• Journal of the Korean Vacuum Society
• /
• v.16 no.5
• /
• pp.359-365
• /
• 2007

In this paper we present a bottom-gate type of zinc oxide (ZnO) and Gallium (Ga) doped zinc oxide (GZO) based thin film transistors (TFTs) through applying a radio frequency (RF) magnetron sputtering method at room temperature. The gate leakage current can be reduced up to several ph by applying $SiO_2$ thermally grown instead of using new gate oxide materials. The root mean square (RMS) values of the ZnO and GZO film surface were measured as 1.07 nm and 1.65 nm, respectively. Also, the transmittances of the ZnO and GZO film were more than 80% and 75%, respectively, and they were changed as their film thickness. The ZnO and GZO film had a wurtzite structure that was arranged well as a (002) orientation. The ZnO TFT had a threshold voltage of 2.5 V, a field effect mobility of $0.027\;cm^2/(V{\cdot}s)$, a on/off ratio of $10^4$, a gate voltage swing of 17 V/decade and it operated in a enhancement mode. In case of the GZO TFT, it operated in a depletion mode with a threshold voltage of -3.4 V, a field effect mobility of $0.023\;cm^2/(V{\cdot}s)$, a on/off ratio of $2{\times}10^4$ and a gate voltage swing of 3.3 V/decade. We successfully demonstrated that the TFTs with the enhancement and depletion mode type can be fabricated by using pure ZnO and 1wt% Ga-doped ZnO.

• Electrical & Electronic Materials
• /
• v.9 no.10
• /
• pp.1019-1026
• /
• 1996

In this study, we may be presented the carrier oscillation properties for the low-voltage varistor fabricated by a new method of three composition seed grain, in order to analyze the behavior of carriers at the its equivalent circuit model. The oscillation phenomena of carriers appeared from current-voltage characteristics under knee voltage is shown by the transient flow of nontrapped carriers group in the trap level of intergranular layer, surface state and/or depletion layer. In particularly, current oscillation phenomena is hardly shown in the high electric field. It is that the injected carriers from both electrodes are directly from the conduction band of forward biased ZnO grain through the intergranular layer into the reverse biased ZnO grain, because the trap level in the electric field above the knee voltage is mostly filled.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.12
• /
• pp.4291-4296
• /
• 2011

Gravitational SPLITT fractionation (GSF) provides separation of colloidal particles into two subpopulations in a preparative scale. Conventionally, GSF is carried out in a thin rectangular channel having two inlets and two outlets at the top and bottom of the channel, respectively. And the channel is equipped with two flow-splitters, one between the top and bottom inlets and another between the top and bottom outlets. A large scale splitter-less GSF system had been developed, which was designed to operate in the full feed depletion (FFD) mode. In the FFD mode, there is only one inlet through which the sample is fed, thus preventing the sample dilution. In this study, the effect of the sample-loading (in the unit of g/hr) on the fractionation efficiency (FE, number% of particles in a GSF fraction that have the sizes expected by theory) of the new large scale splitter-less FFD-GSF system was investigated. The system was tested in the sample-loading range of 3.0-12.0 g/hr with polyurethane latex beads (PU) and sea-sediment. It was found that there is an optimum range in the sample-loading for a FFD-GSF separation. It was also found that there is a general tendency of FE decreasing as the concentration of the sample suspension increases.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.10
• /
• pp.24-31
• /
• 2003

Short channel effects (SCE) of bulk MOSFET with super-steep retrograded channels (SSR), fully-depleted SOI, and double-gate MOSFET have been analyzed using a evanescent-mode analysis. Analytical equations of the characteristics scaling-length (λ) for three structures have been derived and the accuracy of the calculated λ was verified by comparing to the device simulation result. It is found that the minimum channel length should be larger than 5λ and the depletion thickness of the SSR should be around 30 nm in order to be applicable to 70 nm CMOS technology. High-$textsc{k}$ dielectric shows a limitation in scaling due to the drain-field penetration through the dielectric unless the equivalent SiO2 thickness is very thin.

• Journal of Distribution Science
• /
• v.12 no.6
• /
• pp.67-79
• /
• 2014

Purpose - This study aims to accomplish three major research goals. First, it strives to change consumers' focus from peripheral routes to a central route of public service advertising related to the good health policy, without problematic effects, by influencing consumers' knowledge or involvement. Second, this study examines the elaboration likelihood model (ELM) and construal level theory (CLT). Specifically, we consider that the central route of ELM might correspond with the focal goal of CLT. Third, this study analyzes ELM through CLT. That is, ELM predicted that low involvement would take the peripheral route, and high involvement would take the central route. Research design, data, and methodology - This study consisted of three experiments. The first experiment had a 2×2 between-subject design. The subjects were university students and the research period was approximately one year. The first independent variable was the involvement of the overweight issue; this variable was measured and split by the median. The second independent variable was the temporal distance (near vs. distant future); this variable was manipulated. The second experiment also had a 2×2 between-subject design. The first variable was the involvement of cervical adenocarcinoma prevention, and was considered already manipulated by sex. Specifically, males had a low involvement of the disease, but females had high involvement. The second independent variable was priming (power vs. submissive). Power priming would induce abstract thinking, but submissive priming would take concrete processing. The third experiment had a 2×2×2 between-subject design. The first variable was cognitive depletion, and was manipulated by memorizing 9-digit numbers. The second and third independent variables were involvement and abstract thinking induction, such as prior experiments. Data were collected through questionnaires, and were analyzed by an SPSS program. Major hypotheses were tested by examining the interaction effects through ANOVA. Results - Major findings are as follows. First, even for low-involved consumers in the overweight category, distant future manipulation induced them to focus not on the peripheral route but on the central route of the public service advertisement. This result does not correspond to the typical ELM prediction. Second, under power priming, low-involved males of the cervical adenocarcinoma category focused on the peripheral route because of the induction to abstract thinking. This result replicated the first experiment, and confirmed the theoretical robustness. Third, high-involved females focused not on the central but on the peripheral route under the mixed condition of cognitive depletion and near future manipulation. Depletion consumed cognitive resources, and the processing mode of consumers changed from systematic to heuristic. Conclusions - ELM needs to be complemented through CLT in context of public service good health advertising. Specifically, the involvement of ELM may impact consumers' thinking mode (abstract vs. concrete), and the interaction effects may influence consumers' focus on advertising (central vs. peripheral route). This study's limitations were bounded subjects, limited stimuli, and somewhat weak external validity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.826-829
• /
• 2009

The authors report on the fabrication of p-type depletion mode inverter that composed of two pentacene based thin-film transistors (TFTs) on several dielectric surfaces. We use shift of threshold voltage depends on pentacene-thickness.

• ETRI Journal
• /
• v.39 no.1
• /
• pp.62-68
• /
• 2017

In this paper, we present the design and characterization analysis of a cascode GaN field-effect transistor (FET) for switching power conversion systems. To enable normally-off operation, a cascode GaN FET employs a low breakdown voltage (BV) enhancement-mode Si metal-oxide-semiconductor FET and a high-BV depletion-mode (D-mode) GaN FET. This paper demonstrates a normally-on D-mode GaN FET with high power density and high switching frequency, and presents a theoretical analysis of a hybrid cascode GaN FET design. A TO-254 packaged FET provides a drain current of 6.04 A at a drain voltage of 2 V, a BV of 520 V at a drain leakage current of $250{\mu}A$, and an on-resistance of $331m{\Omega}$. Finally, a boost converter is used to evaluate the performance of the cascode GaN FET in power conversion applications.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_3
• /
• pp.1199-1206
• /
• 2022

Fossil fuels are one of the various energy sources used by humans, and industrial development has been achieved by relying on fossil fuels for a long time in the past. In order to respond to the depletion of fossil fuels and climate change, the world is trying to build an eco-friendly energy ecosystem. Research on efficiency improvement using renewable energy and ESS in various ways for energy conversion is being promoted. In this paper, a microgrid for industrial complexes was designed, constructed, and demonstrated. It was operated in two modes: an independent mode that each plant generates and uses independently and a connected operation mode that allows energy sharing between factories. In the case of independent mode, PV and PCS were intermittently stopped and restarted according to the status change of SoC section of each site. But, in the case of the connected operation mode, stable power supply was confirmed through power transaction through the operation of the entire SoC. This paper presented and verified an algorithm to stably supply power to industrial complexes consisting of various consumers with different load characteristics.

• Preventive Nutrition and Food Science
• /
• v.1 no.2
• /
• pp.269-277
• /
• 1996

Bacteriocins are proteins produced by a heterogeneous group of bacteria that have a bactericidal effect on closely related organisms. Recently, bacteriocins from lactic acid bacteria and other food-related organisms have been the subject of much research because of their potential as food biopreservatives. Various modifications of agar plate diffusion assays are the most widely used methods even though the limitations of such assays are generally recognized. The ability to obtain a concentrated crude preparation on bacteriocin by optimizing production parameters greatly simplifies recovery of bacteriocin on subsequent purification steps. Some studies performed to optimize bacteriocins have been purified to homogeneity, and the amino acid sequences of many of these purified bacteriocins have been determined. Obtaining characterization data on purified bacteriocin will minimize the risk of overlapping of research and confusion on identification of these compounds. Several me-chanisms leading to cell death have been hypothesized. These include depletion of the proton motive force(PMF) across the cell membrane: RNase and/or DNase activity within the sensitive cell; and pore formation and lysis of sensitive cells at the cell membrane.

• The Korean Journal of Physiology and Pharmacology
• /
• v.8 no.2
• /
• pp.101-110
• /
• 2004

Voltage-sensitive release mechanism was pharmacologically dissected from the $Ca^{2+}-induced\;Ca^{2+}\;release$ in the SR $Ca^{2+}$ release in the rat ventricular myocytes patch-clamped in a whole-cell mode. SR $Ca^{2+}$ release process was monitored by using forward-mode $Na^+-Ca^{2+}$ exchange after restriction of the interactions between $Ca^{2+}$ from SR and $Na^+-Ca^{2+}$ exchange within micro-domains with heavy cytosolic $Ca^{2+}$ buffering with 10 mM BAPTA. During stimulation every 10 s with a pulse roughly mimicking action potential, the initial outward current gradually turned into a huge inward current of $-12.9{\pm}0.5\;pA/pF$. From the inward current, two different inward $I_{NCX}s$ were identified. One was $10\;{\mu}M$ ryanodine-sensitive, constituting $14.2{\pm}2.3%$. It was completely blocked by $CdCl_2$ (0.1 mM and 0.5 mM) and by $Na^+-depletion$. The other was identified by 5 mM $NiCl_2$ after suppression of $I_{CaL}$ and ryanodine receptor, constituting $14.8{\pm}1.6%$. This latter was blocked by either 10 mM caffeine-induced SR $Ca^{2+}-depletion$ or 1 mM tetracaine. IV-relationships illustrated that the latter was activated until the peak in $30{\sim}35\;mV$ lower voltages than the former. Overall, it was concluded that the SR $Ca^{2+}$ release process in the rat ventricular myocytes is mediated by the voltage-sensitive release mechanism in addition to the $Ca^{2+}-induced-Ca^{2+}\;release$.