• ETRI Journal
• /
• 제36권6호
• /
• pp.942-952
• /
• 2014

This paper presents a novel test point insertion (TPI) method for a pseudo-random built-in self-test (BIST) to reduce the area overhead. Recently, a new TPI method for BISTs was proposed that tries to use functional flip-flops to drive control test points instead of adding extra dedicated flip-flops for driving control points. The replacement rule used in a previous work has limitations preventing some dedicated flip-flops from being replaced by functional flip-flops. This paper proposes a logic cone analysis-based TPI approach to overcome the limitations. Logic cone analysis is performed to find candidate functional flop-flops for replacing dedicated flip-flops. Experimental results indicate that the proposed method reduces the test point area overhead significantly with minimal loss of testability by replacing the dedicated flip-flops.

• 한국경영과학회지
• /
• 제23권2호
• /
• pp.47-65
• /
• 1998

We consider a multiperiod capacity planning problem for determining a mix of flexible and dedicated capacities under budget restriction. These capacities are controlled by purchasing flexible machines and/or new dedicated machines and disposing old dedicated machines. Acquisition and replacement schedules are determined and operations are assigned to the flexible or dedicated machines for the objective of minimizing the sum of discounted costs of acquisition and operation of flexible machines, new dedicated machines, and old dedicated machines. In this research, the Problem is formulated as a mixed integer linear Program and solved by a Lagrangian relaxation approach. A subgradient optimization method is employed to obtain lower bounds and a multiplier adjustment method is devised to improve the bounds. We develop a linear programming based Lagrangian heuristic algorithm to find a good feasible solution of the original problem. Results of tests on randomly generated test problems show that the algorithm gives relatively good solutions in a reasonable amount of computation time.

• 폴리머
• /
• 제29권1호
• /
• pp.48-53
• /
• 2005

타이어 마모는 자동차 드라이버들의 주요 관심 사항 중의 하나일 뿐만 아니라 타이어의 수명과 밀접하게 관련되어 있다. 자동차 타이어의 사용 조건들은 여러 가지 요인들이 함께 작용하기 때문에 타이어 마모에 대해 명확하게 규명하는 것은 쉽지 않다. 따라서, 타이어 마모를 평가하기 위해서는 실제 사용 조건에서의 마모 평가가 필요하다. 타이어의 수명과 밀접한 관련이 있는 마모를 평가하기 위하여 정해진 가혹한 주행 조건을 갖는 dedicated test를 통하여 마모 성능 시험을 실시하였다. 타이어 마모에 영향을 미치는 많은 인자들을 단순화시키기 위하여 정해진 운전자의 가혹도로 시험함으로써 운전자의 운전 습관에 따른 영향을 최소화하였다. 마모와 관련이 있는 노선 가혹도의 영향을 확인하기 위하여 노선 별로 횡가속도를 측정하여 얻어진 driving severity number(DSN)을 이용하여 DSN에 따른 타이어의 마모율과 마모 양상에 대해 비교해 보았다. 이러한 dedicated treadwear test 결과를 제공함으로써 타이어 마모 성능을 만족시키기 위한 설계에 유용한 자료를 제공할 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2107-2112
• /
• 2010

To analyze the effect of temperature on pavement types of dedicated lane, we have performed a temperature monitoring for pavements which were constructed in test track for Bimodal Tram. These pavements classified into four types; natural and artificial lawn, concrete and asphalt. Dedicated lane composed of natural and artificial lawn has a complex structure with concrete slab in contact surface of tires, and with 1m natural or artificial lawn in the middle part of lane. From monitoring results for pavements, dedicated lane with natural lawn shows lower temperature value compared with other dedicated lanes, and it is expected to decrease the heat island effect of conventional road if constructed.

• 한국지열·수열에너지학회논문집
• /
• 제7권2호
• /
• pp.37-42
• /
• 2011

Dedicated outdoor air(DOA) system which conditions the outdoor air separately is superior to conventional Cooling + reheating system with respect to energy consumption and indoor comfort. Since the sensible and latent load characteristics of indoor and outdoor are different, it is more efficient to treat them separately. In this study, cycle analysis and on-site performance test of DOA system have been conducted. The study shows that DOA requires 50% less equivalent energy than the conventional system. The on-site performance test of a prototype shows that the coefficient of performance(COP) of the DOA system is 37% higher than the conventional system.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.346-351
• /
• 2007

Dedicated outdoor air(DOA) system which conditions the outdoor air separately is superior to conventional cooling+reheating system with respect to energy consumption and indoor comfort. Since the sensible and latent load characteristics of indoor and outdoor are different, it is more efficient to treat them separately. In this study, cycle analysis and on-site performance test of DOA system have been conducted. The study shows that DOA requires 48.8% less equivalent energy that conventional system. The on-site performance test of the prototype shows that the coefficient of performance(COP) of the DOA system is 37.4% higher than the conventional system.

• 한국생산제조학회지
• /
• 제8권2호
• /
• pp.94-94
• /
• 1999

Natural gas is considered to be on e of the most promising candidates for a clean substitute fuel and a great amount of research on the compressed natural gas(CNG) fueled vehicle has been performed. In this s tudy, we try to understand the property of CNG fuel with using CNG engine experiment. In order to present the direction and application of CNG, we experiment with various operating conditions that is, spark timing, A/F ratio, air quantity and fuel quantity, etc. 11,967 cc engine was used in the experiment and the engine fuel ratio was determined in the way that the performance of dedicated CNG engine is corresponded to that of existing diesel engine. The performance and dedicated CNG engine were measured by changing the fuel injection timing. The dedicated CNG engine was proved to be good in describing the experimental results and according to the actual road test, acceleration and constant speed driving for dedicated CNG engine was better than existing diesel engine.

• 디지털산업정보학회논문지
• /
• 제19권2호
• /
• pp.69-78
• /
• 2023

In this paper, IO+5G dedicated hardware is developed and an AI device communication system equipped with a 5G is designed and tested. The AI device communication system equipped with a 5G receives the collected real-time images and the information collected from the IoT sensor in real time is to analyze the information and generates the risk detection events in the AI processing board. The event generated in the AI processing board creates a 5G channel in the dedicated hardware equipped with IO+5G. The created 5G channel delivers event video to the control video server. The 5G based dongle network enables faster data collection and more precise data measurement compared to wireless LAN and 5G routers. As a result of the experiment in this paper, the average test result of the 5G dongle network is about 51% faster than the Wi-Fi average test result in downlink and about 40% faster in uplink. In addition, when comparing the test result with terms of the 5G rounter to be set to 80% upload and 20% download, the average test result is that the 5G dongle network is about 11.27% faster when downloading and about 17.93% faster when uploading. when comparing the test result with terms of the the router to be set to 60% upload and 40% download, the 5G dongle network is about 11.19% faster when downlinking and about 13.61% faster when uplinking. Therefore, in this paper it describes that the developed 5G dongle network can improve the results by collecting data and analyzing it faster than wireless LAN and 5G routers.

• 한국간호교육학회지
• /
• 제29권4호
• /
• pp.405-414
• /
• 2023

Purpose: This study used a descriptive investigative design to compare the educational needs and priorities of education-dedicated nurses and preceptors regarding clinical nurse educator competency. Methods: A survey was conducted from March to April 2023 with 308 participants, including 140 education-dedicated nurses and 168 preceptors. The collected data were analyzed using descriptive statistics and a paired t-test with the IBM SPSS 26.0 program. For the purpose of analyzing educational needs, we further analyzed data through the Borich needs assessment and the locus for focus model. Results: Among the clinical nurse educator competency, both education-dedicated nurses and preceptors identified "new theory and practice" as the highest priority educational need. Additionally, education-dedicated nurses prioritized "teaching design ability," "teaching evaluation ability," and "evidence-based nursing/practice and research," while preceptors prioritized "clinical nursing knowledge" and "professional development ability" as their educational needs. Conclusion: While both education-dedicated nurses and preceptors responded that education is necessary for all the competency areas required of clinical nurse educators, variations were observed in their reported educational needs and priorities. Thus, it is imperative to develop and implement a differentiated education program for enhancing the competency of clinical nurse educators that considers the distinct requirements of education-dedicated nurses and preceptors.

• 한국의학물리학회지:의학물리
• /
• 제27권4호
• /
• pp.267-271
• /
• 2016

In this study, we present the commissioning and validation results of a dedicated scanning nozzle. The dedicated scanning nozzle is installed in one of the two gantry treatment rooms at Samsung Proton Therapy Center. Following a successful completion of the acceptance test, the commissioning process including the beam data measurement for treatment planning system has been conducted. Extended measurements have been conducted as a validation of the clinical performance of the nozzle and various quality assurance protocols have been prepared.