• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.3
• /
• pp.265-271
• /
• 2020

Automotive radar that is one of the most important equipment in high-tech vehicles, is commonly used to detect the speed and range of objects such as cars. In this paper, in addition to objects detection, a method of retrieving precipitation information using the automotive radar data is proposed. The proposed method is based on the fact that the degree of attenuation of the returned radar signal differs depending on the precipitation intensity and the assumption that the distribution of precipitation is constant in short spatial and temporal observation. The purpose of this paper is to assesses the possibility of retrieving precipitation information using a vehicle radar. To verify the feasibility of the proposed method during actual driving, a method of estimating precipitation information for each time segment of various precipitation events was applied. From the results of driving field experiments, it was found that the proposed method is suitable for estimating precipitation information in various rainfall types.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.771-786
• /
• 2006

Imha lake has a high turbid water which keeps up during a few months, as comparing to other dams. Origins of the high turbid water derive from suspended materials which compose of micro particles of clay and rock-forming minerals. They are the weathered products from surface rocks that relate with particular geology in drainage field of the Imha dim. Accordingly we have fundamentally surveyed the kinds, properties, distribution and structures of general geology, found a few particular geology that source clay materials, and traced the passage that their weathered products enter the dam. We have suggested the basic origins of increase in turbid degree from detecting kinds and behavior of the suspended materials cause high turbid water in the Imha lake.

• Microbiology and Biotechnology Letters
• /
• v.28 no.2
• /
• pp.71-79
• /
• 2000

Two typess of copolyesters, poly(3-hydroxybutyric acid-co-4-hydroxy-butyric acid)[P(3HB-co-4HB] and poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid)[P(3HB-co-3HV)], with various monomer ratios and different degree of microstructural heterogeneity were synthesized from Ralstonia eutropha H16 and Hydrogenophaga pseudoflava by using ${\gamma}$-butyrolactone and ${\gamma}$-valerolactone, respectively. The two bacteria showed a large difference in the utilization of ${\gamma}$-butyrolactone for cell growth and PHA synthesis. H. pseudoflava synthesized P(3HB-co-4HB) copolyesters with a wide range of 4HB content from 13 to 96 mol% depending on culture conditions, whiel R. eutropha H16 was able to synthesize the copolyesters containing less than 20 mol% of 4HB. An increase in the 4HB content in the P(3HB-co-4HB) copolyesters synthesized by H. pseud-oflava induced an lowering of their melting temperatures as well as their enthalpies of fusion. The increase in the 4HB content, however, increased the rate of degradation by an extracellular P(3HB) depolymerase. NMR spectros-copy and differential scanning calorimetry showed that the P(3HB-co-4HB) copolyesters from H. pseudoflava were generally microstructurally heterogeneous. The P(3HB-co-4HB) copolyesters) synthesized by R. eutropha H16 were rather random copolymers showing less microstructural heterogeneity than those synthesized by H. pseudoflava. The NMR D value analysis suggested that the monomer distribution of the P(3HB-co-3HV) copolymers from the two bacteria were relatively random.

• The Journal of Engineering Geology
• /
• v.17 no.1 s.50
• /
• pp.89-99
• /
• 2007

This paper intends to introduce more objective and qualitative rock mass classification method easily applicable to the excavation of gneissic masses showing corestone weathering profiles. It is proven that corestone weathering profile could be divided with reasonable accuracy into digging, ripping and blasting layers using visual and simple mechanical techniques such as Schmidt hammer rebound test on cut slopes, taking into consideration strength and spacial distribution of corestone, workability and work efficiency of excavation. Also, seismic refraction surveys were employed for shallow investigations (down to $20{\sim}30m$ depth) in corestone weathering profile and conducted across the top of vertical exposures where the underlying geology could be directly inspected. Some discrepancies ($3{\sim}4m$ in average and 6 m occasionally) between the actual and assumed materials with respect to seismic velocities were observed. Thus it can be concluded that field geotechnical mapping and field seismic test should be used together in order to get a relatively good accuracy in assessing likely excavation conditions of corestone weather-ing profiles.

• Journal of the Korean Society of Food Culture
• /
• v.14 no.4
• /
• pp.333-352
• /
• 1999

This study investigates the impact of International Monetary Fund(IMF) Age on the household behavior of food consumption and analysis the related factors(demographic variables, family life style) to find out the reasonable consumer's consciousness and food market conditions. The results are as follows. 1. General life style and food life style, considered as family life style, were classified into 7 types and 9 types respectively as family life style by factor analysis. 2. The rationality of using and disposing stage on food life has increased, the rationality of the planning stage on food life has decreased since the IMF age began. But the rationality of overall food consumption has hardly changed. 3. The amount of purchasing was decreased, discount store was favorite place to buy food, and safety and freshness were major determinants in purchasing for most of food items. But this was different with food items. The various information sources were used impartially to buy food, cash was used mainly, and the degree of using the discount ticket/coupon was a little low. 4. Income level is an influential factor on the rationality of the planning and purchasing stage on food life, while environment-oriented food life style has influenced on the rationality of using and disposing stage. The purchasing amount of grain products, meats, milk products, bread and snacks, drinks, alcoholic drinks, water and convenience goods has influenced by demographic variables, eating out had been influenced by general life styles, and fruits, healthy foods, processed foodstuffs, favorite foods, vegetables seaweeds, import foods and seafood had been mainly influenced by food life style since IMF age began.

• Journal of Korean Physical Therapy Science
• /
• v.16 no.3
• /
• pp.55-66
• /
• 2009

Background: The purpose of this research was to investigate the factors affecting the low back pain of workers in hospital. 214 subjects waking at two general hospitals in Yosu city participated in this survey. Subjects consisted of doctors, nurses, medical engineers, officers and general laborers. The survey data were collected by a written questionnaire which made out by themselves for 25 days, from fourth August to 29th August, 2008. Methods: The questionnaire consisted of four categories, general, occupational, working habitual and the daily living characteristics. The collected data were analyzed by Chi-square test based on the present or absent of low back pain. Results: 1. In the general characteristics, low back pain had no significant relationship to all factors, sex, ago, body mass index, weight and height. 2. In the occupational characteristics, the phase of distribution of low back pain had statistical significant differences in the working hours a week, satisfaction of pay, satisfaction of occupation(p<0.05). However low back pain did not significantly related to the kind of occupation, period of work and degree of stress. 3. In the habitual characteristics, low back pain was significantly influenced by working posture, frequency of using lumbar and heavy material lifting, monotonous repetition of working operation and noise(p<0.05). No significant difference was shown in the factor of convenience of chair. 4. In the daily living characteristics, low back pain shown the significant differences in walking time a day, status of health and smoking pattern(p<0.05). there were, however, no significant differences in the aspect of the kind of house and bed, sleeping attitude, driving, riding time on the vehicle, exercising, frequency of cultural life and drinking alcohol. Conclusion: when I see above resultants totally, it appears a higher incidence caused by working environment rather than living habit and then consequently compared to hospital workers, they also have high incidence like others. In order to reduce incidence of low back pain and enjoy the our life we need to educate ourselves preventing program for low back pain and try to effort for preventing of low back pain on each department and individual.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.28 no.2
• /
• pp.63-73
• /
• 1986

The model was developed by applying the principles of Bacot and Vidal to measure the behavior of deformation of the reinforced earth wall, and various tasts were performed by using the plastic fabric filter and the galvanized steel plate as a strip. The results obtained are as follows; 1. When the reinforced earth wall is deformed by the load, the strip is completely reinforced by the backfill materials and changed to the rigid block state, under the state of failure which permits sliding only, the next theoretical equation is formed. (H/L) . tan$\theta$ [cosO-sinOtanO] =2sinO[tan($\theta$ +0) +tanO] 2.The degree of the mutual reinforcement of the backfill material and the strip depend on the physical characteristics of the each material especially the angle of shearing resistance of the backfill material is desirable over 20$^{\circ}$ and, if it is over 400, its function could be a maximum. 3.The distribution of the maximum tensile strain of the reinforcement is changing with the height of reinforced earth wall, and when the height from bottom of the reinforced earth wall is 1.85 to 3. 35m, the maximum tensile strain appears at 2m from the skin element. The maximum tensile strain is increased by the depth of the reinforced earth wall from surface, and increased with the lapse of time after construction. 4.The failure surface of the reinforced earth wall by the concrete skin was about 60$^{\circ}$and the failure behavior of the reinforced earth wall in which the fabric filter was buried was slow, and so the pore pressure could be decreased. 5.It is possible to construct the fabric retained earth wall by the plastic fabric filter only. And the reinforcing effect between the steel plate and the plastic fabric filter is not largely different. however, in the aspect of the economic durability, the plastic fabric filter is more advantageous. 6.The reinforcing action mainly depends on the width and the length of the reinforcing materials, if possible, the full width is advantageous to enlarge the contact area with backfill. but considering the economic aspect, it is neccessary to develop the method controlling the space of the strip.

• Journal of Biosystems Engineering
• /
• v.9 no.1
• /
• pp.11-21
• /
• 1984

This study was intended to analyze the dynamic force system which induced the shattering of paddy grains. A model to predict the shattering of paddy grains was developed, and physical quantities, such as mass distribution and rigidity of rice plant, needed for evaluating the minimum shattering forces were also measured. Under the assumption that rice plant right before harvesting is a vibratory system, the mathematical model of the vibratory system was developed and solved with the varied conditions of forcing functions. The results of the study were summarized as follows: 1. The shattering of grain occurred at the abscission layer of grain by the bending moments resulted from the impact force due to the collision of panicles of rice plant. 2. The vibratory model developed for milyang 23 rice variety was analyzed to give the natural frequencies of 7-9 Hz, which were closely related with the excitation frequencies of 4-10 Hz caused by various machine parts besides engine. Thus, avoiding the resonance should be taken into consideration in the design of the harvesting machinery. 3. It was analyzed to predict the lowest frequency that could develop the shattering when the excitation force was applied to the lower end of stem. The lowest frequency for the Milyang 23 rice variety ranged from 8.33 Hz to 11.66 Hz as the amplitude varied from 1 cm to 2.5 cm. 4. The degree of shattering depended upon the magnitude of the impact force and its application point. For Milyang 23 rice variety, the minimum impact force developing the shattering was $5g_f$ when it was applied at 1 cm above the lower end of stern and $1g_f$ when applied at 5 cm above the lower end of stem. 5. The minimum colliding velocity of the panicle, when it was on the ground that would just develop the shattering, was given as follows, $$V=\sqrt{\frac{K_t}{m_g}{\cdot}{{\phi}^2}}$$ where V : The colliding velocity of the panicle against ground to cause the shatteering of rice grain. (cm/sec) $K_t$ : The minimum spring constant for bending at the abscission layer of grain. (dyne-cm/rad) ${\phi}$ : The minimum shattering angle of grain (rad) $m_g$ : The maximum mass of grain. (g).

• Nutrition Research and Practice
• /
• v.3 no.2
• /
• pp.141-148
• /
• 2009

The purpose of this study was to investigate the degree of family support for diabetic patients and the diet therapy practice of patients themselves, and to analyze the relationship between family support and diet therapy practice and blood glucose control, and thus to prepare basic data for the development of effective education programs to improve blood glucose control in diabetic patients. The study subjects were 82 patients with type II diabetes, aged over 20 in the Chungbuk area. The gender distribution of subjects was 52.4% males and 47.6% females, and BMI showed 29.3% overweight and 35.3% obesity. Among the 82 study subjects, the relationship between diet therapy related family support and blood glucose control was examined in 67 subjects who answered practicing diet therapy, and the results showed that the family support score of a group with excellent blood glucose control was significantly higher than those of groups with fair or poor control (p<0.001) and the correlation between the two factors was very high (r=0.341, p<0.001). For the relationship between diet therapy practice by patients themselves and blood glucose control, diet therapy practice of a group with excellent blood glucose control was significantly higher than those of other groups (fair or poor control groups) (p<0.001) and the correlation between two factors was very high (r=0.304, p<0.001). For other factors influencing blood glucose control, a group with diabetes education showed significantly better blood glucose control compared to other groups without education (p<0.05). From the above results, diet therapy practice by patients, family support, and the necessity of diabetes education were confirmed to control blood glucose of diabetic patients. In conclusion, development and operation of education program should include not only patients but also their family members.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.436-444
• /
• 2011

As practical use degree of multicasting increase, security for multicast is recognized as an important issue. Previous research in the area of secure multicast has mainly focused on group key management. The most important thing about the security of multicast is that only authorized members of this group will be able to access the data. The member of access to multicast communication is to use cryptography with a common shared session encryption key. We propose decentralized group key management based on agent for dynamic multicast with large groups and frequent joins or leaves in this paper. Whole group divide to several subgroup using agent technology and each agent manage members of each subgroup. Also, when rekeying updates that using one-way hash function can prevent the key exposure, and reduce the key distribution delay.