• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.2
• /
• pp.115-124
• /
• 2009

Cryogenic cutting technology is one of the most suitable technologies for dismantling nuclear facilities due to the fact that a secondary waste is not generated during the cutting process. In this paper, the feasibility of cryogenic cutting technology was investigated by using a computer simulation. In the computer simulation, a hybrid method combined with the SPH (smoothed particle hydrodynamics) method and the FE (finite element) method was used. And also, a penetration depth equation, for the design of the cryogenic cutting system, was used and the design variables and operation conditions to cut a 10 mm thickness for steel were determined. Finally, the main components of the cryogenic cutting system were manufactures on the basis of the obtained design variables and operation conditions.

• Advances in nano research
• /
• v.12 no.5
• /
• pp.515-527
• /
• 2022

The application of fibers in concrete obviously enhances the properties of concrete, also the application of natural fibers in concrete is raising due to the availability, low cost and environmentally friendly. Besides, predicting the mechanical properties of concrete in general and shear strength in particular is highly significant in concrete mixture with fiber nanocomposite reinforced concrete (FRC) in construction projects. Despite numerous studies in shear strength, determining this strength still needs more investigations. In this research, Adaptive Neuro-Fuzzy Inference System (ANFIS) have been employed to determine the strength of reinforced concrete with fiber. 180 empirical data were gathered from reliable literature to develop the methods. Models were developed, validated and their statistical results were compared through the root mean squared error (RMSE), determination coefficient (R²), mean absolute error (MAE) and Pearson correlation coefficient (r). Comparing the RMSE of PSO (0.8859) and ANFIS (0.6047) have emphasized the significant role of structural parameters on the shear strength of concrete, also effective depth, web width, and a clear depth rate are essential parameters in modeling the shear capacity of FRC. Considering the accuracy of our models in determining the shear strength of FRC, the outcomes have shown that the R² values of PSO (0.7487) was better than ANFIS (2.4048). Thus, in this research, PSO has demonstrated better performance than ANFIS in predicting the shear strength of FRC in case of accuracy and the least error ratio. Thus, PSO could be applied as a proper tool to maximum accuracy predict the shear strength of FRC.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.3
• /
• pp.221-231
• /
• 1997

This paper presents an analysis of a hybrid direct-sequence/slow frequency hopped code division multiple access(DS/SFH-CDMA) system employing noncoherent M-ary frequency shift keying(MFSK) modulation in a multiple m-distribution fading environment. Multipath interfer- ence(MPI) and multiuser interference(MUI) is taken into accout and the spectral efficiency is calculated for uncoded as well as simple channel coding systems. The predetection multipath CCI canceller in conjunction with convolution coding is employed for improving the bit error rate(BER) performance. The BER of noncoherent hybrid system is obtained using a Gaussian interference approximation. From the results, we know that the error performance more deteriorates as the depth of fading becomes deeper. The DS part of the modulation combats the multipath interference, whereas the FH part is a predetection against large multiuser interference. It is shown that, for the con- sidered types of a channel coding, the use of a predetection coding is still essential for obtained a satisfactory bit error performance. The results show that the capacity of the DS/SFG-CDMA MFSK communication system increases in proportion to the length of PN code sequence in the presence of AWGN and MUI. In m-distribution fading environment the capacity increases in proportion to the fading index. The capacity is increased and error performance is improved when the CCI Canceller and Convolution code technique are adopted, respectively. From the results, it is known that the error performance of $4\times10^{-2}$ by adopting Canceller technique. Also convolutional coding technique is the improvement of error performance attains about $10^{-5}$ in code rate 1/2.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.321-338
• /
• 1996

The purpose of this study was to evaluate the effect of moistening and air-drying of acid conditioned dentin and enamel on the marginal microleakage. In this study, Class V cavity were prepared on both buccal and lingual surface of sixty extracted human premolars with cementum margin. These specimens were randomly devided into three groups and three dentin adhesives(Scotchbond Multi-Purpose, All bond 2, Prisma Universal Bond 3) were applied to each group. The specimens in each group were subdevided into four groups (Wet/primed, Dry/primed, Wet/not primed, Dry/not primed) and the etched dentin and enamel surface were treated these four surface treatments prior to the placement of a bonding agent or adhesive. Wet/primed group was simply blot-dried with a damp facial tissue before primer placement ; Dry/primed group was air dried for 30 seconds before the placement of a primer ; Wet/not primed group and Dry/not primed group were not primed after blot dried and air dried for 30 seconds each group. The bonding agent and composite resin were applied for each group. All specimens were exposed to 500 cycle of thermal stress. Specimens were placed in a silver nitrate solution and then sectioned buccolingually through the center of the restoration. The dye penetrations of the specimens were observed with a stereo microscope. The statistical test were applied to the results using a one way analysis variance (ANOVA) and Duncan's multiple range test. The aspects of silver ion penetration into the resin/dentin interface were examined under scanning electron microscopy. The results were as follows. 1. In all groups, the enamel margin showed significantly lower leakage value than the cementum margin (p<0.05). 2. Regardless of various surface treatment and dentin adhesives, there was no significant difference at the enamel margins (p>0.05). 3. At the dentin margins, the leakage values of Dry/not primed group showed significantly higher than that of the other groups (p<0.05). The leakage values of Wet/primed group showed significantly lower than that of the other groups, but, there was no significant difference between Wet group and Dry group. 4. There was no significantly difference between the dentin adhesives regarding the surface treatments in all groups(p>0.05). 5. On the backscatterd scanning electron microscopy observation, the penetration of the silver ion occured at the bonding resin/dentin interface. In the Wet/primed group, resindentin hybrid zone and resin penetration into the dentin was observed. The resin tags were compactively formed to a thickness of $3\sim4{\mu}m$ at the upper part of dentinal tubules. In the Dry/primed group, the thickness of the hybrid zone and the diameter, depth of the resin tags diminished. In the Non-primed groups, the hybrid zone was not identified and few resin tag was observed. There was the gap formation in the resin/dentin interface.

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.631-637
• /
• 2006

In this study, fundamental properties such as fresh and hardened performance of concrete mix(specification : 25-24-18) added fluorine-silicate hybrid based crack reducing agent(FS) were measured. Addition of FS ranged from 0.5% to 2.0% at intervals 0.5% based on cement weight. Adequate dosage(0.5%) of FS derived from basic properties measurements applied and compared resistance for shrinkage crack. The permeability of concrete in the absence(24-S-0.0) and presence(24-S-0.5) of evaluated at a mock-up sized concrete. Concrete added FS improved resistance for shrinkage crack and consequently crack number, length and area decreased to $50{\sim}74.4%$ compared non-added. As well, by the addition of FS, the resistance for permeability and penetration depth to concrete surface region increased 67% and 40%, respectively. Therefore it was confirmed that shrinkage crack resistance and permeability of concrete could be improved by the addition of FS.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.4
• /
• pp.265-282
• /
• 2008

Based on the site characterization works in a low and intermediate level waste(LILW) repository site, the numerical simulations for groundwater flow were carried out in order to understand the groundwater flow system of repository site. To accomplish the groundwater flow modeling in the repository site, the discrete fracture network(DFN) model was constructed using the characteristics of fracture zones and background fractures. At result, the total 10 different hydraulic conductivity(K) fields were obtained from DFN model stochastically and K distributions of constructed mesh were inputted into the 10 cases of groundwater flow simulations in FEFLOW. From the total 10 numerical simulation results, the simulated groundwater levels were strongly governed by topography and the groundwater fluxes were governed by locally existed high permeable fracture zones in repository depth. Especially, the groundwater table was predicted to have several tens meters below the groundwater table compared with the undisturbed condition around disposal silo after construction of underground facilities. After closure of disposal facilities, the groundwater level would be almost recovered within 1 year and have a tendency to keep a steady state of groundwater level in 2 year.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.2
• /
• pp.159-166
• /
• 2011

This experiment was carried out to investigate the effect of application of swine slurry (SS) and slurry composting-biofilteration liquid fertilizer (SCB) on productivity of sorghum${\times}$sorghum hybrid (SSH) and soil environment in reclaimed land of Sukmoon in Korea. Dry matter (DM) yields of SSH in the treatments of SS and chemical fertilizer (CF) were higher than those of in SCB treatment in reclaimed land, but DM yields in SS and CF did not show a significant difference as compared to SCB. Nutritive values of SSH were not different among CF, SS and SCB. In soil samples collected at the end of the experiment, the concentration of organic matter was significantly increased by SS and SCB as compare to that at the beginning of the experiment (P<0.05), whereas the concentration of total nitrogen was not affected by SS and SCB. To investigate the moisture content of soil, the soils were collected from three layers; surface (0~5 cm), intermediate (10~15 cm), and deep (20~25 cm) layer. The moisture contents of soils increased according to the soil depth and the soil moisture was immediately affected by the amount of rainfall. Therefore, we suggest that the cultivation of SSH using SS in reclaimed land is possible and that additional nitrogen fertilizer was surely applied in case of application of SCB to cultivate SSH.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.3
• /
• pp.151-158
• /
• 2003

This study was carried out to determine the effect of pig slurry applications on the forage yield of Sorghum${\times}$Sudangrass hybrid and leaching of $NO_3$-N in volcanic ash soil in Jeju. It was arranged as a randomized block design with seven treatments: chemical fertilizer ($N-P_2$$O_{5}$ $-K_2$O=200-l50-150kg/ha), pig slurry 200kg N/ha, pig slurry 300kg N/ha, pig slurry 400kg N/ha, pig slurry 100kg N/ha+chemical fertilizer 100kg N/ha, pig slurry 150kg N/ha+chemical fertilizer 100kg N/ha, pig slurry 200kg N/ha+chemical fertilizer 100kg N/ha. The mean dry matter yield of Sorghum${\times}$Sudan grass hybrid per ha for 4 years(1998 to 2001) was higher(p<0.05) in pig slurry 300kg N/ha(l7,279kg) and pig slurry 400kg N/ha(17,817kg) treatments than those of other treatments. The $NO_3$-N concentrations of leaching water at soil depth 30cm in all treatments were excess the standard of WHO with level of $10.0mg/\ell$ on 20 days of the seeding, but this $NO_3$-N concentrations found to be below $5.0mg/\ell$ on August.

• Korean Journal of Ichthyology
• /
• v.33 no.3
• /
• pp.157-166
• /
• 2021

Three specimens, presumed to be natural hybrids between Rhodeus notatus and R. ocellatus, were collected from Onyangcheon Stream area, Jwabu-dong, Asan-si, Chungcheongnamdo, the Republic of Korea, and morphological and phylogenetic analyses were performed to clearly identify their parent species. The body color of the three natural hybrids was light greenish-brown on dorsal side, and the size of red area on the upper front of the dorsal fin and the outer margin of the anal fin generally showed intermediate characters between the parent species, R. notatus and R. ocellatus. Among the measurement and meristic characters, the ratio of prepectoral length and preanal length in the standard length, and the ratio of snout length, interorbital width, length of caudal peduncle and depth of caudal peduncle in the head length, and the number of longitudinal row scales were analyzed as the unique characters of natural hybrids. In the rag1 gene of nuclear DNA, the three natural hybrids were analyzed to be reflected all the single nucleotide polymorphism sites between R. notatus and R. ocellatus, and in the phylogenetic tree using the cytb gene of mitochondrial DNA, they formed the same genetic clade as R. notatus. Therefore, three specimens, presumed to be natural hybrids analyzed in this study were identified as interspecific hybrids between female R. notatus and male R. ocellatus.

• 한국연소학회:학술대회논문집
• /
• 2006.10a
• /
• pp.235-241
• /
• 2006

Catalytic combustion is one of the suitable methods for micro power source due to high energy density and no flame quenching. Catalyst loading in the micro structured combustion chamber is one of the most important issues in the development of micro catalytic combustors. In this research, to coat catalyst on the chamber wall, two methods were investigated. First, $Al_2O_3$ was selected as a support of Pt and $Pt/Al_2O_3$ was synthesized through the alumina sol-gel procedure. To improve the coating thickness and adhesion between catalyst and substrate, heat resistant and water solvable organic-inorganic hybrid binder was used. Porous silicon was also investigated as a catalyst support for platinum. Through the parametric studies of current density and etching time, fabrication process of $1{\sim}2{\mu}m$ of diameter and about $25{\mu}m$ depth pores was confirmed. Coated substrates were test in the micro channel combustor which was fabricated by the wet etching and machining of SUS 304. Using $Pt/Al_2O_3$ coated substrate and Pt coated porous silicon substrate, conversion rate of fuel was over 95% for $H_2$/Air premixed gas.