• Nuclear Engineering and Technology
• /
• 제56권9호
• /
• pp.3898-3903
• /
• 2024

There is a lack of available data on the radioactivity levels of these materials, despite the potential risks they may pose to patients, dental technicians, and dentists. A total of forty samples were collected from different dental markets in Egypt. Using an NaI(Tl) detector, the gamma-ray spectrometer measured the activity levels of uranium-238, radium-226, thorium-232, and potassium-40. The findings revealed that the mean concentration of ²³⁸U (below the minimum detectable activity, MDA), ²²⁶Ra (135 ± 5 and 132 ± 5 Bq/kg), ²³²Th (187 ± 4 and 243 ± 8 Bq/kg), and ⁴⁰K (1560 ± 52 and 2501 ± 89 Bq/kg) in feldspar and zirconia (ZrO₂) dental ceramic samples, respectively, were all within the limits established by the International Organization for Standardization (ISO) and the European Commission (EC). The use of feldspar and zirconia dental ceramics to restore all teeth would result in an estimated maximum beta dose of 1.5 mGy/year to the oral tissue. The results suggest that there is no cause for concern regarding any additional beta dose to the oral cavity from the use of feldspar and zirconia dental ceramics.

• 대한치과기공학회지
• /
• 제38권3호
• /
• pp.225-235
• /
• 2016

Purpose: The purpose of this study aims to improve self-confidence, satisfaction and self fulfillment of dental technology students through practical skills competitions to meet the levels required by the industry. Method: The questionnaire was composed of 12 general characteristics, 23 self-efficacy, 25 practice satisfaction, 5 self-satisfaction, 12 self fulfillment out of 77 questions. The reliability of the surveys showed Cronbach' ${\alpha}=0.893$ on the self-efficacy, Cronbach' ${\alpha}=0.871$ on the practice satisfaction, Cronbach' ${\alpha}=0.857$ on self-satisfaction and Cronbach' ${\alpha}=0.941$ on self fulfillment. Results: Before and after the test result comparison showed a statistically significant difference for both men and women according to the general characteristics. Women's progress was higher than for men. The thought about dental technicians has changed for the better and showed a statistically significant difference. Subjects who have 3.1~3.5 school record showed the highest score on job skills, self-efficacy, practice satisfaction, self-satisfaction and self fulfillment according to the the general characteristics, and 3.6 ~ 4.0, 3.0 or less and 4.1 ~ 4.5 in order. Conclusion: This study was conducted with dental technology students who participated in practical skills competitions after 10 week 40 hours training in D college, and the results were as follows. Practical training improved the job performance, self-efficacy, practice satisfaction, self-satisfaction and self fulfillment improved significantly.

• 대한치과기공학회지
• /
• 제11권1호
• /
• pp.5-22
• /
• 1989

We investigated 974 male and female students who are in 4th, 5th and 6th year of 8 elementary schools are located win Puan-kun, the farm area of Chollabuk-do, and the results are as follows. 1. Visiting dental clinic in order to be treated for dental caries hold the highest rate as 26.1% of male students and 30.3% of female students. 2. On fear when children visit dental clinic, first, 25.6% of male students and 35.1% of female students mark the highest rate as some what fear. Second, 23.1% of male students represent to be usual and 29.4% of female students represent to be very fear. There fore it speaks for dissimilarity in character between male and female students. 3. On reason of developing dental caries, 62.5% of male students and 55.8% of female students replied that it was developed because they frequently ate the sweet things. 4. Children who pull out decidous teeth alone mark the highest rate as 44.7% of male students and 38.6% of female students. 5. On important thing for ordinary dental health, 56.2% of male students and 58.5% of female students as the highest rate replied that they often brushed their teeth.

• 대한치과기공학회지
• /
• 제34권3호
• /
• pp.315-324
• /
• 2012

Purpose: The purpose of this study was to survey dental prosthesis and dental prosthesis needs of elderly for improving oral health status. Methods: The data collected from 'The fifth Korean national health and nutrition examination survey 2010' was analyzed in this study. Statistical analysis was done using the Statistical Package for Social Sciences version 19.0 for Windows. We determined frequencies and percentage, calculating means, and standard deviations, and determined statistical significance using cross-tabulation analysis, logistic regression analysis. Results: General characteristics showed differences in mandible fixed crown bridge needs associated with periodontal disease. General characteristics showed differences in maxillar partial and full denture with gender, age, education, perceived oral health. General characteristics showed differences in mandible partial and full denture with age, residence, education, perceived oral health. Conclusion: In order to improve oral health of the elderly, Dental prosthesis support policy and oral health policy are necessary.

• 대한치과기공학회지
• /
• 제35권4호
• /
• pp.313-320
• /
• 2013

Purpose: The purpose of this study was to know the physical properties of UDMA dental composite resins containing two photosensitizers, PD, DA, as a photosensitizer instead of CQ. We want to know Remaining Double Bond(RDB) of UDMA unfilled resin and diametral tensile strength and flexural strength of composite resin containing PD and DA were compared with those of CQ, most widely used photosensitizer for dental composite resins. Methods: The RDB of UDMA studied by FT-IR spectroscopy increased with irradiation time. The composite resins were tested for their physical properties. The dental composite resins were made with UDMA as a monomer, silanized silica as filler, N,N-dimethylaminoethyl methacrylate (DAEM) as amine initiator, and one of the two kinds of new photosensitizers. Results: The relative RDB of UDMA was in the order: DA > CQ > PD but the physical properties of the composite resins show PD and DA with higher results compared with that containing CQ. The reason for the results is that PD and DA serve not only as a photosensitizer but also as a photo-crosslinking agent. Conclusion: PD and DA show as effective photosensizers, suitable for UDMA dental composite resin compare with a higher efficiency than CQ.

• 대한치과기공학회지
• /
• 제42권3호
• /
• pp.272-280
• /
• 2020

Purpose: This study aimed to determine dental technicians' job satisfaction levels and to assess its influence on turnover intention. Methods: We included 230 dental technicians who work within Seoul, Incheon, Daejeon, the Gyeonggi Province, and the Chungcheongnam-do Province. We carried out a self-reported survey using a structured questionnaire. Results: As a result of assessing the research subjects' job satisfaction level, we found that there was a significant difference in working hours and a dental-work continuing plan sphere (p<0.05). Achievement & self-realization factors, the human relation factor, and growth & development factors were reported to be major job satisfaction indices. The whole average of the job satisfaction level came to 3.11, thereby appearing to be relatively high. In analyzing the research subjects' turnover intention, there was a significant difference in age, task field, dental-work career, working hours, incumbency, and dental-work continuing plan sphere (p<0.05). The question average for turnover intention was 2.88. As a result of assessing a correlation between job satisfaction and turnover intention, a significant negative (-) correlation was found between job satisfaction and turnover intention. Thus, a higher job satisfaction level was observed to lead to a lower turnover intention. Conclusion: As a result of conducting a regression analysis in order to assess the influence of job satisfaction on a turnover intention, a working condition factor, a human relation factor, and a recognition factor each appeared to have a high impact.

• 대한치과기공학회지
• /
• 제38권4호
• /
• pp.263-272
• /
• 2016

Purpose: The purpose of this study is to measure and compare a degree of setting expansion of dental stone by time depending on the mixing methods and mixing ratios of dental stone, to compare the surface state of each specimen with the use of an optical camera with microscope, and thereby to provide a fundamental material for making dental prostheses. Methods: The test on setting expansion of dental stone is based on ISO 6873. With two different mixing ratios and three kinds of stone mixing methods, test groups were created, and a total of six types of specimens (N=30) were made. Based on the specimens, the setting expansion rate of each one was measured in each time slot of 24 hours, and the surface of the set stone was measured. Results: According to the analysis on setting expansion rate of stone, the setting expansion of the specimen that was created in the way of vacuum mixing at normal mixing ratio was 0.1944% at 120 minutes; the setting expansion of the specimen that was created in the way of vacuum mixing at the mixing ratio which was 40% higher than normal mixing ratio was 0.195% at 120 minutes; the setting expansion of the specimen that was created in the way of mixing with hands at normal mixing ratio and then removing bubbles in vacuum mixer was 0.196% at 120 minutes. Conclusion: The setting expansion rate of each dental stone specimen was significantly different with the lapse of time up to 24 hours(p<.001).

• 대한치과기공학회지
• /
• 제34권3호
• /
• pp.303-314
• /
• 2012

Purpose: This study aimed to find overseas workplace and improve global competence through the preference survey on overseas employment by dental technology students. Methods: The survey sample consisted of 250 randomly selected dental technology students. Survey was conducted from March 1 to May 1 in 2012. Total of 245(98.0%) replies and analyzed 236 questionnaires excluding 9 incomplete questionnaires. The questionnaires used in this study consisted of 7 items for general information, overseas employment characteristics of 10 items, 7 items for overseas employment activation plane and job competency development of 7 items. Collected data were analyzed using SPSS(Statistical Package for Social Sciences) Win 19.0 statistics program. Results: Regarding general characteristics of the subjects, there were 131 third graders(55.5%), 63 first graders(26.7%) and 42 second graders(17.8%) among 130 males(55.1%) and 106 females(44.9%). 221(93.6%) of the subjects had no experience in language training. Students who had clinical training for 1-5 months were 123(52.1%), and 24(10.2%) students had more than six months. 89(37.7%) of the subjects had no clinical training. 155(65.7%) of the subjects hope to work with korean owner, and 81(34.3%) chose foreign owner. Favored working countries were Australia(41.5%), the United States(29.2%), Canada(18.2%) and other(11.0%). The field of dental ceramic was indicated to be the highest proportion of 104(44.1%). Period of training were 3 hours(40.3%) and 6 hours(35.2%). The most important training were language-centered education(54.2%), Job-oriented education(24.2%), local culture education(16.1%), other(3.0%) and Leadership Training(2.5%). The subjects chose overseas worker(44.9%), working-level practitioner (28.8%), successfully employed dental technology graduate(19.5%a) and professor(3.4%) as an instructor. The subjects get education and training information from professor(40.3%), other(28.0%), senior(14.4%), job site(8.9%) and acquaintance(8.5%). A credit exchange(2.46 points), a joint degree program(2.46 points), and a foreign professor(2.33 points) were needed to activate the overseas employment. A kind of dental prosthesis(3.58 points), carving tooth morphology(3.38 points), and majors of dental technology(3.30 points) were indicated to develop job competency for overseas employment. Age, year, clinical training experience and company owner were statistically meaningful data among the general characteristics affecting job competency development. Conclusion: The college needs to offer variety programs such as foreign language-centered education and a local job competency development program to graduates to be connected with international workplace and employment.

• 대한치과기공학회지
• /
• 제5권1호
• /
• pp.5-11
• /
• 1983

In order to ascertain the aspects of the dental technicians training system which require improvement, and also to provide important data for use in setting up dental technicians manpower planning, our country's dental technicians training and employment status has been studied and analyzed. The objects of the survey are 1896896 dental and Social Affairs from 1965 to 1982. The results were as follows; 1. Education organs for dental technicians are education system such as health junior college and service training systems. About 965 dental technicians have come from the service training systems and 931 technicians have come from health junior college in our country. 2. Total number of employment of dental technicians employed in our country are 820, and 292 of them are engaged in Seoul, So unbalanced employment of dental technicians will be troubled in a future. 3. All registrated to government are 1,896 till 1982 and 820 of them engaged are that is, we can suppose about employment of dental technicians in a future, 3,746 dental technicians will registrate to Health and Social Administration an 1992, and 1,482 of them will be able to take their job in Korea.

• 대한치과기공학회지
• /
• 제40권3호
• /
• pp.151-162
• /
• 2018

Purpose: The main purpose of this study is to develop assessment measures for the quality of service for dental labs. Methods: In order to construct the measure of service quality assessment for dental labs, relevant modifications were extracted around theoretical studies, and the survey was conducted on dental technician workers through internet survey. final scale questions were extracted through exploratory factor analysis and confirmed factor analysis of measurement variables, the demographic characteristics of the subjects and the perceptual difference of dental labs were analyzed for the extracted variables. Results: The final five variants of the interactive factor analysis that include the ability to change employee growth, reliability, responsiveness, materiality, interoperability, confirmatory factor analysis excludes variations in employee growth wages, welfare benefits, by changing its name to network capabilities, the quality of service factors for the final dental labs consisted of five variations: network competence, reliability, responsiveness, materiality and interoperability. Conclusion : The service quality of the dental labs showed that the reliability of the product related to the dental materials and the product production responsiveness related to the production order, the Materiality of the materials and equipment of the dental labs, the Interoperability responsiveness related to dental orders, And the importance of network capability to form a mutual network.