• 한국음향학회지
• /
• 제19권3호
• /
• pp.63-71
• /
• 2000

본 논문에서는 표준 대역통과 필터와 무증폭 바이패스 이득의 조합을 이용한 구조에 근거하여 전문가용 디지털 오디오에 적합한 정교한 주파수응답을 갖고, 실시간 시스템에서 적은 계산량과 메모리로 구현이 용이한 2차 디지털 픽킹 필터의 설계방식을 제안하였다. 이와 같이 설계된 디지털 픽킹 필터는 이득요인에 따라 필터의 대역폭이 왜곡되는 단점을 Q-보정을 통해 제거하였으며, 컨포말 변환에 의한 설계보다 수학적으로 간단하고 구현이 용이하며, 적은 계산량 및 메모리를 필요로 한다.

• 농업과학연구
• /
• 제49권4호
• /
• pp.795-807
• /
• 2022

The development and commercialization of industrial genetically modified (GM) organisms is actively progressing worldwide, highlighting an increased need for improved safety management protocols. We sought to establish an environmental monitoring method, using real-time polymerase chain reaction (PCR) and propidium monoazide (PMA) treatment to develop a quantitative detection protocol for living GM microorganisms. We developed a duplex TaqMan quantitative PCR (qPCR) assay to simultaneously detect the selectable antibiotic gene, ampicillin (AmpR), and the single-copy Escherichia coli taxon-specific gene, D-1-deoxyxylulose 5-phosphate synthase (dxs), using a direct cell suspension culture. We identified viable engineered E. coli cells by performing qPCR on PMA-treated cells. The theoretical cell density (true copy numbers) calculated from mean quantification cycle (Cq) values of PMA-qPCR showed a bias of 7.71% from the colony-forming unit (CFU), which was within ±25% of the acceptance criteria of the European Network of GMO Laboratories (ENGL). PMA-qPCR to detect AmpR and dxs was highly sensitive and was able to detect target genes from a 10,000-fold (10^-4) diluted cell suspension, with a limit of detection at 95% confidence (LOD_95%) of 134 viable E. coli cells. Compared to DNA-based qPCR methods, the cell suspension direct PMA-qPCR analysis provides reliable results and is a quick and accurate method to monitor living GM E. coli cells that can potentially be released into the environment.

• 전자공학회논문지D
• /
• 제34D권9호
• /
• pp.28-35
• /
• 1997

A novel high-Q vertical jinductor for MMICs is proposed and characterized in a wide range of frequencies (DC~10 GHz) using the numerical methods such as the PeEC(partial equivalent element circuit), the FDM (finite difference method) and the MoM (method of moments). Electrical superiority of the vertical inductor to the horizontal is observed in terms of the magnetic flux linkage and the ground screening effect. The veritcal bondwire inductor is designed in consideration of the wire bonding feasibility and the optimum electrical peformance. This structure is also analyzed using the equivalent circuit and compared with the conventional spiral inductors From the calculated results, high Q-factor, inductance, and cut-off frequency are observed to be inherent characteristics of the veritcal bondwire inductor.

• ETRI Journal
• /
• 제38권1호
• /
• pp.185-194
• /
• 2016

In this paper, a novel rate control scheme for low delay video coding of High Efficiency Video Coding (HEVC) is proposed. The proposed scheme is developed by considering a new temporal prediction structure of HEVC. In the proposed scheme, the relationship between bit rate and quantization step is exploited firstly to formulate an accurate quadratic rate-quantization (R-Q) model. Secondly, a method of determining the quantization parameters (QPs) for the first frames within a group of pictures is proposed. Thirdly, an accurate frame-level bit allocation method is proposed for HEVC. Finally, based on the proposed R-Q model and the target bit allocated for the frame, the QPs are predicted for coding tree units by using rate-distortion (R-D) optimization. We compare our scheme against that of three other state-of-the-art rate control schemes. Experimental results show that the proposed rate control scheme can increase the Bjøntegaard delta peak signal-to-noise ratio by 0.65 dB and 0.09 dB on average compared with the JCTVC-I0094 and JCTVC-M0036 schemes, respectively, both of which have been implemented in an HEVC test model encoder; furthermore, the proposed scheme achieves a similar R-D performance to Wang's scheme, as well as obtaining the smallest bit rate mismatch error of all the schemes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.776-777
• /
• 2008

It is important to understand the relationship accurately between linkage flux distributions and machine characteristics for better design of multilayer-buried interior permanent magnet synchronous machines(IPMSM). This paper presents a improved calculation method for linkage flux of multilayer-buried IPMSM. From the analysis result, The proposed method shows that the calculated d,q linkage flux reflects a electromagnetic characteristic well in analysis model.

• 한국공간구조학회논문집
• /
• 제3권2호
• /
• pp.85-90
• /
• 2003

If we use a third order approximation for the displacement function of beam element in finite element methods, finite element solutions of beams yield nodal displacement values matching to beam theory results to have no connection with the number increasing of elements of beams. It is assumed that, as the member displacement value at beam nodes are correct, the calculation procedure of beam element stiffness matrix have no numerical errors. A the member forces are calculated by the equations of $\frac{-M}{EI}=\frac{{d^2}{\omega}}{dx^2}\;and\;\frac{dM}{dx}=V$, the member forces at nodes of beams have errors in a moment and a shear magnitudes in the case of smaller number of element. The nodal displacement value of plate subject to the lateral load converge to the exact values according to the increase of the number of the element. So it is assumed that the procedures of plate element stiffness matrix calculations has a error in the fundamental assumptions. The beam methods for the high accuracy ratio solution Is also applied to the plate analysis. The method of reducing a error ratio of member forces and element stiffness matrix in the finite element methods is studied. Results of study were as follows. 1. The matrixes of EI[B] and [K] in the equations of M(x)=EI[B]{q} and M(x) = [K]{q}+{Q} of beams are same. 2. The equations of $\frac{-M}{EI}=\frac{{d^2}{\omega}}{dx^2}\;and\;\frac{dM}{dx}=V$ for the member forces have a error ratio in a finite element method of uniformly loaded structures, so equilibrium node loads {Q} must be substituted in the equation of member forces as the numerical examples of this paper revealed.

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.360-368
• /
• 2011

This paper proposes an active frequency with a positive feedback in the d-q frame anti-islanding method suitable for a robust phase-locked loop (PLL) algorithm using the FFT concept. In general, PLL algorithms for grid-connected PV PCS use d-q transformation and controllers to make zero an imaginary part of the transformed voltage vector. In a real grid system, the grid voltage is not ideal. It may be unbalanced, noisy and have many harmonics. For these reasons, the d-q transformed components do not have a pure DC component. The controller tuning of a PLL algorithm is difficult. The proposed PLL algorithm using the FFT concept can use the strong noise cancelation characteristics of a FFT algorithm without a PI controller. Therefore, the proposed PLL algorithm has no gain-tuning of a PI controller, and it is hardly influenced by voltage drops, phase step changes and harmonics. Islanding prediction is a necessary feature of inverter-based photovoltaic (PV) systems in order to meet the stringent standard requirements for interconnection with an electrical grid. Both passive and active anti-islanding methods exist. Typically, active methods modify a given parameter, which also affects the shape and quality of the grid injected current. In this paper, the active anti-islanding algorithm for a grid-connected PV PCS uses positive feedback control in the d-q frame. The proposed PLL and anti-islanding algorithm are implemented for a 250kW PV PCS. This system has four DC/DC converters each with a 25kW power rating. This is only one-third of the total system power. The experimental results show that the proposed PLL, anti-islanding method and topology demonstrate good performance in a 250kW PV PCS.

• 지구물리와물리탐사
• /
• 제10권3호
• /
• pp.191-202
• /
• 2007

한반도 남부지역의 세부적인 지진파 감쇠특성 규명을 위해, 기존에는 적용이 불가능하였던 Q 토모그래피 역산을 위한 사전 수치검증 연구를 수행하였다. 특히 강지진동모사를 위해 일반적으로 사용되고 있는 추계학적 점지진원 지진동 모델(stochastic point-source ground-motion model; Boore, 2003)에서 사용되는 Q 값에 대한 2차원(2D; 2 Dimensional) 토모그래피 역산을 시도함으로써 역산 결과가 강지진동모사에 직접 활용될 수 있도록 하였다. 수치검증 방법으로는 Q 토모그래피 checkerboard 시험방법이 사용되었는데, 이를 위해 광역 단일 Q 모델의 추계학적 지진동모델 파라미터 역산결과의 지진원과 부지효과 모델 파라미터 값을 이용해서 관측자료와 지진규모-거리-주파수-오차 분포가 동일한 스펙트럼 합성자료를 생성하였다. 수치검증을 위한 Q 블록 격자의 총 개수는 75개(내륙지역=69개(약 $35{\times}44km^2$의 격자크기); 해양지역=6개)로 설정하였으며, $Q_0f^{\eta}$ 함수형태의 Q 블록 값은 $Q_0$=100, 500, ${\eta}=0.0{\sim}1.0$의 분포를 갖도록 하고, 파선의 깊이는 별도로 고려하지 않았다. 스펙트럼 합성자료 생성에 이용된 모델파라미터의 정해와 모델파라미터의 역산결과를 비교하기 위한 checkerboard 수치검증은 3단계에 걸쳐 수행되었는데, 1단계는 블록별 Q의 초기값 추정 단계이며, 2단계는 관측소별 부지증폭함수를 추정하는 단계, 마지막 3단계에서는 최종적인 Q를 도출하는 단계이다. 관측소별 부지증폭함수의 초기 추정값으로는 기 분류된 관측소 등급에 대한 평균 부지증폭함수(연관희, 서정희, 2007)가 사용되었으며, 3단계의 checkerboard 수치검증 결과 최종적으로 추정된 부지효과 모델에는 오차가 발생하였으나 블록별 Q의 정해는 만족할 정도로 추정할 수 있었다.

• 대한수학회보
• /
• 제51권2호
• /
• pp.329-338
• /
• 2014

In this paper, we study the method of upper and lower solutions and develop the generalized quasilinearization technique for the existence and approximation of solutions to some three-point nonlocal boundary value problems associated with higher order fractional differential equations of the type $$^c{\mathcal{D}}^q_{0+}u(t)+f(t,u(t))=0,\;t{\in}(0,1)$$ $$u^{\prime}(0)={\gamma}u^{\prime}({\eta}),\;u^{\prime\prime}(0)=0,\;u^{\prime\prime\prime}(0)=0,{\ldots},u^{(n-1)}(0)=0,\;u(1)={\delta}u({\eta})$$, where, n-1 < q < n, $n({\geq}3){\in}\mathbb{N}$, 0 < ${\eta},{\gamma},{\delta}$ < 1 and $^c\mathcal{D}^q_{0+}$ is the Caputo fractional derivative of order q. The nonlinear function f is assumed to be continuous.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1064-1065
• /
• 2015

단상 계통 연계형 전력 변환기에서 계통과 연계하기 위해서는 계통의 위상 정보를 정확히 측정하여 전력 변환기의 출력 주파수와 위상이 동일한 상태로 전류가 공급 되도록 해야 한다. 본 논문에서는 단상 d-q 좌표 변환 기법을 통한 위상 동기화 기법을 적용하여 왜곡된 계통전압이 d축 전압에 야기 되는 에러 성분을 최소화 하는 보상 기법을 제안한다. 제안된 기법은 동기 d축 전압을 일정한 주기로 적분하여 에러 성분을 최소화 한 후, PI제어를 통해 d축 전압을 0으로 수렴하게 하는 기법이다. 제안된 기법은 추가적인 하드웨어를 요구하지 않는다. 본 논문의 타당성을 검증하기 위해 3[kW]급 단상 계통 연계형 전력변환기 시작품을 제작하고 실험을 통해 증명하였다.