• Journal of Technologic Dentistry
• /
• v.33 no.3
• /
• pp.227-236
• /
• 2011

Purpose: The purpose of this study was to reduce the remake rate of dental prosthesis. We examined remake cause and major factor of dental prosthesis to determine methods for raising dental prosthesis satisfaction. Methods: Subjects included dental technicians in the metropolitan areas of the cities of Daegu and Gyeong-buk. Surveys were filled out by consenting dental technicians. Statistical analysis was done using SPSS version 19.0 for Windows. We determined frequencies and percentage, calculating means, and standard deviations, and determining statistical significance using t-tests, analysis of variance. Results: Impression or material transform is high among remake cause and margin is high among remake major factor. Crown class showed differences in General characteristics associated with age, number of employees, and number of connection dental. Porcelain class showed differences in General characteristics associated with age, number of employees, and number of connection dental. Denture class showed differences in General characteristics associated with age, monthly salaray, and career. Implant class showed differences in General characteristics associated with age, education, and career. Conclusion: In order to reduce remake rate of dental prosthesis, communication of dentist, dental technician, and the patient are require and correct information of patient and dental prosthesis are need.

• Journal of Korean Society of Forest Science
• /
• v.104 no.1
• /
• pp.104-110
• /
• 2015

The objective of this study was to develop allometric equations for the estimation of crown fuel biomass of Pinus koraiensis in Korea. A total of twenty four representative sample trees were destructively sampled in Gapyeong, Hongcheon, and Jeongseon. Crown fuels were weighed separately for each fuel category by size class and by living and dead. The results of this study showed that the needles contributed the largest biomass (16.6 kg, 34.7%), followed by live branches with size ranging from 2~4 cm (9.0 kg, 18.9%), 1~2 cm (6.6 kg, 13.8%), <0.5 cm (5.1 kg, 10.6%), 0.5~1 cm (4.9 kg, 10.3%), and dead branches (3.2 kg, 6.8%), while the live branches with 4 cm (2.4 kg, 4.9%) as the lowest. The adjusted coefficient of determination values were the highest ($R^2_{adj}=0.6021{\sim}9742$) and standard error of estimate were the lowest (S.E.E.=0.2018~0.7271) in allometric equation $lnWt={\beta}_0+{\beta}_1lnD$. The available fuels that are consumed during crown fires (i.e., needles and twigs with diameter less than 1 cm) comprised 55.6% of the total crown fuel biomass.

• The korean journal of orthodontics
• /
• v.21 no.3
• /
• pp.711-722
• /
• 1991

The first patient of this case was 13 year and 8 month old girl who had the Angle's class I malocclusion with uneruption of upper left central incisor and left canine. The second patient was 12 year old boy who had the Angle's class I malocclusion with uneruption of right central incisor. After surgical exposure of impacted teeth of those patients and bonding of attachment on exposed crown, those teeth were orthodontically pulled with removable appliances. The results were obtained as follow. 1. The functionally proper occlusion was established by guidance of the impacted teeth into the normal position in the arch. 2. Establishment of esthetic and balanced arch form was achieved. 3. The possibility of restorative prosthetic treatment induced by extraction of impacted teeth was eliminated. 4. The psychologic relief of pubertal patient who was very sensitive to facial esthetics was gained.

• The korean journal of orthodontics
• /
• v.47 no.3
• /
• pp.167-175
• /
• 2017

Objective: To evaluate the differences in maxillomandibular transverse measurements at either the crown or the estimated center of resistance (CR), and to compare values between normal occlusion and Class III malocclusion groups. Methods: Dental casts and computed tomography (CT) data from 30 individuals with normal occlusion and 30 with skeletal Class III malocclusions were evaluated. Using the casts, dental arch widths (DAWs) were measured from the cusp tips, and basal arch widths (BAWs-cast) were measured as the distance between the points at the mucogingival junction adjacent to the respective cusp tips. The BAWs determined from CT (BAWs-CT) images were measured from the estimated CRs of the teeth. Results: None of the DAW measurements or maxillomandibular DAW differences showed statistically significant intergroup differences. In contrast, the maxillary BAWs-CT and BAWs-cast were lesser in the Class III malocclusion group than in the normal occlusion group. The mandibular BAWs-CT were significantly greater in the Class III malocclusion group than in the normal occlusion group. Moreover, the maxillomandibular BAW differences on both CT and cast showed significant intergroup differences in all transverse measurements. Conclusions: The maxillomandibular DAW differences showed no significant intergroup differences. In contrast, the maxillomandibular BAW differences on both CT and cast showed significant intergroup differences in all transverse measurements. The maxillomandibular BAW differences at the estimated CRs, measured using CT or casts, can reveal underlying transverse maxillary basal arch deficiencies in patients with skeletal Class III malocclusions.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.14 no.2
• /
• pp.27-42
• /
• 1986

The vegetation structure in the Hoo - Won, Changduk Palace in Seoul was analysed on 10 sites sampled for understanding structure of natural vegetation. The main vegetational survey was conducted during July, 1985 and actual vegetaion and degree of natural vegetaion types were surveyed additionally. The result summarized of this research are as follows. 1) The physical - chemical conditions of soil showed middle class. This might be derived by short succession period from Pine forest to decidious broadleaf forest and artificial impact by human intervention. 2) When considering dominance species by crown story, Quercus aliena was a dominant species over all site and Castanea crenata, Prunus sargentii and Quercus variabilis appeared as a dominant species locally at upper story. Styrax story and Rhododendron mucronulatum, Styrax japonica, Stephanandra incisa and Lespedeza spp. at lower story. 3) The distances kept by trees per crown story are as follows. The mean distances between trees were 4.5-5.5m at upper story, 2.8-3.3m at middle story. On the other hand, the mean distances between dominant species were 6-8m at upper story, 5-9m at middle story. 4) The vegetation in this area was not developed yet into dominant species community according to the similarity analysis. The natural vegetation was dominated by Quercus spp. especially Quercus aliena according to the analysis of species diversity, relative dominance by story and DBH class. On the orther hand, succession to climax stage dominated by shade tolerent species will take a long time due to little appearance of shade tolerence species by previous heavy artificial impacts on understory species. 5) Quercus forest took possesion of 71.3%(27.37ha) of total forest area when considering the actual vegetation and especially Quercus aliena community covered 53.2%(15.21ha). Carpinus laxiflora community, one of the climax species in temperate zone, took possesion of 1.0%(0.3ha) and Pine densiflora was almost disappeared due to species competition. 6) According to the degree of natural vegetation types, the possession of degree of 6-9 was 60.6% and degree of 7-8, substitute vegetation, was 15.5%. The possesion of degree of 9 which consists of over 50 years old trees simliar to natural vegetaion was the highest, 43.1% in this area. Therefore continuous protection in this area of degree of 9 should be recommended.

• The korean journal of orthodontics
• /
• v.49 no.3
• /
• pp.161-169
• /
• 2019

Objective: To evaluate the effectiveness of the Frog appliance in three dimensions by using cone-beam computed tomography (CBCT) images. Methods: Forty patients (21 boys and 19 girls), averaged 11.7 years old, with an Angle Class II division 1 malocclusion were included in our study. They had either late mixed dentition or early permanent dentition, and the maxillary second molars had not yet erupted. All patients underwent CBCT before and after the treatment for measuring changes in the maxillary first molars, second premolars, central incisors, and profile. Paired-samples t-test was used to compare the mean difference in each variable before treatment and after the first phase of treatment. Results: The maxillary first molars were effectively distalized by 4.25 mm (p < 0.001) and 3.53 mm (p < 0.05) in the dental crown and root apex, respectively. The tipping increased by $2.25^{\circ}$, but the difference was not significant. Moreover the teeth moved buccally by 0.84 mm (p < 0.05) and 2.87 mm (p < 0.01) in the mesiobuccal and distobuccal cusps, respectively, whereas no significant changes occurred in the root apex. Regarding the anchorage parts, the angle of the maxillary central incisor's long axis to the sella-nasion plane increased by $2.76^{\circ}$ (p < 0.05) and the distance from the upper lip to the esthetic plane decreased by 0.52 mm (p = 0.01). Conclusions: The Frog appliance effectively distalized the maxillary molars with an acceptable degree of tipping, distobuccal rotation, and buccal crown torque, with only slight anchorage loss. Furthermore, CBCT image demonstrated that it is a simple and reliable method for three-dimensional analysis.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.678-688
• /
• 2021

This study was conducted to provide growth characteristics and stand information in preparation for natural regeneration method and silvicultural treatment of seed tree method in Korean red pine stands by using the field inventoried data 18 years after the seed tree regeneration method in 2001 and analyzing the stand and sapling characteristics. The study area was located in the Research Forest of Kangwon National University, Chuncheon-si, Gangwon-do. In November 2018, we collected tree measurement factors, such as diameter at breast height (DBH), height, crown class, stem quality, tree age, and annual height increment on the established plots. We calculated the basal area, volume, height-diameter ratio (HD ratio), and additional stand density variables such as the relative density and %stocking to analyze the managed stands. The number of mother trees was 58 trees/ha, with a 17.7% stocking level, whereas the number of saplings was 2,330 trees/ha, with a 79.0% stocking level. In germination, the age distribution of saplings ranged from 2001 to 2007, with most belonging to 15-16 years. The development condition of saplings was 10 cm in DBH and 8 m in height. DBH and height were higher as the crown class is more dominant, and this difference was statistically significant in the analysis of variance and Duncan's multiple comparison test (p<0.0001). HD ratio ranged mostly between 80% and 90%, and more than 95% of sapling stems were of high quality, with a straight, unbroken top, non-sweep, and non-diseased stem. On average, the annual height increment of saplings was 21.9 cm at 1 year, 43.3 cm at 5 years, 54.3 cm at 10 years, and 64.3 cm at 15 years. The overall height growth with age increased smoothly. According to the analysis of covariance, the annual height growth by crown class differed significantly. The regression analysis parameters revealed that annual height growth increased with age and dominant crown class.

• Journal of Korean Society of Forest Science
• /
• v.5 no.1
• /
• pp.27-32
• /
• 1966

Taking an opportunity of the application of clearcutting method, 140 red pine (Pinus densiflora Sieb. et Zucc.) trees grown at Chon-nam province, the southern part of South Korea, were fellen and the tree height, clear-bole length, D.B.H. diameter at base(0.2m above from the ground line) and the length of the longest branch were measured. The correlation between factors mentioned were analysed. The results are summarized as follows: 1. The correlation between crown length and tree height (r=0.821) was sinificant. 2. The correlation between the diameter at base and D.B.H. was highly significant (r=0.961). D.B.H. can be calculated from multiplying the diameter at base by 0.88. 3. A weak relation between D.B.H and tree height was abserved. 4. The positive correlation between tree height and clear-bole-length was calculated, but it was not sharp between D.B.H. and the length of the longest branch. 5. The height, basal area, D.B.H. and volume increment by tree class calculated from the data of the stem analysis are presented (Tab. 3~10).

• Journal of the East Asian Society of Dietary Life
• /
• v.1 no.3
• /
• pp.239-257
• /
• 1991

To examine the next following day party and the next following evening party in the Man Kyong Geon, the authors analyzed“Jin Chan Eui Gue”, which is a historical record, published in 1887(King Go-Jong). The results obtained from the study were as follows, 1. The dining tables of next following day party were composed of two types:fixed arranging tables(22), and taking-away tables. 2. The dinind tables of next following evening party were also composed of two types:fixed arranging tables(6), and taking-away tables. 3. Food and flowers were distributed to the 290 attendants at the next following evening party. 5. According to the status or class of the attendants, the pattern or size of table settings were differentiated in the kinds of food, heights of food, flowers china ware etc. 6. Arrangements of the next following day party and the next following evening party were the same as those of the main party. 7. The arranged seat of the Crown Prince was facing the west. 8. In the arrangements of tables for the Crown Prince, the heights of food on dishes as following levels, 1 dish : 1chok(1척) 6 dishes : 8 chon(8촌) 5 dishes : 7 chon(촌)

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.142-147
• /
• 2010

Cryptand resins have been synthesized from 1-aza-18-crown-6 macrocyclic ligand attached to styrene (2th petroleum in 4th class hazardous materials) divinylbenzene copolymer with crosslinkage of 1%, 2%, 10%, and 18% by substitution reaction. The synthesis of these resins was confirmed by the content of chlorine, element analysis, surface area (BET), and IR-spectroscopy. The effects of pH, time and crosslinkage on adsorption of metal ion from water fire extinguishing agentby synthetic resin adsorbent were investigated. Metal ions showed a great adsorption over pH 3 and adsorption equilibriumof metal ions was about two hours. The adsorption selectivity determined in water was in the increasing order of sodium ($Na^{1+}$) > zinc ($Zn^{2+}$) > chromium ($Cr^{3+}$) ion. The adsorption was in the order of 1%, 2%, 10%, and 18% crosslinkage resin.