• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1418_1419
• /
• 2009

This paper presents the transient impedance when high current impulse up to 5 kA is applied to a scaled grounding grid in test field. For a realistic analysis of transient impedance on the high current impulse in the ground systems, grounding electrode installed outdoors and impulse current generator was used. The results were discussed based on its voltage and current trace, impulse impedance and V-I curve.

• Mass Spectrometry Letters
• /
• 제7권4호
• /
• pp.102-105
• /
• 2016

This study explored the feasibility of using a carburization technique to enhance the ion intensity of isotopic analysis of ultra-trace levels of uranium using thermal ionization mass spectrometry (TIMS). Prior to fixing uranium samples on TIMS filaments, graphite powder suspended in nitric acid was deposited on rhenium filaments. We observed an enhancement of $^{238}U^+$ intensity by a factor of two when carburization was used, and were able to roughly optimize the amount of graphite powder necessary for carburization. The positive shift in heating current when evaporating filaments upon carburization implies that uranium was chemically altered by carburization, when compared to normal fixation processes. The good agreement between our method and known standards down to an ultra-trace level shows that the proposed technique can be applied to isotopic uranium analysis down to abundances of ~10 pg.

• 융합보안논문지
• /
• 제5권2호
• /
• pp.43-50
• /
• 2005

본 논문에서는 리눅스 커널 백도어 침입자에 대한 추적과 커널 백도어의 공격에 대한 대응방법을 다룬다. 해커는 일반적으로 시스템에 침입하여 접속로그파일을 지우거나 위조된 주소정보를 사용하기 때문에 현재 로그기반의 침해사고 분석방법으로는 침입자를 추적하는데 한계가 있다. 이에 대한 해결책으로 DeFor 시스템을 제안한다. 이 시스템은 삭제된 로그복구와 전체 하드디스크 이미지 증거 분석을 통하여 침입자 위치를 추적하고, 신속하게 대응함으로써 해킹 피해를 최소화할 수 있다.

• 안보군사학연구
• /
• 통권2호
• /
• pp.285-314
• /
• 2004

The forms of current war are diversified over the pan-national industry. Among these, one kind of threats which has permeated the cyber space based on the advanced information technology causes a new type of war. C4ISR, the military IT revolution, as a integrated technology innovation of Command, Control, Communications, Computer, Intelligence, Surveillance and Reconnaissance suggests that the aspect of the future war hereafter is changing much. In this paper, we design the virtual decoy system and intrusion trace marking mechanism which can capture various attempts and evidence of intrusion by hackers in cyber space, trace the penetration path and protect a system. By the suggested technique, we can identify and traceback the traces of intrusion in cyber space, or take a legal action with the seized evidence.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1889-1892
• /
• 2002

In this paper, we propose the self-autonomous algorithm for mobile robot system (MRS). The proposed mobile robot system which is learned by learning with the neural network can trace the target at the same distances. The mobile robot can use ultrasonic sensors and calculate the distance between target and mobile robot. By teaming the setup distance, current distance and command velocity, the robot can do intelligent self-autonomous drive. We use the neural network and back-propagation algorithm as a tool of learning. As a result, we confirm the ability of tracing the target with proposed mobile robot.

• Bulletin of the Korean Chemical Society
• /
• 제20권8호
• /
• pp.910-916
• /
• 1999

A current interest in chemistry concerns traceability of analytical measurements to the International System of Units (SI) and the proper estimation of their uncertainties in accordance with the internationally agreed guide provided by the International Organization for Standardization (ISO). Isotope dilution mass spectrometry (IDMS) is regarded as a primary method, which make the measurement results traceable to SI units without significant empirical correction factors. Our laboratory, as the national standards institute of Korea, participated in an intercomparison of environmental analysis, pp'-DDE in corn oil, which was organized by the CCQM under supervision of the CIPM to test feasibility of IDMS as a primary method for the trace analysis of organic compounds. In this report, we provide basic equations used for the calculation of the concentration of the analyte in a sample and a precise description of the processes for the evaluation of the uncertainties of the measurement results. Also, we report the experimental conditions adopted to improve the accuracy of the IDMS measurement. The principles contained in ？？Guide to the Expression of Uncertainty in Measurement'' provided by ISO are followed for the uncertainty evaluation.

• Current Optics and Photonics
• /
• 제7권4호
• /
• pp.457-462
• /
• 2023

Quantitative measurement of trace ethane is important in environmental science and biomedical applications. For these applications, we typically require a few tens of part-per-trillion level measurement sensitivity. To measure trace-level ethane, we constructed a cavity ring-down spectroscopy setup in the 3.37 ㎛ mid-infrared wavelength range, which is applicable to multi-species chemical analysis. We demonstrated that the detection limit of ethane is approximately 300 parts per trillion, and the measured concentration is in agreement with the amounts of the injected sample. We expect that these results can be applied to the chemical analysis of ethane and applications such as breath test equipment.

• 조명전기설비학회논문지
• /
• 제25권2호
• /
• pp.137-142
• /
• 2011

In this paper, the fault current limiting and the hysteresys characteristics of a superconducting fault current limiter (SFCL) using magnetic coupling of two coils on the iron core with an air-gap were analyzed. The introduction of the air-gap in the SFCL with magnetically coupled two coils can suppress the saturation of the iron-core and, on the other hand, make the limiting impedance of the SFCL decreased, which results from the increase of the exciting current. To analyze the effect of the aig-gap on the fault current limiting characteristics of the SFCL, the hysteresys curves of the iron core comprising the SFCL were derived from the short-circuit experiment and the variation in the voltage-current trace of the SFCL during the fault period was analyzed. Through the comparison with the current limiting characteristics of the SFCL without air-gap, the air-gap could be confirmed to contribute to the suppression of the iron core's saturation through the increase of the SFCL's burden from the short-circuit current.

• The Korean Journal of Physiology and Pharmacology
• /
• 제2권1호
• /
• pp.95-100
• /
• 1998

The conductance change evoked by step depolarization was studied in primarily cultured rat adrenal chromaffin cells using patch-clamp and capacitance measurement techniques. When we applied a depolarizing pulse to a chromaffin cell, the inward calcium current was followed by an outward current and depolarization-induced exocytosis was accompanied by an increase in conductance trace. The slow inward tail current which has the same time course as the conductance change was observed in current recording. The activation of slow tail current was calcium-dependent. Reversal potentials agreed with Nernst equation assuming relative permeability of $Cs^+\;to\;K^+$ is 0.095. The outward current and tail current were blocked by apamin (200 nM) and d-tubocurarine (2 mM). The conductance change was blocked by apamin and did not affect membrane capacitance recording. We confirmed that conductance change after depolarization comes from the activation of the SK channel and can be blocked by application of the SK channel blockers. Consequently, it is necessary to consider blocking of the SK channel during membrane capacitance recording.

• 한국정밀공학회지
• /
• 제14권9호
• /
• pp.80-89
• /
• 1997

Die sinking electrical discharge machining(EDM) was conducted for ceramic composite of 33 weight percent TiC based on AI$_{2}$O$_{3}$ ceramic matrix according to the change of current and duty factor(DF). Material removal rate(MRR) was increased as the current and the duty factor increased, but better surface mor-pholoty was obtained in the region of lower current and duty factor. From the scanning electron microscopy(SEM) photographs and the energy dispersive X-ray spectroscopy(EDX) of the EDMed surface, EDM trace formed by one discharge spark was analyzed. Although the bending strength after EDM was highly decreased, reliability obtained by weibull analysis was increased twice. The bending strength was recovered or more by barrel polishing after EDM. From the FEM analysis of temperature for one spark, the possible melting region of AI$_{2}$O$_{3}$and TiC was obtained.