• 제목/요약/키워드: defect frequency

검색결과 430건 처리시간 0.03초

직선 운동 유닛의 감시 및 진단 시스템 개발 (Development of Monitoring and Diagnosis System for Linear Motion Unit)

  • 황젠;김화영;안중환
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2012년도 추계학술대회 논문집
    • /
    • pp.635-636
    • /
    • 2012
  • In the present work, investigations by high frequency resonance technique for diagnosis of defect frequencies of linear motion unit are reported. Raw vibration signature of the moving parts at different speeds of operation has been demodulated. Envelope detected spectrum is analyzed to evaluate various defect frequencies and their energy levels. Experimentally evaluated frequencies are compared with theoretically determined defect frequencies. These frequency values and their energy levels are used to monitor intrinsic condition of linear motion unit as well as to establish severity of existing/developed defects on the LM guide and inside the LM block. Relative comparisons of linear motion units of the same type are made at various operating speeds under identical conditions of operation on the basis of identified defect frequencies and severity of defects.

  • PDF

초음파스펙트럼해석법을 이용한 고정도 결함평가 (A Study on Highly Accurate Evaluation Technique using Ultrasonic Spectrum Analysis Method)

  • 노승남
    • 한국생산제조학회지
    • /
    • 제6권2호
    • /
    • pp.76-82
    • /
    • 1997
  • The discrimination of flaw shape and sizing is very important subject in the material evaluation for semiconductor and new materials. The aim of this paper is to investigate the spectrum analysis of artificial defect signal captured from steel ball embedded in the resin. The results show that it can be evaluated quantitatively the size of artificial defect, from the amplitude variation of same frequency if the probe with same diameter and focal length is used. Comparing with the amplitude variation of the high frequency component and low frequency component obtained from the distance of defect center position, it can be estimated steel ball and flat bottm defect.

  • PDF

위상잠금 열화상기법을 이용한 치과용 복합레진 수복재의 내부 홀 결함에 대한 비파괴평가 (NDE of the Internal Hole Defect of Dental Composite Restoration Using Infrared Lock-In Thermography)

  • 구자국;최낙삼
    • 비파괴검사학회지
    • /
    • 제33권1호
    • /
    • pp.40-45
    • /
    • 2013
  • 위상잠금 적외선열화상기법을 이용하여 치과용 복합레진 수복재의 내부 홀 결함 크기에 따른 검출 가능성을 연구하였다 위상잠금 주파수 조건을 다르게 하며 진폭과 위상영상을 분석하였다. 진폭 이미지 분석을 통해 직경 2 mm 이상의 결함 검출이 가능함을 알았으며 0.05 Hz 부근에서 결함부의 구별이 뚜렷하고 선명한 이미지를 획득할 수 있었다. 진폭 대비차는 결함부의 직경 크기에 비례하였다. 위상 이미지 분석 결과 0.3-0.5 Hz 부근에서 최적의 대조 영상을 보였으며 0.006 Hz 에서는 반대 명암의 뚜렷한 이미지를 얻을 수 있었다. 진폭 분석보다 위상 분석에서 결함부 크기가 작은 시편의 검출 가능성이 더 높았다.

효율적인 품질관리를 위한 공동주택 하자위험 분석 (Assessment of Defect Risks in Apartment Projects based on the Defect Classification Framework)

  • 장호면
    • 한국산학기술학회논문지
    • /
    • 제20권11호
    • /
    • pp.510-519
    • /
    • 2019
  • 공동주택 설계 및 시공단계에서 다양한 하자를 사전에 예방하기 위하여 다양한 방안이 모색됨에도 불구하고, 완공 이후 다양한 하자들이 지속적으로 발생하고 있다. 이러한 공동주택 하자를 최소화하기 위해서는 하자 위험에 대한 패턴을 확인할 필요가 있다. 이러한 관점에서 본 연구에서는 공동주택 공종/하자보수보증기간/하자위치/하자유형을 고려한 하자분류체계를 설정하고, 세부적인 하자위험을 분석하였다. 이를 위하여 본 논문에서는 공동주택 하자분쟁사례 133건, 약 15,056개의 하자데이터를 토대로 분석을 실시하였다. 주요 분석결과를 살펴보면, 첫째, 공용부의 RC 공사와 관련된 주요 하자는 균열이며, 균열과 연계되어 있는 누수 및 표면불량 등도 하자위험이 높은 것으로 확인되었다. 둘째, 다양한 자재가 활용되고, 복합적인 공종이 이루어지는 마감공사의 특성에 따라 상대적으로 하자위험이 높은 것으로 나타났다. 셋째, 지하주차장에 대한 방수공사의 경우 오시공이나 미시공과 같이 재시공이 필요한 하자들의 위험도가 상대적으로 높은 것으로 확인되었다. 이를 토대로 본 연구에서는 발생위험이 높은 하자들을 LFHS, LFLS, HFLS 영역으로 구분하여 시공단계, 입주 전단계, 유지관리단계 등에서의 하자대응방안을 모색하였다.

고주파 전기 저항 용접부의 용접 결함 발생 빈도에 미치는 용접 입열 속도의 영향 (Effect of Heat Input Rate on the Weld Defect Formation during High Frequency Electric Resistance Welding)

  • 조윤희;김충명;김용석
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2000년도 특별강연 및 추계학술발표대회 개요집
    • /
    • pp.201-203
    • /
    • 2000
  • In this study, effect of welding parameters on the defect density in the weldments produced by high frequency electric resistance welding process. The defect density measured by X-ray radiography showed a W-type curve as a function of heat input rate. The mechanisms of the such behavior were discussed based on the chemical compositions of the oxides formed at the weldments.

  • PDF

구름 베어링의 결함 주파수 규명을 위한 방향 스펙트럼의 이용 (Identification of Defect Frequencies in Rolling Element Bearing Using Directional Spectra of Vibration Signals)

  • 박종포;이종원
    • 소음진동
    • /
    • 제9권2호
    • /
    • pp.393-400
    • /
    • 1999
  • Defect frequencies of rolling element bearings are experimentally investigated utilizing the two-sided directional spectra of the complex-valued vibration signals measured from the outer ring of defective bearings. The directional spectra make it possible to discern backward and forward defect frequencies. The experimental results show that the directional zoom spectrum is superior to the conventional spectrum in identification of bearing defect frequencies, in particular the inner race defect frequencies.

  • PDF

시간-주파수 영역 반사파 계측법 기반 XLPE 전력 케이블의 중성선 결함 위치 측정 연구 (Detection and Localization of Neutral Wire Defect of XLPE Power Cable Based on The Time-Frequency Domain Reflectometry)

  • 이춘구;곽기석;윤태성;박진배
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.1790-1791
    • /
    • 2011
  • In this paper, the diagnosis system for detecting and localizing the neutral wire defect in an energized XLPE power cable is proposed. The neutral wire defect is detectd and localized by the time-frequency domain reflectometry. To extract the reflected signal from the neutral wire defect, the adaptive RLS filtering is introduced. To verify the proposed method, the experiments for detecting and localizing neutral wire defect in active XLPE power cable is conducted.

  • PDF

선천성 심장병 환아에서 음향학적 요소의 변동 (Acoustic variations associated with congenital heart disease)

  • 오정은;최윤미;김선준;주찬웅
    • Clinical and Experimental Pediatrics
    • /
    • 제53권2호
    • /
    • pp.190-194
    • /
    • 2010
  • 목 적 : 애성 및 음성 변동은 심장병 환자에서 관찰될 수 있는데 이러한 음성 변동 정도를 음향학적 지표의 평가로 분석하여, 소아에서 선천성 심장병 종류에 따른 음성 변동을 음향학적 요소로 분석하고자 하였다. 방 법 : 수술 전 선천성 심장병 환아 94명을 연구 대상으로 하였고 심실 중격 결손, 동맥관 개존, 심방 중격 결손, 폐동맥 협착, 활로 사징이 포함되었으며, 음성 변동을 조사하기 위한 음향 지표 분석은 통증 자극을 통하여 얻어진 음성 자료를 multi-dimensional voice program system을 이용하여 평가하였다. 연구에 사용된 음향 지표로 average fundamental frequency, length of analyzed sample, jitter percent, shimmer, noise to harmonic ratio를 분석하였다. 결 과 : 음향 지표인 average fundamental frequency은 동맥관 개존, 심실 중격 결손, 활로 사징 경우에서 유의한 감소를 나타냈으며, length of analyzed sample은 연구 대상 선천성 심장병 환아에서 대조군에 비해 의미있는 차이를 나타내지 않았다. Jitter percent, shimmer, noise to harmonic ratio는 심실 중격 결손, 동맥관 개존, 심방 중격 결손에서 대조군에 비해 증가되었다. 이러한 음성 변동은 연구 대상 선천성 심장병 중 동맥관 개존에서 음도변이, 강도변이, 음성의 소음 정도가 가장 뚜렷하게 나타났으며, 동맥관 개존, 심실 중격 결손, 심방 중격 결손 순으로 그 음성 변동의 특징을 나타냈다. 결 론 : 수술 전 선천성 심장병 환아에서 음성을 음향학적 지표로 비교 분석한 결과 음향학적 지표들이 심장 질환의 유형별 차이를 보이는데 좌우 단락 심질환군에서 현저한 비정상적 음향학적 지표를 나타냈다.

국내 하수관로 결함빈도 분석을 통한 CCTV 조사 결함항목 코드 제안 (Suggestion of the Domestic CCTV Inspection Sewer Pipe Defect Codeby Sewer Defect Frequency Analysis)

  • 손주영;이재현;김정률;오재일;윤성수
    • 상하수도학회지
    • /
    • 제30권6호
    • /
    • pp.623-634
    • /
    • 2016
  • Sewer condition assessment involves the determination of defective points and status of aged sewers by a CCTV inspection according to the standard manual. Therefore, it is important to establish a reliable and effective standard manual for identifying the sewer defect. In this study, analytic reviews of the CCTV inspection manuals of the UK, New Zealand, Canada and South Korea were performed in order to compare the defect codes and the protocols of condition assessment. Through this, we also established the standardized method for defect code and revised the calculation method of assigning the condition grade. Analyses of the types and frequencies of sewer defects that obtained by CCTV inspection of 7000 case results, showed that the joint defect and lateral defect were the most frequent defects that occurred in Korea. Some defect codes are found to be modified because those did not occur at all. This study includes a proposed new sewer defect codes based on sewer characteristics.

Detection of tube defect using the autoregressive algorithm

  • Halim, Zakiah A.;Jamaludin, Nordin;Junaidi, Syarif;Yusainee, Syed
    • Steel and Composite Structures
    • /
    • 제19권1호
    • /
    • pp.131-152
    • /
    • 2015
  • Easy detection and evaluation of defect in the tube structure is a continuous problem and remains a significant demand in tube inspection technologies. This study is aimed to automate defect detection using the pattern recognition approach based on the classification of high frequency stress wave signals. The stress wave signals from vibrational impact excitation on several tube conditions were captured to identify the defect in ASTM A179 seamless steel tubes. The variation in stress wave propagation was captured by a high frequency sensor. Stress wave signals from four tubes with artificial defects of different depths and one reference tube were classified using the autoregressive (AR) algorithm. The results were demonstrated using a dendrogram. The preliminary research revealed the natural arrangement of stress wave signals were grouped into two clusters. The stress wave signals from the healthy tube were grouped together in one cluster and the signals from the defective tubes were classified in another cluster. This approach was effective in separating different stress wave signals and allowed quicker and easier defect identification and interpretation in steel tubes.