and lower 'Satisfaction in Usability' but higher in other representative emotions such as 'Aesthetics', 'Novelty', 'Pleasure', and 'Excellence' than the other cellular phone. It can be insufficient to define the correlation between the product usability and the user's emotions based on the results of this research: however, the correlation between these two factors will be discovered in more detail by analyzing the changes of the user's emotions according to the length of time of using cellular phone.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.9 s.100
• /
• pp.872-882
• /
• 2005

In this paper, we examined the operating principle of a passive tag antenna for RFID system in UHF band. Based on the study, we proposed a novel RFID tag antenna which adopts the inductively coupled feeding structure to match antenna impedance to a capacitively loaded commercial tag chip. The proposed tag antenna consists of microstrip lines on a thin PET substrate for low-cost fabrication. The detail structure of the tag antenna were optimized using a full electromagnetic wave simulator of IE3D in conjunction with a Pareto genetic algorithm and the size of the tag antenna can be reduced up to kr=0.27($2 cm^2$). We built some sample antennas and measured the antenna characteristics such as a return loss, an efficiency, and radiation patterns. The readable range of the tag antenna with a commercial RFID system showed about 1 to 3 m.