References
-
C. Dunsky and M. Hashish, "Feasibility Study of Machining with High-Pressure Liquefied
$CO_2$ Jets," Manufacturing Science and Engineering, 68(1), pp. 453-460 (1994). - H. Liu and T. Butler, "A Vanishing Abrasive Cryogenic Jet for Airframe Depainting," Proceedings of the 14th International Conference on Jetting Technology, pp. 519-533 (1998).
- M. Hashish, "Cutting with High-Pressure Ammonia Jets for Demilitarization of Chemical Weapons," J. of Pressure Vessel Technology, 124, pp. 487-492 (2002). https://doi.org/10.1115/1.1400755
- C. Dunsky and M. Hashish, "Observations on Cutting with Abrasive-Cryogenic Jets," Proc. 13th Int. Water Jet Cutting Technology Conference, BHR Group, Sardinia, Italy, pp. 679-690 (1996).
- G. Cooper, "Cryogenic Drilling: a New Method for Accessing and Sampling Unconsolidated Soils," Geodrilling International, 5(6), pp. 12-16 (1994).
- Y. Shane, H. Qu, and A. Lee, "Economical Cryogenic Milling for Environmental Safe Manufacturing," Society of Manufacturing Engineers, Atlanta, Georgia, pp. 177-1-177-5 (1998).
- S. Paul and A. Chattopadhyay, "Effects of Cryogenic Cooling by Liquid Nitrogen Jet on Forces, Temperature and Surface Residual Stress in Grinding Steels," Cryogenics, 35, pp. 515-523 (1995). https://doi.org/10.1016/0011-2275(95)98219-Q
- M. Hashish and P. Miles, "Fine Powder Fabrication using High-Pressure Waterjets and Cryogenic Jets," 9th American Waterjet Conference, pp. 291-302(1997).
- T. Mabrouki, K. Raissi and A. Cornier, "Numerical Simulation and Experimental Study of the Interaction between a Pure High-Velocity Waterjet and Targets: Contribution to Investigate the Decoating Process," Wear, 239, pp. 260-273 (2000). https://doi.org/10.1016/S0043-1648(00)00333-1
- G. Chahine, K. Kalumuck, "The Influence of Structural Deformation on Waterjet Impact Loading," J. Fluid Structure, 12, pp. 103-121 (1998). https://doi.org/10.1006/jfls.1997.0127
- M. Junkar, B. Jureisevic, M. Fajdiga, et al. "Finite Element Analysis of Single-Particle Impact in Abrasive Water Jet Machining," Int. J. Impact Engineering, 32, pp. 1095-1112 (2006). https://doi.org/10.1016/j.ijimpeng.2004.09.006
- S. Kunaporn, M. Ranulu, M. Jenkins and M. Hashish, "Residual Stress Induced by Waterjet Peening : A Finite Element Analysis", J. of Pressure Vessel Technology, 126, pp. 333-340 (2004). https://doi.org/10.1115/1.1767175
- K.C. Kwon, "Structural Safety Analysis of Openable Working Table in ACP Hot Cell for Spent Fuel Treatment", J. of Korean Radioactive Waste Society, 4(1), pp. 17-24 (2006).
- K.C. Kwon, "A Finite Element Modeling for the Puncture Drop Test of a Cask with the Failure of Impact Limiter", J. of Korean Radioactive Waste Society, 7(1), pp. 9-16 (2009).
- L.B. Lucy, 1977, "A Numerical Approach to the Testing of the Fission Hypothesis," The Astronomical Journal, 82(12), 1013-1024 (1977). https://doi.org/10.1086/112164
- R. Gingold and J. Monaghan, "Smoothed Particle Hydrodynamics: Theory and Application to Non-Spherical Stars," Astronomical Society Monthly Notices, 181, pp. 375-389 (1977).
- G. Johnson, R. Stryk and S. Bsissel, "SPH for High Velocity Impact Computations," Comput. Methods Appl. Mech. Eng., 139, pp. 347-373 (1996). https://doi.org/10.1016/S0045-7825(96)01089-4
- T. Belytschko, Y. Krongauz, D. Organ, et al, "Meshless methods: an Overview and Recent Development," Comp. Methods Appl. Mech. Eng., 139, pp. 1-47 (1996). https://doi.org/10.1016/S0045-7825(96)90021-3
- M. Hashish, "A Model for Abrasive-Waterjet(AWJ) Machining," J. of Engineering Materials and Technology, 111, pp. 154-162 (1989) https://doi.org/10.1115/1.3226448
- J. Zeng and T.J. Kim "Development of an Abrasive Waterjet Kerf Cutting Model for Brittle Materials," Fluid Mechanics and Its Applications, 13, pp. 483-493 (1992).
- A. Momber, "A Generalized Abrasive Water Jet Cutting Model," 8th American Water Jet Conference, pp. 359-376 (1995).
- J. Wang, "Predictive Depth of Jet Penetration Models for Abrasive Waterjet Cutting of Alumina Ceramics," Int. J. of Mechanical Science, 49, pp. 306-316 (2007). https://doi.org/10.1016/j.ijmecsci.2006.09.005