• 대한치과보철학회지
• /
• 제32권3호
• /
• pp.431-443
• /
• 1994

As the dental arch is the curve connecting the cusp tip of tooth, the dental arch form, composing of the occlusion, is one the important factors of occlusal reconstruction. Many studies about the horizontal dental arch form have been reported, but until now, it is unclear to infer the position of the teeth in dental arch form, to evaluate the effect of the horizontal dental arch form on chewing movement. The purpose of this study is to make objective criteria to infer the position of the teeth in dental arch. In this study, 100 subjects with individdual normal occlusion were evaluated. By multiple regression analysis on the basis of the relation of the canine and the first molar, the positions of teeth in dental arch were inferred. According to buccolingual relationship of maxillary to mandibular posterior teeth, the dental arch forms were classified into five groups, i, e. the normal group, the group which the maxillary second molar positions buccal side, the group which the maxillary premolars position buccal side, the group which the maxillary premolar position lingual side. From the results, objective criterial to infer the positons of the first premolar, the second premolar, the second molar in dental arch were made.

• 대한수학회지
• /
• 제52권5호
• /
• pp.945-954
• /
• 2015

Let ${\lambda}_f(n)$ denote the n-th normalized Fourier coefficient of a primitive holomorphic form f for the full modular group ${\Gamma}=SL_2({\mathbb{Z}})$. In this paper, we are concerned with ${\Omega}$-result on the summatory function ${\sum}_{n{\leqslant}x}{\lambda}^2_f(n^2)$, and establish the following result ${\sum}_{\leqslant}{\lambda}^2_f(n^2)=c_1x+{\Omega}(x^{\frac{4}{9}})$, where $c_1$ is a suitable constant.

• 대한수학회지
• /
• 제50권2호
• /
• pp.425-444
• /
• 2013

We construct some hyperbolic hyperelliptic space forms whose fundamental groups are generated by only two or three isometries. Each occurring group is obtained from a supergroup, which is an extended Coxeter group generated by plane re ections and half-turns. Then we describe covering properties and determine the isometry groups of the constructed manifolds. Furthermore, we give an explicit construction of space form of the second smallest volume nonorientable hyperbolic 3-manifold with one cusp.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.251-259
• /
• 2010

It is presented in this study a new efficient intelligent machining strategy, which can be used to remove the uncut volume at the boundary region of curved surfaces caused by cutter interference. The geometric form definitions and recognition of topological features of the surface triangulation mesh are used to generate cutter paths along successive and interconnected steepest pathways, that minimize the cusp height left after flat end milling. In order to machine the uncut volume gradually, the z-map cutter centers are adjusted to avoid cutter interference for the 6 kinds of avoidance types. And then, the generative subsequent paths are sequenced to determine the second step cutter paths for the next uncut volume. For the 2 kinds of test models with convex and concave surface region, the implemented software algorithm is evaluated by investigating the residual swelling of uncut volume for each machining step.

• East Asian mathematical journal
• /
• 제35권1호
• /
• pp.67-75
• /
• 2019

We investigate the averaging value of a random sampling of a Dirichlet series with some condition using Poisson distribution. Our result is the following: Let $L(s)={\sum}^{\infty}_{n=1}{\frac{a_n}{n^s}}$ be a Dirichlet series that converges absolutely for Re(s) > 1. If $X_t$ is an increasing random sampling with Poisson distribution and there exists a number $0<{\alpha}<{\frac{1}{2}}$ such that ${\sum}_{n{\leq}u}a_n{\ll}u^{\alpha}$, then we have $${\mathbb{E}}L(1/2+iX_t)=O(t^{\alpha}{\sqrt{{\log}t}})$$, for all sufficiently large t in ${\mathbb{R}}$. As a result, we get the behaviour of $L({\frac{1}{2}}+it)$ such that L is a Dirichlet L-function or a modular L-function, when t is sampled by the Poisson distribution.

• Journal of Chest Surgery
• /
• 제43권6호
• /
• pp.602-613
• /
• 2010

배경: 사람의 수명이 연장되면서 판막 질환이 점차 증가하는 가운데, 과거에는 심장 판막 이식에 기계 판막을 많이 사용하였으나, 혈액 응고 장애로 인한 출혈, 임신 시 태아의 기형 가능성, 판막의 급성 기계적 작용 부전, 평생 약을 복용해야 하는 불편함 등의 여러 합병증이 동반되는 단점이 있어, 조직 판막 사용이 증가하고 있고, 그 내구성을 높이기 위한 연구와 관심이 점차 증가하고 있다. 현재 사용하는 조직 판막은 외국계 회사의 수입된 제품으로서 그 구조나 도안에 이론적인 제안 등이 부족한 실정이다. 이에 본 연구는 돼지의 대동맥 및 폐동맥 판막의 구조에 대한 기하학적 분석을 시행하고, 각 수치를 계량화, 분석하여 그 3차원적 구조를 이해하여 대동맥 판막과 폐동맥 판막을 만들 수 있는 이론적 배경을 제시하고자 하였다. 대상 및 방법: 도축한 25마리의 돼지에서 채취한 대동맥 판막과 폐동맥 판막을 신선한 상태에서, 그리고 글루타알데하이드(GA) 용액으로 고정한 상태에서 판막의 각 구조물 수치를 2차원적으로 측정하여 그 배율을 계량화하고 분석하였다. 신선한 상태와 글루타알데하이드(GA) 용액으로 고정한 상태에서 판막엽 간 길이, 접합면 간 길이, 판막엽의 높이, 접합면 높이를 각각 측정하였다. 또한 이식 가능한 판막을 제작하기 위하여 스텐트의 도안으로 모양, 유순도에 따른 스텐드의 두께, 높이, 간격 및 판막 크기에 따른 심낭 판막엽의 크기, 모양, 두께 등을 도안하였다. 결과: 돼지 대동맥과 폐동맥 판막의 수치 및 각 구조물들의 배율을 구하였다. 대동맥 판막 및 폐동맥 판막은 각각 우측 관상동맥 첨판 및 우향 관상동맥 첨판의 크기가 상대적으로 제일 컸다. 무접합 관상동맥 첨판이 가장 작았으며(우향 관상동맥 첨판: 무접합 관상동맥 첨판: 좌향 관상동맥 첨판=1.00 : 0.88 : 1.00), 판막의 높이는 첨판의 크기에 비례하였다. 스텐트를 사용한 돼지 대동맥 판막은 외측 직경 크기를 19 mm부터 33 mm까지 정하였고, 이전에 정한 비율 및 스텐트 두께, 그리고 실제 판막 제작에 필요한 봉합 두께와 판막 주변 벽의 두께 등을 고려하여 스텐트의 높이 ($R{\times}1.4$, R: radius, 직경), 폭, 간격 수치를 정하였으며, 심낭을 이용한 판엽은 판막의 직경, 각 첨판 길이 ($2{\times}R$), 높이 ($R{\times}1.4$)와 첨판의 최소 접합면을 고려하여 스텐트 크기와 함께 모양을 도안하였다. 결론: 25개의 돼지 대동맥 판막과 폐동맥 판막의 구조물에 대한 수치를 측정하여 판막들의 기하학적 비율을 계산하고, 여려 크기의 이식형 돼지 대동맥 판막을 만들어 볼 수 있었으며, 또한 소의 심낭을 이용하여 다양한 표기의 판막을 만들어 볼 수 있는 이론적 근거를 만들 수 있었다. 향후 이러한 도안의 판막 제작 후 충분한 생체 내외의 실험 및 추가 연구가 필요할 것으로 생각된다.

• 치과방사선
• /
• 제11권1호
• /
• pp.59-66
• /
• 1981

The dens evaginatus was a developmental variation which has arisen as a result of an evagination of inner enamel epithelium into the enamel organ. It has been given various. names by authors and was thought to be confined to Mongolian race. This study was performed to observe the incidence of dens evaginatus, and its ill-effects on the teeth and surrounding structures in 6356 Korean students and 10227 Korean adults. In plaster model, analysis was performed in accordance with forms and location of dens evaginatus on the. occlusal surface in the premolars. The pathologic changes caused by dens evaginatus were observed in paralleling periapical radiograms The results were as follows: 1. The prevalence of dens evaginatus in the student's group was 2.6%, and showed no sex predilection in the occurrence of evaginated teeth. 2. The sequence of dens evaginatus was in order of mandibular 2nd premolar, mandibular 1st premolar, maxillary 2nd premolar, and maxillary 1st premolar, respectively. 3. Of the cases with dens evaginatus, 73.5 % occured bilaterally. 4. The nipple form was the most frequent in respect of elevation of tubercle on the, occlusal surface. 5. In the base form of the tubercle, the occurrence of grooved form was the highest. 6. In the maxilla, those cases which the tubercle arose from the lingual ridge of the buccal cusp were most predominant. And in the mandible, those cases which the tubercle arose from the center of the occlusal surface were the most frequent. 7. The pulpal and periapical complications were shown in 24.4% of evaginated teeth in. periapical radiogram.

• 대한치과기공학회지
• /
• 제11권1호
• /
• pp.115-120
• /
• 1989

Many attempts for the compfrt, esthetics and improvement of Masticatory function of the patients with removable prosthesis have been made for several decades. The search for the ideal denture occlusion has been going on in an effort to find the tooth form which provides maximum denture stability and masticatory efficiency without damaging the health of the underlying bone. For the purpose, the basic concept of lingualized occlusion were suggested by payne(1941) and pound(1973) discussed a similar occlusal concept and used term " lingualized occlusion." The purpose of this literature study is to clarify and amplify a method to achieve bilateral balanced occlusion with the occlusal arrangement termed " lingualized occlusion." Lingualized occlusion can be achieved by use of anatomic teeth for the mandibular denture. Lingualized occlusion can be used in most denture combination. It is particulary helpful when the patient places high priority on esthetics but a nonanatomic occlusal scheme is indicated by oral conditions such a severe alveolar resorption, a class II jaw relationship or displaceable supporting tissue. Advantages of lingualized occlusion are summarized as follows : 1) Most of the advantages attributed to both the anatomic and nonanatomic forms are retained. 2) Cusp form is more natural in appearance compare to nonanatomic tooth form. 3) Good pnetration of the food bolus is possible. 4) Bilateral mechanical balanced occlusion is readily obtained for a region around arotric relation. 5) Bertical forces are centralized on the mandibular teeth. Lingualized occlusion provides a useful combination of several occlusal concept. Many. advantages of anatomic and nonanatomic occlusions are accomplished but the lingualized occlusal concept is not is not a panacea, and all other procedures still must be carefully excuted.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.261-261
• /
• 1999

We observed leveling-off of the resistance in granular In/InO$_x$ thin films in the zero-temperature limit. The temperature T$_b$ at which the leveling-off appears gets larger as the sheet resistance R$_n$ increases. This is consistent with the concept that the leveling-off of the resistance is due to the dissipation of the bosonic phase and that the dissipation is enhanced as the resistance increases. The magnetic field dependence of the saturated resistance R$_b$ at low temperatures fits the modified square-root cusp-like form R$_b$/R$_n$=α exp[-b(B/B$_c$-1)$^{-1/2}$] for the magnetic field in the range B$_c$$_f$ where B$_c$ is the onset magnetic field of the resistance leveling-off. α and b are constants of order 1. For B>B$_f$ tansport properties are described by the theory of the fermi insulator. From the results, we attribute the leveling-off to the dissipative quantum tunneling of vortices, which supports the models predicting the vortex-motion-induced insulating phase related with the concept like"dirty boson" [1]l and "hose metal" [2].

• Journal of Magnetics
• /
• 제13권2호
• /
• pp.61-64
• /
• 2008

We studied the effect of the variation of the lattice constant on the electrical properties of $SrRuO_3$ thin films. In order to obtain films with different volumes, we varied the substrate temperature and oxygen pressure during the growth of the films on $SrTiO_3$ (001) substrates. The films were grown using a pulsed laser deposition method. The X-ray diffraction patterns of the grown films at low temperature and low oxygen pressure indicated the elongation of the c-axis lattice constant compared to that of the films grown at a higher temperature and higher oxygen pressure. The in-plane strain states are maintained for all of the films, implying the expansion of the unit-cell volume by the oxygen vacancies. The variation of the electrical resistance reflects the temperature dependence of the resistivity of the metal, with a ferromagnetic transition temperature inferred form the cusp of the curve being observed in the range from 110 K to 150 K. As the c-axis lattice constant decreases, the transition temperature linearly increases.