• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.1
• /
• pp.14-26
• /
• 2001

This paper presents an LMI(Lincar Matrix Inequalities) method for designing the optimal decoupling controller. The proposed controller based on the Two Degree-of-Freedom configuration considers both the performance of controller and decoupling properties. A minimal set of assumptions for existence of the decoupling controller formula is described in the state space formulas. The decoupling controller parameters are obtained from LMI methods for computational efficiency.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1587-1588
• /
• 2007

IPM(Interior Permanent Magnet) Machine의 전류 제어는 자기저항에 의존하는 토크특성 때문에 SPM(Surface Permanent Ma- gnet) Machine보다 복잡하다. 고성능 토크제어를 위해서는 d축 전류와 q축 전류의 동특성간의 상태 decoupling이 요구된다. 그러나 전류의 상태 동특성이 coupling된 인덕턴스의 변화(온도, 파라미터들의 부정확한 측정값)는 상태 decoupling을 어렵게 한다. 그래서 이러한 변화와 각각의 전류가 독립적으로 제어될 수 있게 여러 decoupling 방법들에 초점이 맞춰지고있다. 본 연구는 외란에 강하고, 특히 인덕턴스의 변화와 상관없는 이상적인 토크제어를 하기 위해 신경회로망을 이용하여 슬라이딩 평면(sliding surface)을 구성하고, SMC(Sliding Mode Control)를 이용하여 상태 cross-coupling의 decoupling을 위한 새로운 접근을 제안한다. 이 방법은 PI제어 성능과 SMC의 강인성을 알고리즘을 이용하여 결합한 것이라고 볼 수도 있다.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.4
• /
• pp.47-52
• /
• 2005

In this paper, the genetic algorithm is used to design a fixed order square decoupling $H_{\infty}$ controllers based on the Two-Degree-of-freedom standard model. The proposed decoupling $H_{\infty}$ controller which is minimizes the maximum energy in the output signal is designed to reduce the coupling properties between the input/output variables which make it difficult to control a system efficiently. A minimal set of assumptions for existence of the decoupling controller formula is described in the state-space formulas. It is verified by an example.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1617-1620
• /
• 2005

The current control for interior permanent magnet machines is more complicate than surface permanent magnet machine because of its torque characteristic depending on the reluctance. For high performance torque control, it requires state decoupling between the d-current and q-current dynamics. However the variation of the inductances, which couples the state dynamics of the currents, makes the state decoupling difficult. So some decoupling methods have developed to cope this variations and each current can be regulated independently. This paper presents a novel approach for fully decoupling the states cross-coupling using parameter adaptation. The adaptation method is based on the error between reference currents and the currents with state decoupling which have to follow the references. This method is more object-oriented than the other online parameter estimation methods in IPM machine and other electrical machines

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.220-220
• /
• 2000

In this paper, some non-interaction problems in tandem cold rolling mill are considered, which are required to control effectively a thickness of the cold .oiled strip. First, Interstand non-interactive compensate. (Interstand NIC) is designed for decoupling the interaction between stands. Next, a L2 optimization based pre-compensator is designed for decoupling the interaction between roll gap and strip tension in the stand. Finally, the effectness of the proposed decoupling methods is demonstrated via simulations.

• Journal of Power System Engineering
• /
• v.10 no.3
• /
• pp.81-87
• /
• 2006

This paper deals with an empirical model for decoupling control to control the refrigeration system effectively. The conventional control schemes of the system are mainly focused on representative two control methods, superheat control and capacity control. The capacity control is basically conducted to respond partial loading conditions on the purpose of energy saving. The superheat control is mainly carried out to maintain maximum coefficient of performance (COP). In the variable speed refrigeration system, the capacity and the superheat are controlled by inverters and electronic expansion valves respectively for saving energy and improving cost performance. The capacity and superheat can not be controlled independently because of interfering loop when the compressor speed and opening angle electronic expansion valve is varied. Therefore, we suggest decoupling model to eliminate the interfering loop at first. Next, each transfer function in decoupling control model is obtained from number of experiments.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.9
• /
• pp.33-42
• /
• 1998

If a ship diesel engine is operated by consolidated control with Controllable Pitch Propeller(CPP), the minimum fuel consumption is achieved together with the demanded ship speed. For this, it is necessary that the ship is operated on the ideal operating line which satisfies the minimum fuel consumption and that the pitch angle of CPP and throtle valve angle are controlled simultaneously. In this point of view, this paper presents a controller design method for a ship propulsion system with CPP based on the decoupling control theory. To do this, Linear Matrix Inequality(LMI) approach is introduced for the control system to satisfy the given $H_\infty$ control performance and robust stability in the presence of physical parameter perturbations. The validity and applicability of this approach are illustrated by simulation in the all operating ranges.

• Journal of Power System Engineering
• /
• v.3 no.2
• /
• pp.84-88
• /
• 1999

In this paper, systems described by state-space models are considered. For these systems, author studies the decoupling of linear systems and gives a sufficient condition for a system to be made feedback decouplable. Especially, the condition is given by LMI(Linear Matrix Inequality) form. Based on this condition, it is guaranteed that the system decoupling problem is achieved and the $H_{\infty}$ constraint is satisfied simultaneously. This result can be easily extended to the robust decoupling control system design problems.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.864-867
• /
• 2003

In this study, a controller which has a feedforward controller and two additional PI integrators was designed. But if a controller is used by only the integration of a feedforward controller and two additional PI integrators, the capability of a controller will decrease because the decoupling terms of current is feedback as the disturbance. Therefore the feedforward method with the decoupling compensation was proposed. The two additional PI integrators were replaced by two decoupling terms to simplify the calculation. The simulation and experimental using SynRM driving system were performed to verify the design of a improved decoupling feedforward controller.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.514-521
• /
• 2009

The current control for Interior-mounted Permanent Magnet Motor(IPM Motor) is more complicate than Surface-mounted Permanent magnet Motor(SPM Motor) because of its torque characteristic depending on the reluctance. For high performance torque control, it requirs state decoupling between d-axis current and q-axis current dynamics. However the variation of the inductances, which couples the state dynamics of the currents, makes the state decoupling difficult. So some decoupling methods have developed to cope this variation and each current can be regulated independently. This paper proposes a novel approach for fully decoupling the states cross-coupling using sliding mode control with virtual state for IPM Motor. As a result, in spite of the parameter uncertainty and disturbance, the proposed sliding surface can have the dynamics of nominal system controlled by PI controller.